[U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]

Abel Vesa abel.vesa at nxp.com
Fri Feb 1 16:40:16 UTC 2019


Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] to the ones
from kernel v4.20 (commit 8fe28cb58bcb2).

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
Acked-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/dts/Makefile               |   8 +-
 arch/arm/dts/imx6dl-sabreauto.dts   |  13 +
 arch/arm/dts/imx6dl-sabresd.dts     |  18 +
 arch/arm/dts/imx6dl.dtsi            | 306 ++++++++++++--
 arch/arm/dts/imx6q-sabreauto.dts    |  18 +
 arch/arm/dts/imx6q-sabresd.dts      |  23 +
 arch/arm/dts/imx6q.dtsi             | 310 ++++++++++++--
 arch/arm/dts/imx6qdl-sabreauto.dtsi | 810 ++++++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl-sabresd.dtsi   | 741 +++++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qdl.dtsi           | 455 +++++++++++---------
 arch/arm/dts/imx6qp-sabreauto.dts   |  55 +++
 arch/arm/dts/imx6qp-sabresd.dts     |  55 +++
 arch/arm/dts/imx6qp.dtsi            | 115 +++++
 13 files changed, 2669 insertions(+), 258 deletions(-)
 create mode 100644 arch/arm/dts/imx6dl-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6dl-sabresd.dts
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6q-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi
 create mode 100644 arch/arm/dts/imx6qp-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
 create mode 100644 arch/arm/dts/imx6qp.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 46f1d69..e8512af 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -443,7 +443,13 @@ dtb-$(CONFIG_MX6QDL) += \
 	imx6q-icore.dtb \
 	imx6q-icore-mipi.dtb \
 	imx6q-icore-rqs.dtb \
-	imx6q-logicpd.dtb
+	imx6q-logicpd.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabresd.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabresd.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb
 
 dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
 
diff --git a/arch/arm/dts/imx6dl-sabreauto.dts b/arch/arm/dts/imx6dl-sabreauto.dts
new file mode 100644
index 0000000..660d52a
--- /dev/null
+++ b/arch/arm/dts/imx6dl-sabreauto.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
+	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6dl-sabresd.dts b/arch/arm/dts/imx6dl-sabresd.dts
new file mode 100644
index 0000000..cd6bbf2
--- /dev/null
+++ b/arch/arm/dts/imx6dl-sabresd.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
+	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/dts/imx6dl.dtsi b/arch/arm/dts/imx6dl.dtsi
index 9a4c22c..f0607eb 100644
--- a/arch/arm/dts/imx6dl.dtsi
+++ b/arch/arm/dts/imx6dl.dtsi
@@ -1,12 +1,6 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx6dl-pinfunc.h"
@@ -39,6 +33,7 @@
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
@@ -56,39 +51,57 @@
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
 	soc {
-		ocram: sram at 00900000 {
+		ocram: sram at 900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips1: aips-bus at 02000000 {
-			iomuxc: iomuxc at 020e0000 {
+		aips1: aips-bus at 2000000 {
+			iomuxc: iomuxc at 20e0000 {
 				compatible = "fsl,imx6dl-iomuxc";
 			};
 
-			pxp: pxp at 020f0000 {
+			pxp: pxp at 20f0000 {
 				reg = <0x020f0000 0x4000>;
 				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			epdc: epdc at 020f4000 {
+			epdc: epdc at 20f4000 {
 				reg = <0x020f4000 0x4000>;
 				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 			};
-
-			lcdif: lcdif at 020f8000 {
-				reg = <0x020f8000 0x4000>;
-				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-			};
 		};
 
-		aips2: aips-bus at 02100000 {
-			i2c4: i2c at 021f8000 {
+		aips2: aips-bus at 2100000 {
+			i2c4: i2c at 21f8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -100,14 +113,177 @@
 		};
 	};
 
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>;
+	};
+
 	display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>;
 	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
+};
 
-	gpu-subsystem {
-		compatible = "fsl,imx-gpu-subsystem";
-		cores = <&gpu_2d>, <&gpu_3d>;
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 3 {
+			reg = <3>;
+
+			ipu1_csi0_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 4 {
+			reg = <4>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port at 5 {
+			reg = <5>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu1_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			ipu1_csi1_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			ipu1_csi1_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port at 2 {
+			reg = <2>;
+
+			ipu1_csi1_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port at 3 {
+			reg = <3>;
+
+			ipu1_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port at 4 {
+			reg = <4>;
+
+			ipu1_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port at 5 {
+			reg = <5>;
+
+			ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+				remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+			};
+		};
 	};
 };
 
@@ -119,6 +295,12 @@
 	compatible = "fsl,imx6dl-hdmi";
 };
 
+&ipu1_csi1 {
+	ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+		remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+	};
+};
+
 &ldb {
 	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
 		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
@@ -128,6 +310,82 @@
 		      "di0", "di1";
 };
 
