[U-Boot] [PATCH 2/2] mx6sabreauto: README: Adjust the binary name after DM conversion

[Peng Fan]

> -----Original Message-----
> From: Fabio Estevam [mailto:festevam at gmail.com]
> Sent: 2019年2月26日 20:36
> To: sbabic at denx.de
> Cc: dl-uboot-imx <uboot-imx at nxp.com>; Peng Fan <peng.fan at nxp.com>;
> Abel Vesa <abel.vesa at nxp.com>; u-boot at lists.denx.de; Fabio Estevam
> <festevam at gmail.com>
> Subject: [PATCH 2/2] mx6sabreauto: README: Adjust the binary name after
> DM conversion
> 
> After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix
> the README file accordingly.
> 
> Signed-off-by: Fabio Estevam <festevam at gmail.com>

Acked-by: Peng Fan <peng.fan at nxp.com>

> ---
>  board/freescale/mx6sabreauto/README | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/board/freescale/mx6sabreauto/README
> b/board/freescale/mx6sabreauto/README
> index e8c589b92a..4c0fda1a2d 100644
> --- a/board/freescale/mx6sabreauto/README
> +++ b/board/freescale/mx6sabreauto/README
> @@ -9,15 +9,15 @@ $ make mx6sabreauto_defconfig
> 
>  $ make
> 
> -This will generate the SPL and u-boot.img binaries.
> +This will generate the SPL and u-boot-dtb.img binaries.
> 
>  - Flash the SPL binary into the SD card:
> 
>  $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
> 
> -- Flash the u-boot.img binary into the SD card:
> +- Flash the u-boot-dtb.img binary into the SD card:
> 
> -$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
> +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
> 
>  Booting via Falcon mode
>  -----------------------
> @@ -32,15 +32,15 @@ $ make mx6sabreauto_defconfig
> 
>  $ make
> 
> -This will generate the SPL image called SPL and the u-boot.img.
> +This will generate the SPL image called SPL and the u-boot-dtb.img.
> 
>  - Flash the SPL image into the SD card:
> 
>  $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
> 
> -- Flash the u-boot.img image into the SD card:
> +- Flash the u-boot-dtb.img image into the SD card:
> 
> -$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync
> +$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 && sync
> 
>  Create a FAT16 boot partition to store uImage and the dtb file, then copy the
> files there:
> 
> --
> 2.17.1