[U-Boot] [PATCH v2 14/23] apalis_imx6: add distroboot support

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Add support for distro boot. This is especially helpful for external
devices. There is a global boot command which scans a predefined
list of boot targets:
  run distro_bootcmd

As well as direct boot commands such as:
  run bootcmd_mmc1
  run bootcmd_mmc2
  run bootcmd_usb
  run bootcmd_dhcp
  ...

Refer to doc/README.distro for details.

While at it, remove the CONFIG_DRIVE_TYPES define which has not
been used and was meant to be used for multi device boot support
which is now provided by distroboot.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
Acked-by: Max Krummenacher <max.krummenacher at toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

---

Changes in v2: None

 include/configs/apalis_imx6.h | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 382048d2ef..5f865e1f08 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -109,20 +109,19 @@
 
 #define CONFIG_LOADADDR			0x12000000
 
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_DRIVE_SATA "sata "
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#undef BOOTENV_RUN_NET_USB_START
+#define BOOTENV_RUN_NET_USB_START ""
 #else
-#define CONFIG_DRIVE_SATA
+#define BOOTENV
 #endif
 
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_DRIVE_MMC "mmc "
-#else
-#define CONFIG_DRIVE_MMC
-#endif
-
-#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
-
 #define DFU_ALT_EMMC_INFO \
 	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 	"boot part 0 1;" \
@@ -149,7 +148,9 @@
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x11000000\0" \
-	"ramdisk_addr_r=0x12100000\0"
+	"pxefile_addr_r=0x17100000\0" \
+	"ramdisk_addr_r=0x12100000\0" \
+	"scriptaddr=0x17000000\0"
 
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
@@ -191,9 +192,10 @@
 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 #endif
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	BOOTENV \
 	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
-		"run nfsboot ; echo ; echo nfsboot failed ; " \
-		"usb start ;" \
+		"run distro_bootcmd ; " \
+		"usb start ; " \
 		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 	"boot_file=uImage\0" \
 	"console=ttymxc0\0" \
-- 
2.20.1