+&mipi_csi {
+	port at 1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+
+		mipi_vc0_to_ipu1_csi1_mux: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+		};
+	};
+
+	port at 2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc1_to_ipu1_csi0_mux: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+		};
+
+		mipi_vc1_to_ipu1_csi1_mux: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+		};
+	};
+
+	port at 3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc2_to_ipu1_csi0_mux: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+		};
+
+		mipi_vc2_to_ipu1_csi1_mux: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+		};
+	};
+
+	port at 4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc3_to_ipu1_csi0_mux: endpoint at 0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+		};
+
+		mipi_vc3_to_ipu1_csi1_mux: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */
+			<0x34 0x00000038>, /* IPU_CSI1_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
 &vpu {
 	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
 };
diff --git a/arch/arm/dts/imx6q-sabreauto.dts b/arch/arm/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..6e981a3
--- /dev/null
+++ b/arch/arm/dts/imx6q-sabreauto.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx6q-sabresd.dts b/arch/arm/dts/imx6q-sabresd.dts
new file mode 100644
index 0000000..eec9446
--- /dev/null
+++ b/arch/arm/dts/imx6q-sabresd.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
+	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/dts/imx6q.dtsi b/arch/arm/dts/imx6q.dtsi
index c30c836..8381d24 100644
--- a/arch/arm/dts/imx6q.dtsi
+++ b/arch/arm/dts/imx6q.dtsi
@@ -1,12 +1,6 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx6q-pinfunc.h"
@@ -44,6 +38,7 @@
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
@@ -56,38 +51,119 @@
 			soc-supply = <&reg_soc>;
 		};
 
-		cpu at 1 {
+		cpu1: cpu at 1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu at 2 {
+		cpu2: cpu at 2 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu at 3 {
+		cpu3: cpu at 3 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
 	soc {
-		ocram: sram at 00900000 {
+		ocram: sram at 900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips-bus at 02000000 { /* AIPS1 */
-			spba-bus at 02000000 {
-				ecspi5: ecspi at 02018000 {
+		aips-bus at 2000000 { /* AIPS1 */
+			spba-bus at 2000000 {
+				ecspi5: spi at 2018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -96,18 +172,18 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
 
-			iomuxc: iomuxc at 020e0000 {
+			iomuxc: iomuxc at 20e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 			};
 		};
 
-		sata: sata at 02200000 {
+		sata: sata at 2200000 {
 			compatible = "fsl,imx6q-ahci";
 			reg = <0x02200000 0x4000>;
 			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -118,17 +194,17 @@
 			status = "disabled";
 		};
 
-		gpu_vg: gpu at 02204000 {
+		gpu_vg: gpu at 2204000 {
 			compatible = "vivante,gc";
 			reg = <0x02204000 0x4000>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
 				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
 			clock-names = "bus", "core";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
-		ipu2: ipu at 02800000 {
+		ipu2: ipu at 2800000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,imx6q-ipu";
@@ -143,10 +219,18 @@
 
 			ipu2_csi0: port at 0 {
 				reg = <0>;
+
+				ipu2_csi0_from_mipi_vc2: endpoint {
+					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+				};
 			};
 
 			ipu2_csi1: port at 1 {
 				reg = <1>;
+
+				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+				};
 			};
 
 			ipu2_di0: port at 2 {
@@ -154,22 +238,27 @@
 				#size-cells = <0>;
 				reg = <2>;
 
-				ipu2_di0_disp0: disp0-endpoint {
+				ipu2_di0_disp0: endpoint at 0 {
+					reg = <0>;
 				};
 
-				ipu2_di0_hdmi: hdmi-endpoint {
+				ipu2_di0_hdmi: endpoint at 1 {
+					reg = <1>;
 					remote-endpoint = <&hdmi_mux_2>;
 				};
 
-				ipu2_di0_mipi: mipi-endpoint {
+				ipu2_di0_mipi: endpoint at 2 {
+					reg = <2>;
 					remote-endpoint = <&mipi_mux_2>;
 				};
 
-				ipu2_di0_lvds0: lvds0-endpoint {
+				ipu2_di0_lvds0: endpoint at 3 {
+					reg = <3>;
 					remote-endpoint = <&lvds0_mux_2>;
 				};
 
-				ipu2_di0_lvds1: lvds1-endpoint {
+				ipu2_di0_lvds1: endpoint at 4 {
+					reg = <4>;
 					remote-endpoint = <&lvds1_mux_2>;
 				};
 			};
@@ -179,33 +268,136 @@
 				#size-cells = <0>;
 				reg = <3>;
 
-				ipu2_di1_hdmi: hdmi-endpoint {
+				ipu2_di1_hdmi: endpoint at 1 {
+					reg = <1>;
 					remote-endpoint = <&hdmi_mux_3>;
 				};
 
-				ipu2_di1_mipi: mipi-endpoint {
+				ipu2_di1_mipi: endpoint at 2 {
+					reg = <2>;
 					remote-endpoint = <&mipi_mux_3>;
 				};
 
