[U-Boot] [PATCH 1/4] arm: sync armada-xp dts files from Linux 5.0
Chris Packham
judge.packham at gmail.com
Fri Feb 15 09:41:34 UTC 2019
Bring in the Armada 370/XP dts/dtsi files from Linux. As U-Boot hasn't
got the new NAND driver the updating binding has not been included.
Signed-off-by: Chris Packham <judge.packham at gmail.com>
---
arch/arm/dts/armada-370-xp.dtsi | 133 ++++++--------
arch/arm/dts/armada-xp-gp.dts | 167 +++++++----------
arch/arm/dts/armada-xp-maxbcm.dts | 24 +--
arch/arm/dts/armada-xp-mv78230.dtsi | 55 ++----
arch/arm/dts/armada-xp-mv78260.dtsi | 58 ++----
arch/arm/dts/armada-xp-mv78460.dtsi | 58 ++----
arch/arm/dts/armada-xp-synology-ds414.dts | 199 ++++++++++----------
arch/arm/dts/armada-xp-theadorable.dts | 69 +++----
arch/arm/dts/armada-xp.dtsi | 214 ++++++++++++----------
9 files changed, 435 insertions(+), 542 deletions(-)
diff --git a/arch/arm/dts/armada-370-xp.dtsi b/arch/arm/dts/armada-370-xp.dtsi
index 0b2a78d39301..e4c35d4e98f4 100644
--- a/arch/arm/dts/armada-370-xp.dtsi
+++ b/arch/arm/dts/armada-370-xp.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada 370 and Armada XP SoC
*
@@ -8,50 +9,10 @@
* Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
* Ben Dooks <ben.dooks at codethink.co.uk>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
* This file contains the definitions that are common to the Armada
* 370 and Armada XP SoC.
*/
-/include/ "skeleton64.dtsi"
-
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
@@ -86,7 +47,7 @@
pcie-mem-aperture = <0xf8000000 0x7e00000>;
pcie-io-aperture = <0xffe00000 0x100000>;
- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -96,7 +57,7 @@
status = "disabled";
};
- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -106,7 +67,7 @@
status = "disabled";
};
- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -116,7 +77,7 @@
status = "disabled";
};
- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -126,7 +87,7 @@
status = "disabled";
};
- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -141,34 +102,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
- u-boot,dm-pre-reloc;
- rtc at 10300 {
+ rtc: rtc at 10300 {
compatible = "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <50>;
};
- spi0: spi at 10600 {
- reg = <0x10600 0x28>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <30>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- spi1: spi at 10680 {
- reg = <0x10680 0x28>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- interrupts = <92>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
i2c0: i2c at 11000 {
compatible = "marvell,mv64xxx-i2c";
#address-cells = <1>;
@@ -235,33 +175,38 @@
msi-controller;
};
- coherency-fabric at 20200 {
+ coherencyfab: coherency-fabric at 20200 {
compatible = "marvell,coherency-fabric";
reg = <0x20200 0xb0>, <0x21010 0x1c>;
};
- timer at 20300 {
+ timer: timer at 20300 {
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
};
- watchdog at 20300 {
+ watchdog: watchdog at 20300 {
reg = <0x20300 0x34>, <0x20704 0x4>;
};
- pmsu at 22000 {
+ cpurst: cpurst at 20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x8>;
+ };
+
+ pmsu: pmsu at 22000 {
compatible = "marvell,armada-370-pmsu";
reg = <0x22000 0x1000>;
};
- usb at 50000 {
+ usb0: usb at 50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
interrupts = <45>;
status = "disabled";
};
- usb at 51000 {
+ usb1: usb at 51000 {
compatible = "marvell,orion-ehci";
reg = <0x51000 0x500>;
interrupts = <46>;
@@ -275,7 +220,7 @@
status = "disabled";
};
- mdio: mdio {
+ mdio: mdio at 72004 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
@@ -290,7 +235,7 @@
status = "disabled";
};
- sata at a0000 {
+ sata: sata at a0000 {
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <55>;
@@ -309,7 +254,7 @@
status = "disabled";
};
- mvsdio at d4000 {
+ sdio: mvsdio at d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
interrupts = <54>;
@@ -321,6 +266,42 @@
status = "disabled";
};
};
+
+ spi0: spi at 10600 {
+ reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+ <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+ <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+ <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+ <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+ <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+ <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+ <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+ <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <30>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ spi1: spi at 10680 {
+ reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+ <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+ <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+ <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+ <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+ <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+ <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+ <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+ <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <92>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
};
clocks {
diff --git a/arch/arm/dts/armada-xp-gp.dts b/arch/arm/dts/armada-xp-gp.dts
index 27799d1254ea..1139e9469a83 100644
--- a/arch/arm/dts/armada-xp-gp.dts
+++ b/arch/arm/dts/armada-xp-gp.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Marvell Armada XP development board
* (DB-MV784MP-GP)
@@ -8,44 +9,6 @@
* Gregory CLEMENT <gregory.clement at free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default
* 0xd0000000). The 0xf1000000 is the default used by the recent,
@@ -68,11 +31,7 @@
stdout-path = "serial0:115200n8";
};
- aliases {
- spi0 = &spi0;
- };
-
- memory {
+ memory at 0 {
device_type = "memory";
/*
* 8 GB of plug-in RAM modules by default.The amount
@@ -98,7 +57,10 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
- MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@@ -128,31 +90,9 @@
};
};
- pcie-controller {
- status = "okay";
-
- /*
- * The 3 slots are physically present as
- * standard PCIe slots on the board.
