[U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support

Priyanka Jain priyanka.jain at nxp.com
Tue Feb 12 08:44:05 UTC 2019



>-----Original Message-----
>From: Ashish Kumar
>Sent: Thursday, January 24, 2019 11:04 AM
>To: Priyanka Jain <priyanka.jain at nxp.com>; u-boot at lists.denx.de; York Sun
><york.sun at nxp.com>
>Subject: RE: [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support
>
>
>
>> -----Original Message-----
>> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Priyanka Jain
>> Sent: Thursday, January 24, 2019 10:52 AM
>> To: u-boot at lists.denx.de; York Sun <york.sun at nxp.com>
>> Cc: Priyanka Jain <priyanka.jain at nxp.com>
>> Subject: [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot
>> support
>>
>> Add u-boot enviroments to support distro boot which scan boot.scr from
>> external storage devices (e.g. SD/USB/SCSI disk) and execute autoboot
>> script
>>
>> Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
>> ---
>> Depends on
>>
>https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat
>> ch
>work.ozlabs.org%2Fpatch%2F990094%2F&data=02%7C01%7CAshish.Ku
>>
>mar%40nxp.com%7Ca8f46378f4674e15200208d681bbf3a8%7C686ea1d3bc2
>>
>b4c6fa92cd99c5c301635%7C0%7C0%7C636839041601258920&sdata=g
>>
>Sg%2FH8h7cSD8dDO533bs6%2B9kRlHAsTub3HrVq6fzrbY%3D&reserved=
>> 0
>> Changes for v3:
>>  Add USB as boot target device
>>
>> Changes for v2:
>>  xspi_bootcmd, sd_bootcmd env variables are  dependent on board. So,
>> move the definition  from lx2160a_common.h file to lx2160ardb.h file
>>
>>  configs/lx2160ardb_tfa_defconfig |  3 +-
>> includefigs/lx2160a_common.h | 85
>> +++++++++++++++++++++++++++++++++++-----
>>  include/configs/lx2160ardb.h     | 29 +++++++-------
>>  3 files changed, 91 insertions(+), 26 deletions diff --git
>> a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
>> index 67ba96b..8fb4950 100644
>> --- a
>> +++ b/configs/lx2160ardb_tfa_defconfig
>> @@ -6,7 +6,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
>>  CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
>>  CONFIG_NR_DRAM_BANKS=3
>>  CONFIG_DM=y
>> -CONFIG_FIT=y
>>  CONFIG_FIT_VERBOSE=y
>>  CONFIG_OF_BOARD_SETUP=y
>>  CONFIG_OF_STDOUT_VIA_ALIAS=y
>> @@ -14,7 +13,7 @@ CONFIG_TFABOOT=y
>>  CONFIG_BOOTDELAY=10
>>  CONFIG_USE_BOOTARGS=y
>>  CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0
>> earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000
>> default_hugepagesz=1024m hugepagesz=1024m hugepages=2
>> pci=pcie_bus_perf"
>> -# CONFIG_CMD_IMLS is not set
>> +# CONFIG_USE_BOOTCOMMAND is not set
>>  CONFIG_CMD_GREPENV=y
>>  CONFIG_CMD_EEPROM=y
>>  CONFIG_CMD_GPT=y
>> diff --git a/include/configs/lx2160a_common.h
>> b/include/configs/lx2160a_common.h
>> index 41931e5..0e0e72d 100644
>> --- a/include/configs/lx2160a_common.h
>> +++ b/include/configs/lx2160a_common.h
>> @@ -193,16 +193,6 @@ unsigned long get_board_ddr_clk(void);
>>  #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip
>size
>> */
>>
>>  /* Initial environment variables */
>> -#define XSPI_NOR_BOOTCOMMAND	"fsl_mc apply dpl
>0x20d00000;" \
>> -				"sf probe 0:0;" \
>> -				"sf read 0xa0000000 0x1000000 0x3000000;"
>> \
>> -				"bootm 0xa0000000"
>> -
>> -#define SD_BOOTCOMMAND		"mmc read 0xa0000000
>0x6800
>> 0xA0;" \
>> -				"fsl_mc apply dpl 0xa0000000;" \
>> -				"mmc read 0xb0000000 0x8000 0x1d000;" \
>> -				"bootm 0xb0000000"
>> -
>>  #define XSPI_MC_INIT_CMD			\
>>  	"fsl_mc start mc 0x20a00000 0x20e00000\0"
>>