-				ipu2_di1_lvds0: lvds0-endpoint {
+				ipu2_di1_lvds0: endpoint at 3 {
+					reg = <3>;
 					remote-endpoint = <&lvds0_mux_3>;
 				};
 
-				ipu2_di1_lvds1: lvds1-endpoint {
+				ipu2_di1_lvds1: endpoint at 4 {
+					reg = <4>;
 					remote-endpoint = <&lvds1_mux_3>;
 				};
 			};
 		};
 	};
 
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
+	};
+
 	display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
 	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
 
-	gpu-subsystem {
-		compatible = "fsl,imx-gpu-subsystem";
-		cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
+		port at 2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu2_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+
+			ipu2_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			ipu2_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port at 2 {
+			reg = <2>;
+
+			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+			};
+		};
 	};
 };
 
@@ -229,6 +421,12 @@
 	};
 };
 
+&ipu1_csi1 {
+	ipu1_csi1_from_mipi_vc1: endpoint {
+		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+	};
+};
+
 &ldb {
 	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
 		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
@@ -275,6 +473,40 @@
 	};
 };
 
+&mipi_csi {
+	port at 1 {
+		reg = <1>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint {
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+	};
+
+	port at 2 {
+		reg = <2>;
+
+		mipi_vc1_to_ipu1_csi1: endpoint {
+			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+		};
+	};
+
+	port at 3 {
+		reg = <3>;
+
+		mipi_vc2_to_ipu2_csi0: endpoint {
+			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+		};
+	};
+
+	port at 4 {
+		reg = <4>;
+
+		mipi_vc3_to_ipu2_csi1_mux: endpoint {
+			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
 &mipi_dsi {
 	ports {
 		port at 2 {
@@ -295,6 +527,16 @@
 	};
 };
 
+&mux {
+	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
+			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
 &vpu {
 	compatible = "fsl,imx6q-vpu", "cnm,coda960";
 };
diff --git a/arch/arm/dts/imx6qdl-sabreauto.dtsi b/arch/arm/dts/imx6qdl-sabreauto.dtsi
new file mode 100644
index 0000000..a6dc5c4
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-sabreauto.dtsi
@@ -0,0 +1,810 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory at 10000000 {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_audio: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "cs42888_supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx-sabreauto-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		mux-gpios = <&gpio5 4 0>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adv7180: camera at 21 {
+				compatible = "adi,adv7180";
+				reg = <0x21>;
+				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+				port {
+					adv7180_to_ipu1_csi0_mux: endpoint {
+						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+						bus-width = <8>;
+					};
+				};
+			};
+
+			max7310_a: gpio at 30 {
+				compatible = "maxim,max7310";
+				reg = <0x30>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			max7310_b: gpio at 32 {
+				compatible = "maxim,max7310";
+				reg = <0x32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			};
+
+			max7310_c: gpio at 34 {
+				compatible = "maxim,max7310";
+				reg = <0x34>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor at 44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer at e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer at 1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	status = "disabled"; /* pin conflict with WEIM NOR */
+
+	flash: m25p80 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100 at 8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: cs42888 at 48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	touchscreen at 4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabreauto {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+
+		pinctrl_egalax_int: egalax-intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
+			>;
+		};
+
+		pinctrl_max7310: max7310grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm3: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_gpt_input_capture0: gptinputcapture0grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpt_input_capture1: gptinputcapture1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_weim_cs0: weimcs0grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+			>;
+		};
+
+		pinctrl_weim_nor: weimnorgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel at 0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "disabled"; /* pin conflict with SPI NOR */
+
+	nor at 0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi
new file mode 100644
index 0000000..2cd5a9f
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory at 10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_usb_h1_vbus: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 29 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_audio: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply";
+			gpio = <&gpio4 10 0>;
+			enable-active-high;
+		};
+
+		reg_pcie: regulator at 3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pcie_reg>;
+			regulator-name = "MPCIE_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 19 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabresd-wm8962",
+			   "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		red {
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port at 0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: wm8962 at 1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0013 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x8014 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	ov5642: camera at 3c {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		reg = <0x3c>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov5640: camera at 3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pmic: pfuze100 at 8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts at 4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 2>;
+		wakeup-gpios = <&gpio6 7 0>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabresd {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+			>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel at 1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port at 4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_arm {
+       vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+       vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index b13b0b2..e4daf15 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -1,21 +1,23 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; };
+
 	aliases {
 		ethernet0 = &fec;
 		can0 = &can1;
@@ -49,9 +51,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ckil {
 			compatible = "fsl,imx-ckil", "fixed-clock";
 			#clock-cells = <0>;
@@ -71,6 +70,75 @@
 		};
 	};
 