- */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie at 9,0 {
- /* Port 2, Lane 0 */
- status = "okay";
- };
- pcie at 10,0 {
- /* Port 3, Lane 0 */
- status = "okay";
- };
- };
-
internal-regs {
serial at 12000 {
status = "okay";
- u-boot,dm-pre-reloc;
};
serial at 12100 {
status = "okay";
@@ -177,43 +117,33 @@
status = "okay";
};
- mdio {
- phy0: ethernet-phy at 0 {
- reg = <16>;
- };
-
- phy1: ethernet-phy at 1 {
- reg = <17>;
- };
-
- phy2: ethernet-phy at 2 {
- reg = <18>;
- };
-
- phy3: ethernet-phy at 3 {
- reg = <19>;
- };
- };
-
ethernet at 70000 {
status = "okay";
phy = <&phy0>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
};
ethernet at 74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
};
ethernet at 30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
};
ethernet at 34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
};
/* Front-side USB slot */
@@ -226,27 +156,72 @@
status = "okay";
};
- spi0: spi at 10600 {
+ bm at c0000 {
status = "okay";
- u-boot,dm-pre-reloc;
-
- spi-flash at 0 {
- u-boot,dm-pre-reloc;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q128a13", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
- };
};
nand at d0000 {
status = "okay";
+ label = "pxa3xx_nand-0";
num-cs = <1>;
marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
nand-on-flash-bbt;
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
+ };
+};
+
+&pciec {
+ status = "okay";
+
+ /*
+ * The 3 slots are physically present as
+ * standard PCIe slots on the board.
+ */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie at 9,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ pcie at a,0 {
+ /* Port 3, Lane 0 */
+ status = "okay";
+ };
+};
+
+&mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <16>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <17>;
+ };
+
+ phy2: ethernet-phy at 2 {
+ reg = <18>;
+ };
+
+ phy3: ethernet-phy at 3 {
+ reg = <19>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
};
};
diff --git a/arch/arm/dts/armada-xp-maxbcm.dts b/arch/arm/dts/armada-xp-maxbcm.dts
index d7d7f65c85fe..921eb7086254 100644
--- a/arch/arm/dts/armada-xp-maxbcm.dts
+++ b/arch/arm/dts/armada-xp-maxbcm.dts
@@ -225,18 +225,6 @@
status = "okay";
};
- spi0: spi at 10600 {
- status = "okay";
-
- spi-flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q128a13", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
- };
- };
-
nand at d0000 {
status = "okay";
num-cs = <1>;
@@ -247,3 +235,15 @@
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+};
diff --git a/arch/arm/dts/armada-xp-mv78230.dtsi b/arch/arm/dts/armada-xp-mv78230.dtsi
index f6bab9fb20a9..8558bf6bb54c 100644
--- a/arch/arm/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/dts/armada-xp-mv78230.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada XP family SoC
*
@@ -5,44 +6,6 @@
*
* Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
* Contains definitions specific to the Armada XP MV78230 SoC that are not
* common to all Armada XP SoCs.
*/
@@ -207,25 +170,33 @@
internal-regs {
gpio0: gpio at 18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio at 18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <17>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>;
+ clocks = <&coreclk 0>;
};
};
};
diff --git a/arch/arm/dts/armada-xp-mv78260.dtsi b/arch/arm/dts/armada-xp-mv78260.dtsi
index d39231f69d9a..2d85fe8ac327 100644
--- a/arch/arm/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/dts/armada-xp-mv78260.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada XP family SoC
*
@@ -5,44 +6,6 @@
*
* Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
* Contains definitions specific to the Armada XP MV78260 SoC that are not
* common to all Armada XP SoCs.