>> @@ -211,4 +201,79 @@ unsigned long get_board_ddr_clk(void);
>>  	"mmc read 0x80100000 0x7000 0x800;"	\
>>  	"fsl_mc start mc 0x80000000 0x80100000\0"
>>
>> +#define EXTRA_ENV_SETTINGS			\
>> +	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
>> +	"ramdisk_addr=0x800000\0"		\
>> +	"ramdisk_size=0x2000000\0"		\
>> +	"fdt_high=0xa0000000\0"			\
>> +	"initrd_high=0xffffffffffffffff\0"	\
>> +	"fdt_addr=0x64f00000\0"			\
>> +	"kernel_start=0x1000000\0"		\
>> +	"kernelheader_start=0x800000\0"		\
>> +	"scriptaddr=0x80000000\0"		\
>> +	"scripthdraddr=0x80080000\0"		\
>> +	"fdtheader_addr_r=0x80100000\0"		\
>> +	"kernelheader_addr_r=0x80200000\0"	\
>> +	"kernel_addr_r=0x81000000\0"		\
>> +	"kernelheader_size=0x40000\0"		\
>> +	"fdt_addr_r=0x90000000\0"		\
>> +	"load_addr=0xa0000000\0"		\
>> +	"kernel_size=0x2800000\0"		\
>> +	"kernel_addr_sd=0x8000\0"		\
>> +	"kernel_size_sd=0x1d000\0"              \
>> +	"console=ttyAMA0,38400n8\0"		\
>> +	BOOTENV					\
>> +	"mcmemsize=0x70000000\0"		\
>> +	XSPI_MC_INIT_CMD				\
>> +	"boot_scripts=lx2160ardb_boot.scr\0"	\
>> +	"boot_script_hdr=hdr_lx2160ardb_bs.out\0"	\
>> +	"scan_dev_for_boot_part="		\
>> +		"part list ${devtype} ${devnum} devplist; "	\
>> +		"env exists devplist || setenv devplist 1; "	\
>> +		"for distro_bootpart in ${devplist}; do "	\
>> +			"if fstype ${devtype} "			\
>> +				"${devnum}:${distro_bootpart} "	\
>> +				"bootfstype; then "		\
>> +				"run scan_dev_for_boot; "	\
>> +			"fi; "					\
>> +		"done\0"					\
>> +	"scan_dev_for_boot="					\
>> +		"echo Scanning ${devtype} "			\
>> +			"${devnum}:${distro_bootpart}...; "	\
>> +		"for prefix in ${boot_prefixes}; do "		\
>> +			"run scan_dev_for_scripts; "		\
>> +		"done;\0"					\
>> +	"boot_a_script="					\
>> +		"load ${devtype} ${devnum}:${distro_bootpart} "	\
>> +			"${scriptaddr} ${prefix}${script}; "	\
>> +		"env exists secureboot && load ${devtype} "	\
>> +			"${devnum}:${distro_bootpart} "		\
>> +			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
>> +			"&& esbc_validate ${scripthdraddr};"	\
>> +		"source ${scriptaddr}\0"
>> +
>> +#define XSPI_NOR_BOOTCOMMAND
>> 	\
>> +			"env exists mcinitcmd && env exists secureboot "\
>> +			"&& esbc_validate 0x20780000; "
>> 	\
>> +			"env exists mcinitcmd && "			\
>> +			"fsl_mc lazyapply dpl 0x20d00000; "		\
>> +			"run distro_bootcmd;run xspi_bootcmd; "
>> 	\
>> +			"env exists secureboot && esbc_halt;"
>> +
>> +#define SD_BOOTCOMMAND
>	\
>> +		"env exists mcinitcmd && mmcinfo; "		\
>> +		"mmc read 0x80001000 0x6800 0x800; "		\
>> +		"env exists mcinitcmd && env exists secureboot "	\
>> +		" && mmc read 0x80780000 0x3C00 0x10 "		\
>> +		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
>> +		"&& fsl_mc lazyapply dpl 0x80001000;"		\
>> +		"run distro_bootcmd;run sd_bootcmd;"		\
>> +		"env exists secureboot && esbc_halt;"
>> +
>> +#define BOOT_TARGET_DEVICES(func) \
>> +	func(USB, usb, 0) \
>> +	func(MMC, mmc, 0) \
>> +	func(SCSI, scsi, 0)
>Dhcp can also be added here.
>
>Regards
>Ashish


Dhcp not tested yet. 
To add dhcp support, additional patch can be submitted later-on after proper testing
Priyanka

<snip>

>>
>> --
>> 2.7.4
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flis
>> ts.de
>> nx.de%2Flistinfo%2Fu-
>>
>boot&data=02%7C01%7CAshish.Kumar%40nxp.com%7Ca8f46378f4674e
>>
>15200208d681bbf3a8%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%
>>
>7C636839041601258920&sdata=B2KWMSyxQFkzBpZM5FWzAUQvDeQl5
>> 9%2F6oAk5vTWHhL4%3D&reserved=0


More information about the U-Boot mailing list