+	tempmon: tempmon {
+		compatible = "fsl,imx6q-tempmon";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,tempmon = <&anatop>;
+		fsl,tempmon-data = <&ocotp>;
+		clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	};
+
+	ldb: ldb {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+		gpr = <&gpr>;
+		status = "disabled";
+
+		lvds-channel at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			status = "disabled";
+
+			port at 0 {
+				reg = <0>;
+
+				lvds0_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds0>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+
+				lvds0_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds0>;
+				};
+			};
+		};
+
+		lvds-channel at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			status = "disabled";
+
+			port at 0 {
+				reg = <0>;
+
+				lvds1_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds1>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+
+				lvds1_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds1>;
+				};
+			};
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -78,7 +146,7 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
-		dma_apbh: dma-apbh at 00110000 {
+		dma_apbh: dma-apbh at 110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -91,7 +159,7 @@
 			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
 		};
 
-		gpmi: gpmi-nand at 00112000 {
+		gpmi: gpmi-nand at 112000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -111,7 +179,7 @@
 			status = "disabled";
 		};
 
-		hdmi: hdmi at 0120000 {
+		hdmi: hdmi at 120000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x00120000 0x9000>;
@@ -139,7 +207,7 @@
 			};
 		};
 
-		gpu_3d: gpu at 00130000 {
+		gpu_3d: gpu at 130000 {
 			compatible = "vivante,gc";
 			reg = <0x00130000 0x4000>;
 			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -147,20 +215,20 @@
 				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
 				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
 			clock-names = "bus", "core", "shader";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
-		gpu_2d: gpu at 00134000 {
+		gpu_2d: gpu at 134000 {
 			compatible = "vivante,gc";
 			reg = <0x00134000 0x4000>;
 			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
 				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
 			clock-names = "bus", "core";
-			power-domains = <&gpc 1>;
+			power-domains = <&pd_pu>;
 		};
 
-		timer at 00a00600 {
+		timer at a00600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
@@ -168,7 +236,7 @@
 			clocks = <&clks IMX6QDL_CLK_TWD>;
 		};
 
-		intc: interrupt-controller at 00a01000 {
+		intc: interrupt-controller at a01000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -177,7 +245,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache at 00a02000 {
+		L2: l2-cache at a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -188,7 +256,7 @@
 			arm,shared-override;
 		};
 
-		pcie: pcie at 0x01000000 {
+		pcie: pcie at 1ffc000 {
 			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
 			reg = <0x01ffc000 0x04000>,
 			      <0x01f00000 0x80000>;
@@ -196,6 +264,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			bus-range = <0x00 0xff>;
 			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
@@ -204,9 +273,9 @@
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			                <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
@@ -214,26 +283,21 @@
 			status = "disabled";
 		};
 
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		aips-bus at 02000000 { /* AIPS1 */
+		aips-bus at 2000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x02000000 0x100000>;
 			ranges;
 
-			spba-bus at 02000000 {
+			spba-bus at 2000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				spdif: spdif at 02004000 {
+				spdif: spdif at 2004000 {
 					compatible = "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -253,7 +317,7 @@
 					status = "disabled";
 				};
 
-				ecspi1: ecspi at 02008000 {
+				ecspi1: spi at 2008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -267,7 +331,7 @@
 					status = "disabled";
 				};
 
-				ecspi2: ecspi at 0200c000 {
+				ecspi2: spi at 200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -281,7 +345,7 @@
 					status = "disabled";
 				};
 
-				ecspi3: ecspi at 02010000 {
+				ecspi3: spi at 2010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -295,7 +359,7 @@
 					status = "disabled";
 				};
 
-				ecspi4: ecspi at 02014000 {
+				ecspi4: spi at 2014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -309,7 +373,7 @@
 					status = "disabled";
 				};
 
-				uart1: serial at 02020000 {
+				uart1: serial at 2020000 {
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -321,7 +385,7 @@
 					status = "disabled";
 				};
 
-				esai: esai at 02024000 {
+				esai: esai at 2024000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
@@ -337,7 +401,7 @@
 					status = "disabled";
 				};
 
-				ssi1: ssi at 02028000 {
+				ssi1: ssi at 2028000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
@@ -353,7 +417,7 @@
 					status = "disabled";
 				};
 
-				ssi2: ssi at 0202c000 {
+				ssi2: ssi at 202c000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
@@ -369,7 +433,7 @@
 					status = "disabled";
 				};
 
-				ssi3: ssi at 02030000 {
+				ssi3: ssi at 2030000 {
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
@@ -385,7 +449,7 @@
 					status = "disabled";
 				};
 
-				asrc: asrc at 02034000 {
+				asrc: asrc at 2034000 {
 					compatible = "fsl,imx53-asrc";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,12 +474,12 @@
 					status = "okay";
 				};
 
-				spba at 0203c000 {
+				spba at 203c000 {
 					reg = <0x0203c000 0x4000>;
 				};
 			};
 
-			vpu: vpu at 02040000 {
+			vpu: vpu at 2040000 {
 				compatible = "cnm,coda960";
 				reg = <0x02040000 0x3c000>;
 				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -424,16 +488,16 @@
 				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
 					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
 				clock-names = "per", "ahb";
-				power-domains = <&gpc 1>;
+				power-domains = <&pd_pu>;
 				resets = <&src 1>;
 				iram = <&ocram>;
 			};
 