*/
@@ -294,29 +257,38 @@
internal-regs {
gpio0: gpio at 18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio at 18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio at 18180 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
diff --git a/arch/arm/dts/armada-xp-mv78460.dtsi b/arch/arm/dts/armada-xp-mv78460.dtsi
index c642565d1bc6..230a3fd36b30 100644
--- a/arch/arm/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/dts/armada-xp-mv78460.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada XP family SoC
*
@@ -5,44 +6,6 @@
*
* Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
* Contains definitions specific to the Armada XP MV78460 SoC that are not
* common to all Armada XP SoCs.
*/
@@ -333,29 +296,38 @@
internal-regs {
gpio0: gpio at 18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio at 18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio at 18180 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armada-370-gpio",
+ "marvell,orion-gpio";
reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
diff --git a/arch/arm/dts/armada-xp-synology-ds414.dts b/arch/arm/dts/armada-xp-synology-ds414.dts
index 0a60ddfa4149..861967cd7e87 100644
--- a/arch/arm/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/dts/armada-xp-synology-ds414.dts
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Synology DS414
*
* Copyright (C) 2014, Arnaud EBALARD <arno at natisbad.org>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the old 0xd0000000).
* The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
@@ -42,36 +38,16 @@
spi0 = &spi0;
};
- memory {
+ memory at 0 {
device_type = "memory";
reg = <0 0x00000000 0 0x40000000>; /* 1GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
- pcie-controller {
- status = "okay";
-
- /*
- * Connected to Marvell 88SX7042 SATA-II controller
- * handling the four disks.
- */
- pcie at 1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /*
- * Connected to EtronTech EJ168A XHCI controller
- * providing the two rear USB 3.0 ports.
- */
- pcie at 5,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
internal-regs {
@@ -80,64 +56,6 @@
status = "disabled";
};
- spi0: spi at 10600 {
- status = "okay";
- u-boot,dm-pre-reloc;
-
- spi-flash at 0 {
- u-boot,dm-pre-reloc;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q064";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <20000000>;
-
- /*
- * Warning!
- *
- * Synology u-boot uses its compiled-in environment
- * and it seems Synology did not care to change u-boot
- * default configuration in order to allow saving a
- * modified environment at a sensible location. So,
- * if you do a 'saveenv' under u-boot, your modified
- * environment will be saved at 1MB after the start
- * of the flash, i.e. in the middle of the uImage.
- * For that reason, it is strongly advised not to
- * change the default environment, unless you know
- * what you are doing.
- */
- partition at 00000000 { /* u-boot */
- label = "RedBoot";
- reg = <0x00000000 0x000d0000>; /* 832KB */
- };
-
- partition at 000c0000 { /* uImage */
- label = "zImage";
- reg = <0x000d0000 0x002d0000>; /* 2880KB */
- };
-
- partition at 003a0000 { /* uInitramfs */
- label = "rd.gz";
- reg = <0x003a0000 0x00430000>; /* 4250KB */
- };
-
- partition at 007d0000 { /* MAC address and serial number */
- label = "vendor";
- reg = <0x007d0000 0x00010000>; /* 64KB */
- };
-
- partition at 007e0000 {
- label = "RedBoot config";
- reg = <0x007e0000 0x00010000>; /* 64KB */
- };
-
- partition at 007f0000 {
- label = "FIS directory";
- reg = <0x007f0000 0x00010000>; /* 64KB */
- };
- };
- };
-
i2c at 11000 {
clock-frequency = <400000>;
status = "okay";
@@ -179,16 +97,6 @@
status = "okay";
};
- mdio {
- phy0: ethernet-phy at 0 { /* Marvell 88E1512 */
- reg = <0>;
- };
-
- phy1: ethernet-phy at 1 { /* Marvell 88E1512 */
- reg = <1>;
- };
- };
-
ethernet at 70000 {
status = "okay";
pinctrl-0 = <&ge0_rgmii_pins>;
@@ -215,7 +123,7 @@
&sata3_pwr_pin &sata4_pwr_pin>;
pinctrl-names = "default";
- sata1_regulator: sata1-regulator {
+ sata1_regulator: sata1-regulator at 1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA1 Power";
@@ -228,7 +136,7 @@
gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
- sata2_regulator: sata2-regulator {
+ sata2_regulator: sata2-regulator at 2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA2 Power";
@@ -241,7 +149,7 @@
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
- sata3_regulator: sata3-regulator {
+ sata3_regulator: sata3-regulator at 3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "SATA3 Power";
@@ -254,7 +162,7 @@
gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
- sata4_regulator: sata4-regulator {
+ sata4_regulator: sata4-regulator at 4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "SATA4 Power";
@@ -269,6 +177,39 @@
};
};
+&pciec {
+ status = "okay";
+
+ /*
+ * Connected to Marvell 88SX7042 SATA-II controller
+ * handling the four disks.
