[U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC

[Tom Rini]

On Tue, Feb 12, 2019 at 03:44:05PM -0600, Adam Ford wrote:
> On Tue, Feb 12, 2019 at 3:41 PM Scott Wood <oss at buserror.net> wrote:
> >
> > On Sun, 2019-02-10 at 07:48 -0600, Adam Ford wrote:
> > > On Sun, Feb 10, 2019 at 7:30 AM Adam Ford <aford173 at gmail.com> wrote:
> > > >
> > > > On Mon, Feb 4, 2019 at 12:17 PM Tim Harvey <tharvey at gateworks.com> wrote:
> > > > >
> > > > > On Wed, Jan 2, 2019 at 6:37 PM Adam Ford <aford173 at gmail.com> wrote:
> > > > > >
> > > > > > The LogicPD board uses a Micron Flash with ECC.  To boot this from
> > > > > > SPL, the ECC needs to be correctly configured or the BCH engine
> > > > > > times out.
> > > > > >
> > > > > > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > > > > >
> > > > > > diff --git a/drivers/mtd/nand/raw/mxs_nand.c
> > > > > > b/drivers/mtd/nand/raw/mxs_nand.c
> > > > > > index e3341812a2..2d84bfffe2 100644
> > > > > > --- a/drivers/mtd/nand/raw/mxs_nand.c
> > > > > > +++ b/drivers/mtd/nand/raw/mxs_nand.c
> > > > > > @@ -1163,6 +1163,12 @@ int mxs_nand_init_spl(struct nand_chip *nand)
> > > > > >
> > > > > >         nand_info->gpmi_regs = (struct mxs_gpmi_regs *)MXS_GPMI_BASE;
> > > > > >         nand_info->bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE;
> > > > > > +
> > > > > > +       if (is_mx6sx() || is_mx7())
> > > > > > +               nand_info->max_ecc_strength_supported = 62;
> > > > > > +       else
> > > > > > +               nand_info->max_ecc_strength_supported = 40;
> > > > > > +
> > > > > >         err = mxs_nand_alloc_buffers(nand_info);
> > > > > >         if (err)
> > > > > >                 return err;
> > > > > > diff --git a/drivers/mtd/nand/raw/mxs_nand_spl.c
> > > > > > b/drivers/mtd/nand/raw/mxs_nand_spl.c
> > > > > > index c628f3adec..ba85baac60 100644
> > > > > > --- a/drivers/mtd/nand/raw/mxs_nand_spl.c
> > > > > > +++ b/drivers/mtd/nand/raw/mxs_nand_spl.c
> > > > > > @@ -201,6 +201,7 @@ static int mxs_nand_init(void)
> > > > > >         /* setup flash layout (does not scan as we override that) */
> > > > > >         mtd->size = nand_chip.chipsize;
> > > > > >         nand_chip.scan_bbt(mtd);
> > > > > > +       mxs_nand_setup_ecc(mtd);
> > > > > >
> > > > > >         return 0;
> > > > > >  }
> > > > > > --
> > > > > > 2.17.1
> > > > > >
> > > > >
> > > > > Thanks Adam,
> > >
> > >  Scott / Stefano,
> > >
> > > I had to use Scott's other -email.
> > >
> > >
> > >  Any chance this can get reviewed and/or applied for the next release?
> > >  We've got a few people who have their respective tested-by comments.
> >
> > I haven't been involved in U-Boot for a while now.
> 
> Tom / Stefano,
> 
> Patchwork is showing this is being delegated to Scott, but he's saying
> he isn't the right person.  Is there someone else who can review
> and/or apply a few of these patches designated to Scott?  Both of the
> patches I care about deligated to him are imx6 related

I've assigned the mxs related patches to Stefano, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190212/902fe63b/attachment.sig>