-			aipstz at 0207c000 { /* AIPSTZ1 */
+			aipstz at 207c000 { /* AIPSTZ1 */
 				reg = <0x0207c000 0x4000>;
 			};
 
-			pwm1: pwm at 02080000 {
+			pwm1: pwm at 2080000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
@@ -444,7 +508,7 @@
 				status = "disabled";
 			};
 
-			pwm2: pwm at 02084000 {
+			pwm2: pwm at 2084000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
@@ -455,7 +519,7 @@
 				status = "disabled";
 			};
 
-			pwm3: pwm at 02088000 {
+			pwm3: pwm at 2088000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
@@ -466,7 +530,7 @@
 				status = "disabled";
 			};
 
-			pwm4: pwm at 0208c000 {
+			pwm4: pwm at 208c000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
@@ -477,7 +541,7 @@
 				status = "disabled";
 			};
 
-			can1: flexcan at 02090000 {
+			can1: flexcan at 2090000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -487,7 +551,7 @@
 				status = "disabled";
 			};
 
-			can2: flexcan at 02094000 {
+			can2: flexcan at 2094000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -497,7 +561,7 @@
 				status = "disabled";
 			};
 
-			gpt: gpt at 02098000 {
+			gpt: gpt at 2098000 {
 				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -507,7 +571,7 @@
 				clock-names = "ipg", "per", "osc_per";
 			};
 
-			gpio1: gpio at 0209c000 {
+			gpio1: gpio at 209c000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x0209c000 0x4000>;
 				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
@@ -518,7 +582,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio2: gpio at 020a0000 {
+			gpio2: gpio at 20a0000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a0000 0x4000>;
 				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
@@ -529,7 +593,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio3: gpio at 020a4000 {
+			gpio3: gpio at 20a4000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a4000 0x4000>;
 				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
@@ -540,7 +604,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio4: gpio at 020a8000 {
+			gpio4: gpio at 20a8000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a8000 0x4000>;
 				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -551,7 +615,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio5: gpio at 020ac000 {
+			gpio5: gpio at 20ac000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020ac000 0x4000>;
 				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
@@ -562,7 +626,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio6: gpio at 020b0000 {
+			gpio6: gpio at 20b0000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b0000 0x4000>;
 				interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -573,7 +637,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			gpio7: gpio at 020b4000 {
+			gpio7: gpio at 20b4000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b4000 0x4000>;
 				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
@@ -584,7 +648,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			kpp: kpp at 020b8000 {
+			kpp: kpp at 20b8000 {
 				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -592,14 +656,14 @@
 				status = "disabled";
 			};
 
-			wdog1: wdog at 020bc000 {
+			wdog1: wdog at 20bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_DUMMY>;
 			};
 
-			wdog2: wdog at 020c0000 {
+			wdog2: wdog at 20c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -607,7 +671,7 @@
 				status = "disabled";
 			};
 
-			clks: ccm at 020c4000 {
+			clks: ccm at 20c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -615,7 +679,7 @@
 				#clock-cells = <1>;
 			};
 
-			anatop: anatop at 020c8000 {
+			anatop: anatop at 20c8000 {
 				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
@@ -625,8 +689,8 @@
 				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x110>;
 					anatop-vol-bit-shift = <8>;
@@ -634,6 +698,7 @@
 					anatop-min-bit-val = <4>;
 					anatop-min-voltage = <800000>;
 					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-3p0 {
@@ -648,20 +713,22 @@
 					anatop-min-bit-val = <0>;
 					anatop-min-voltage = <2625000>;
 					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
 				};
 
 				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2000000>;
+					regulator-min-microvolt = <2250000>;
 					regulator-max-microvolt = <2750000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x130>;
 					anatop-vol-bit-shift = <8>;
 					anatop-vol-bit-width = <5>;
 					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2000000>;
-					anatop-max-voltage = <2750000>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
 				};
 
 				reg_arm: regulator-vddcore {
@@ -716,15 +783,7 @@
 				};
 			};
 
-			tempmon: tempmon {
-				compatible = "fsl,imx6q-tempmon";
-				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-				fsl,tempmon = <&anatop>;
-				fsl,tempmon-data = <&ocotp>;
-				clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-			};
-
-			usbphy1: usbphy at 020c9000 {
+			usbphy1: usbphy at 20c9000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -732,7 +791,7 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			usbphy2: usbphy at 020ca000 {
+			usbphy2: usbphy at 20ca000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -740,7 +799,7 @@
 				fsl,anatop = <&anatop>;
 			};
 
-			snvs: snvs at 020cc000 {
+			snvs: snvs at 20cc000 {
 				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 				reg = <0x020cc000 0x4000>;
 