+ */
+ pcie at 1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /*
+ * Connected to EtronTech EJ168A XHCI controller
+ * providing the two rear USB 3.0 ports.
+ */
+ pcie at 5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+};
+
+
+&mdio {
+ phy0: ethernet-phy at 0 { /* Marvell 88E1512 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+};
+
&pinctrl {
sata1_pwr_pin: sata1-pwr-pin {
marvell,pins = "mpp42";
@@ -335,3 +276,59 @@
marvell,function = "gpio";
};
};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q064", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+
+ /*
+ * Warning!
+ *
+ * Synology u-boot uses its compiled-in environment
+ * and it seems Synology did not care to change u-boot
+ * default configuration in order to allow saving a
+ * modified environment at a sensible location. So,
+ * if you do a 'saveenv' under u-boot, your modified
+ * environment will be saved at 1MB after the start
+ * of the flash, i.e. in the middle of the uImage.
+ * For that reason, it is strongly advised not to
+ * change the default environment, unless you know
+ * what you are doing.
+ */
+ partition at 0 { /* u-boot */
+ label = "RedBoot";
+ reg = <0x00000000 0x000d0000>; /* 832KB */
+ };
+
+ partition at c0000 { /* uImage */
+ label = "zImage";
+ reg = <0x000d0000 0x002d0000>; /* 2880KB */
+ };
+
+ partition at 3a0000 { /* uInitramfs */
+ label = "rd.gz";
+ reg = <0x003a0000 0x00430000>; /* 4250KB */
+ };
+
+ partition at 7d0000 { /* MAC address and serial number */
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ };
+
+ partition at 7e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>; /* 64KB */
+ };
+
+ partition at 7f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>; /* 64KB */
+ };
+ };
+};
diff --git a/arch/arm/dts/armada-xp-theadorable.dts b/arch/arm/dts/armada-xp-theadorable.dts
index 5695e9b75856..bcb4bfdd5c19 100644
--- a/arch/arm/dts/armada-xp-theadorable.dts
+++ b/arch/arm/dts/armada-xp-theadorable.dts
@@ -126,40 +126,6 @@
status = "okay";
};
- spi0: spi at 10600 {
- status = "okay";
- u-boot,dm-pre-reloc;
-
- spi-flash at 0 {
- u-boot,dm-pre-reloc;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "n25q128a13", "jedec,spi-nor", "spi-flash";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <27777777>;
- };
-
- fpga at 1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spi-generic-device";
- reg = <1>; /* Chip select 1 */
- spi-max-frequency = <27777777>;
- };
- };
-
- spi1: spi at 10680 {
- status = "okay";
-
- fpga at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spi-generic-device";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <27777777>;
- };
- };
-
/* The LCD controller is only used on this board */
lcd0: lcd-controller at e0000 {
compatible = "marvell,armada-xp-lcd";
@@ -188,6 +154,41 @@
};
};
+&spi0 {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ spi-flash at 0 {
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13", "jedec,spi-nor", "spi-flash";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <27777777>;
+ };
+
+ fpga at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-generic-device";
+ reg = <1>; /* Chip select 1 */
+ spi-max-frequency = <27777777>;
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ fpga at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-generic-device";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <27777777>;
+ };
+};
+
+
&pciec {
status = "okay";
diff --git a/arch/arm/dts/armada-xp.dtsi b/arch/arm/dts/armada-xp.dtsi
index 3fac39e41d78..d856d9602272 100644
--- a/arch/arm/dts/armada-xp.dtsi
+++ b/arch/arm/dts/armada-xp.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree Include file for Marvell Armada XP family SoC
*
@@ -8,44 +9,6 @@
* Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
* Ben Dooks <ben.dooks at codethink.co.uk>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
* Contains definitions specific to the Armada XP SoC that are not
* common to all Armada SoCs.
*/
@@ -53,6 +16,9 @@
#include "armada-370-xp.dtsi"
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
model = "Marvell Armada XP family SoC";
compatible = "marvell,armadaxp", "marvell,armada-370-xp";
@@ -71,12 +37,12 @@
};
internal-regs {
- sdramc at 1400 {
+ sdramc: sdramc at 1400 {
compatible = "marvell,armada-xp-sdram-controller";
reg = <0x1400 0x500>;
};
- L2: l2-cache {
+ L2: l2-cache at 8000 {
compatible = "marvell,aurora-system-cache";
reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
@@ -85,29 +51,6 @@
wt-override;
};
- spi0: spi at 10600 {
- compatible = "marvell,armada-xp-spi",
- "marvell,orion-spi";
- pinctrl-0 = <&spi0_pins>;
- pinctrl-names = "default";
- };
-
- spi1: spi at 10680 {
- compatible = "marvell,armada-xp-spi",
- "marvell,orion-spi";
- };
-
-
- i2c0: i2c at 11000 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- i2c1: i2c at 11100 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
uart2: serial at 12200 {
compatible = "snps,dw-apb-uart";
pinctrl-0 = <&uart2_pins>;
@@ -132,7 +75,7 @@
status = "disabled";
};
- system-controller at 18200 {
+ systemc: system-controller at 18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x500>;
};
@@ -150,7 +93,7 @@
#clock-cells = <1>;
};
- thermal at 182b0 {
+ thermal: thermal at 182b0 {
compatible = "marvell,armadaxp-thermal";
reg = <0x182b0 0x4
0x184d0 0x4>;
@@ -164,25 +107,9 @@
clocks = <&coreclk 1>;
};
- interrupt-controller at 20a00 {
- reg = <0x20a00 0x2d0>, <0x21070 0x58>;
- };
-
- timer at 20300 {
- compatible = "marvell,armada-xp-timer";
- clocks = <&coreclk 2>, <&refclk>;
- clock-names = "nbclk", "fixed";
- };
-
- watchdog at 20300 {
- compatible = "marvell,armada-xp-wdt";
- clocks = <&coreclk 2>, <&refclk>;
- clock-names = "nbclk", "fixed";
- };
-
- cpurst at 20800 {
- compatible = "marvell,armada-370-cpu-reset";
- reg = <0x20800 0x20>;
+ cpu-config at 21000 {
+ compatible = "marvell,armada-xp-cpu-config";
+ reg = <0x21000 0x8>;
};
eth2: ethernet at 30000 {
@@ -193,15 +120,7 @@
status = "disabled";
};
- usb at 50000 {
- clocks = <&gateclk 18>;
- };
-
- usb at 51000 {
- clocks = <&gateclk 19>;
- };
-
- usb at 52000 {
+ usb2: usb at 52000 {
compatible = "marvell,orion-ehci";
reg = <0x52000 0x500>;
interrupts = <47>;
@@ -209,7 +128,7 @@
status = "disabled";
};
- xor at 60900 {
+ xor1: xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -237,7 +156,27 @@
compatible = "marvell,armada-xp-neta";
};
- xor at f0900 {
+ cesa: crypto at 90000 {
+ compatible = "marvell,armada-xp-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <48>, <49>;
+ clocks = <&gateclk 23>, <&gateclk 23>;
+ clock-names = "cesa0", "cesa1";
+ marvell,crypto-srams = <&crypto_sram0>,
+ <&crypto_sram1>;
+ marvell,crypto-sram-size = <0x800>;
+ };
+
+ bm: bm at c0000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc0000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ status = "disabled";
+ };
+
+ xor0: xor at f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
0xF0B00 0x100>;
@@ -257,6 +196,35 @@
};
};
};
+
+ crypto_sram0: sa-sram0 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+ };
+
+ crypto_sram1: sa-sram1 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+ };
+
+ bm_bppi: bm-bppi {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gateclk 13>;
+ no-memory-wc;
+ status = "disabled";
+ };
};
clocks {
@@ -269,6 +237,44 @@
};
};
+&i2c0 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x100>;
+};
+
+&mpic {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+ compatible = "marvell,armada-xp-timer";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+ compatible = "marvell,armada-xp-wdt";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+ reg = <0x20800 0x20>;
+};
+
+&usb0 {
+ clocks = <&gateclk 18>;
+};
+
+&usb1 {
+ clocks = <&gateclk 19>;
+};
+
&pinctrl {
ge0_gmii_pins: ge0-gmii-pins {
marvell,pins =
@@ -309,6 +315,12 @@
marvell,function = "spi0";
};
+ spi1_pins: spi1-pins {
+ marvell,pins = "mpp13", "mpp14",
+ "mpp16", "mpp17";
+ marvell,function = "spi1";
+ };
+
uart2_pins: uart2-pins {
marvell,pins = "mpp42", "mpp43";
marvell,function = "uart2";
@@ -319,3 +331,15 @@
marvell,function = "uart3";
};
};
+
+&spi0 {
+ compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+};
+
+&spi1 {
+ compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+};
--
2.20.1
More information about the U-Boot
mailing list