@@ -756,22 +815,27 @@
 					compatible = "syscon-poweroff";
 					regmap = <&snvs>;
 					offset = <0x38>;
+					value = <0x60>;
 					mask = <0x60>;
 					status = "disabled";
 				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx6q-snvs-lpgpr";
+				};
 			};
 
-			epit1: epit at 020d0000 { /* EPIT1 */
+			epit1: epit at 20d0000 { /* EPIT1 */
 				reg = <0x020d0000 0x4000>;
 				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			epit2: epit at 020d4000 { /* EPIT2 */
+			epit2: epit at 20d4000 { /* EPIT2 */
 				reg = <0x020d4000 0x4000>;
 				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			src: src at 020d8000 {
+			src: src at 20d8000 {
 				compatible = "fsl,imx6q-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -779,7 +843,7 @@
 				#reset-cells = <1>;
 			};
 
-			gpc: gpc at 020dc000 {
+			gpc: gpc at 20dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
 				interrupt-controller;
@@ -787,91 +851,57 @@
 				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
-				pu-supply = <&reg_pu>;
-				clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
-					 <&clks IMX6QDL_CLK_GPU3D_SHADER>,
-					 <&clks IMX6QDL_CLK_GPU2D_CORE>,
-					 <&clks IMX6QDL_CLK_GPU2D_AXI>,
-					 <&clks IMX6QDL_CLK_OPENVG_AXI>,
-					 <&clks IMX6QDL_CLK_VPU_AXI>;
-				#power-domain-cells = <1>;
-			};
-
-			gpr: iomuxc-gpr at 020e0000 {
-				compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e0000 0x38>;
-			};
-
-			iomuxc: iomuxc at 020e0000 {
-				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
-				reg = <0x020e0000 0x4000>;
-			};
-
-			ldb: ldb at 020e0008 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
-				gpr = <&gpr>;
-				status = "disabled";
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				clock-names = "ipg";
 
-				lvds-channel at 0 {
+				pgc {
 					#address-cells = <1>;
 					#size-cells = <0>;
-					reg = <0>;
-					status = "disabled";
 
-					port at 0 {
+					power-domain at 0 {
 						reg = <0>;
-
-						lvds0_mux_0: endpoint {
-							remote-endpoint = <&ipu1_di0_lvds0>;
-						};
+						#power-domain-cells = <0>;
 					};
-
-					port at 1 {
+					pd_pu: power-domain at 1 {
 						reg = <1>;
-
-						lvds0_mux_1: endpoint {
-							remote-endpoint = <&ipu1_di1_lvds0>;
-						};
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+						         <&clks IMX6QDL_CLK_GPU2D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU2D_AXI>,
+						         <&clks IMX6QDL_CLK_OPENVG_AXI>,
+						         <&clks IMX6QDL_CLK_VPU_AXI>;
 					};
 				};
+			};
 
-				lvds-channel at 1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-					status = "disabled";
-
-					port at 0 {
-						reg = <0>;
-
-						lvds1_mux_0: endpoint {
-							remote-endpoint = <&ipu1_di0_lvds1>;
-						};
-					};
+			gpr: iomuxc-gpr at 20e0000 {
+				compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				reg = <0x20e0000 0x38>;
 
-					port at 1 {
-						reg = <1>;
-
-						lvds1_mux_1: endpoint {
-							remote-endpoint = <&ipu1_di1_lvds1>;
-						};
-					};
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
 				};
 			};
 
-			dcic1: dcic at 020e4000 {
+			iomuxc: iomuxc at 20e0000 {
+				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
+				reg = <0x20e0000 0x4000>;
+			};
+
+			dcic1: dcic at 20e4000 {
 				reg = <0x020e4000 0x4000>;
 				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			dcic2: dcic at 020e8000 {
+			dcic2: dcic at 20e8000 {
 				reg = <0x020e8000 0x4000>;
 				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma at 020ec000 {
+			sdma: sdma at 20ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -883,7 +913,7 @@
 			};
 		};
 
-		aips-bus at 02100000 { /* AIPS2 */
+		aips-bus at 2100000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -892,7 +922,6 @@
 
 			crypto: caam at 2100000 {
 				compatible = "fsl,sec-v4.0";
-				fsl,sec-era = <4>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;
@@ -916,11 +945,11 @@
 				};
 			};
 
-			aipstz at 0217c000 { /* AIPSTZ2 */
+			aipstz at 217c000 { /* AIPSTZ2 */
 				reg = <0x0217c000 0x4000>;
 			};
 
-			usbotg: usb at 02184000 {
+			usbotg: usb at 2184000 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -933,7 +962,7 @@
 				status = "disabled";
 			};
 
-			usbh1: usb at 02184200 {
+			usbh1: usb at 2184200 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -947,7 +976,7 @@
 				status = "disabled";
 			};
 
-			usbh2: usb at 02184400 {
+			usbh2: usb at 2184400 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
@@ -960,7 +989,7 @@
 				status = "disabled";
 			};
 
-			usbh3: usb at 02184600 {
+			usbh3: usb at 2184600 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -973,16 +1002,17 @@
 				status = "disabled";
 			};
 
-			usbmisc: usbmisc at 02184800 {
+			usbmisc: usbmisc at 2184800 {
 				#index-cells = <1>;
 				compatible = "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 			};
 
-			fec: ethernet at 02188000 {
+			fec: ethernet at 2188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
 				interrupts-extended =
 					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
 					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
@@ -993,14 +1023,14 @@
 				status = "disabled";
 			};
 
-			mlb at 0218c000 {
+			mlb at 218c000 {
 				reg = <0x0218c000 0x4000>;
 				interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 117 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			usdhc1: usdhc at 02190000 {
+			usdhc1: usdhc at 2190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -1012,7 +1042,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc at 02194000 {
+			usdhc2: usdhc at 2194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -1024,7 +1054,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc at 02198000 {
+			usdhc3: usdhc at 2198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -1036,7 +1066,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc at 0219c000 {
+			usdhc4: usdhc at 219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1048,7 +1078,7 @@
 				status = "disabled";
 			};
 
-			i2c1: i2c at 021a0000 {
+			i2c1: i2c at 21a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -1058,7 +1088,7 @@
 				status = "disabled";
 			};
 
-			i2c2: i2c at 021a4000 {
+			i2c2: i2c at 21a4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -1068,7 +1098,7 @@
 				status = "disabled";
 			};
 
-			i2c3: i2c at 021a8000 {
+			i2c3: i2c at 21a8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -1078,55 +1108,66 @@
 				status = "disabled";
 			};
 
-			romcp at 021ac000 {
+			romcp at 21ac000 {
 				reg = <0x021ac000 0x4000>;
 			};
 
-			mmdc0: mmdc at 021b0000 { /* MMDC0 */
+			mmdc0: mmdc at 21b0000 { /* MMDC0 */
 				compatible = "fsl,imx6q-mmdc";
 				reg = <0x021b0000 0x4000>;
 			};
 
-			mmdc1: mmdc at 021b4000 { /* MMDC1 */
+			mmdc1: mmdc at 21b4000 { /* MMDC1 */
 				reg = <0x021b4000 0x4000>;
 			};
 
-			weim: weim at 021b8000 {
+			weim: weim at 21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
 				compatible = "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
-			ocotp: ocotp at 021bc000 {
+			ocotp: ocotp at 21bc000 {
 				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6QDL_CLK_IIM>;
 			};
 
-			tzasc at 021d0000 { /* TZASC1 */
+			tzasc at 21d0000 { /* TZASC1 */
 				reg = <0x021d0000 0x4000>;
 				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			tzasc at 021d4000 { /* TZASC2 */
+			tzasc at 21d4000 { /* TZASC2 */
 				reg = <0x021d4000 0x4000>;
 				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			audmux: audmux at 021d8000 {
+			audmux: audmux at 21d8000 {
 				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
 				status = "disabled";
 			};
 
-			mipi_csi: mipi at 021dc000 {
+			mipi_csi: mipi at 21dc000 {
+				compatible = "fsl,imx6-mipi-csi2";
 				reg = <0x021dc000 0x4000>;
-			};
-
-			mipi_dsi: mipi at 021e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interrupts = <0 100 0x04>, <0 101 0x04>;
+				clocks = <&clks IMX6QDL_CLK_HSI_TX>,
+					 <&clks IMX6QDL_CLK_VIDEO_27M>,
+					 <&clks IMX6QDL_CLK_EIM_PODF>;
+				clock-names = "dphy", "ref", "pix";
+				status = "disabled";
+			};
+
+			mipi_dsi: mipi at 21e0000 {
 				reg = <0x021e0000 0x4000>;
 				status = "disabled";
 
@@ -1152,12 +1193,14 @@
 				};
 			};
 
-			vdoa at 021e4000 {
+			vdoa at 21e4000 {
+				compatible = "fsl,imx6q-vdoa";
 				reg = <0x021e4000 0x4000>;
 				interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_VDOA>;
 			};
 
-			uart2: serial at 021e8000 {
+			uart2: serial at 21e8000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
 				interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
@@ -1169,7 +1212,7 @@
 				status = "disabled";
 			};
 
-			uart3: serial at 021ec000 {
+			uart3: serial at 21ec000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
 				interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -1181,7 +1224,7 @@
 				status = "disabled";
 			};
 
-			uart4: serial at 021f0000 {
+			uart4: serial at 21f0000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
 				interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -1193,7 +1236,7 @@
 				status = "disabled";
 			};
 
-			uart5: serial at 021f4000 {
+			uart5: serial at 21f4000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
 				interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
@@ -1206,7 +1249,7 @@
 			};
 		};
 
-		ipu1: ipu at 02400000 {
+		ipu1: ipu at 2400000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,imx6q-ipu";
@@ -1221,6 +1264,10 @@
 
 			ipu1_csi0: port at 0 {
 				reg = <0>;
+
+				ipu1_csi0_from_ipu1_csi0_mux: endpoint {
+					remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
+				};
 			};
 
 			ipu1_csi1: port at 1 {
@@ -1232,22 +1279,27 @@
 				#size-cells = <0>;
 				reg = <2>;
 
-				ipu1_di0_disp0: disp0-endpoint {
+				ipu1_di0_disp0: endpoint at 0 {
+					reg = <0>;
 				};
 
-				ipu1_di0_hdmi: hdmi-endpoint {
+				ipu1_di0_hdmi: endpoint at 1 {
+					reg = <1>;
 					remote-endpoint = <&hdmi_mux_0>;
 				};
 
-				ipu1_di0_mipi: mipi-endpoint {
+				ipu1_di0_mipi: endpoint at 2 {
+					reg = <2>;
 					remote-endpoint = <&mipi_mux_0>;
 				};
 
-				ipu1_di0_lvds0: lvds0-endpoint {
+				ipu1_di0_lvds0: endpoint at 3 {
+					reg = <3>;
 					remote-endpoint = <&lvds0_mux_0>;
 				};
 
-				ipu1_di0_lvds1: lvds1-endpoint {
+				ipu1_di0_lvds1: endpoint at 4 {
+					reg = <4>;
 					remote-endpoint = <&lvds1_mux_0>;
 				};
 			};
@@ -1257,22 +1309,27 @@
 				#size-cells = <0>;
 				reg = <3>;
 
-				ipu1_di1_disp1: disp1-endpoint {
+				ipu1_di1_disp1: endpoint at 0 {
+					reg = <0>;
 				};
 
-				ipu1_di1_hdmi: hdmi-endpoint {
+				ipu1_di1_hdmi: endpoint at 1 {
+					reg = <1>;
 					remote-endpoint = <&hdmi_mux_1>;
 				};
 
-				ipu1_di1_mipi: mipi-endpoint {
+				ipu1_di1_mipi: endpoint at 2 {
+					reg = <2>;
 					remote-endpoint = <&mipi_mux_1>;
 				};
 
-				ipu1_di1_lvds0: lvds0-endpoint {
+				ipu1_di1_lvds0: endpoint at 3 {
+					reg = <3>;
 					remote-endpoint = <&lvds0_mux_1>;
 				};
 
-				ipu1_di1_lvds1: lvds1-endpoint {
+				ipu1_di1_lvds1: endpoint at 4 {
+					reg = <4>;
 					remote-endpoint = <&lvds1_mux_1>;
 				};
 			};
diff --git a/arch/arm/dts/imx6qp-sabreauto.dts b/arch/arm/dts/imx6qp-sabreauto.dts
new file mode 100644
index 0000000..d4caeeb
--- /dev/null
+++ b/arch/arm/dts/imx6qp-sabreauto.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+&i2c2 {
+	max7322: gpio at 68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx6qdl-sabreauto {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm/dts/imx6qp-sabresd.dts b/arch/arm/dts/imx6qp-sabresd.dts
new file mode 100644
index 0000000..f1b9cb1
--- /dev/null
+++ b/arch/arm/dts/imx6qp-sabresd.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+	imx6qdl-sabresd {
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/imx6qp.dtsi b/arch/arm/dts/imx6qp.dtsi
new file mode 100644
index 0000000..5f51f8e
--- /dev/null
+++ b/arch/arm/dts/imx6qp.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+#include "imx6q.dtsi"
+
+/ {
+	soc {
+		ocram2: sram at 940000 {
+			compatible = "mmio-sram";
+			reg = <0x00940000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		ocram3: sram at 960000 {
+			compatible = "mmio-sram";
+			reg = <0x00960000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		aips-bus at 2100000 {
+			pre1: pre at 21c8000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021c8000 0x1000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE0>;
+				clock-names = "axi";
+				fsl,iram = <&ocram2>;
+			};
+
+			pre2: pre at 21c9000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021c9000 0x1000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE1>;
+				clock-names = "axi";
+				fsl,iram = <&ocram2>;
+			};
+
+			pre3: pre at 21ca000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021ca000 0x1000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE2>;
+				clock-names = "axi";
+				fsl,iram = <&ocram3>;
+			};
+
+			pre4: pre at 21cb000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021cb000 0x1000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE3>;
+				clock-names = "axi";
+				fsl,iram = <&ocram3>;
+			};
+
+			prg1: prg at 21cc000 {
+				compatible = "fsl,imx6qp-prg";
+				reg = <0x021cc000 0x1000>;
+				clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
+					 <&clks IMX6QDL_CLK_PRG0_AXI>;
+				clock-names = "ipg", "axi";
+				fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+			};
+
+			prg2: prg at 21cd000 {
+				compatible = "fsl,imx6qp-prg";
+				reg = <0x021cd000 0x1000>;
+				clocks = <&clks IMX6QDL_CLK_PRG1_APB>,
+					 <&clks IMX6QDL_CLK_PRG1_AXI>;
+				clock-names = "ipg", "axi";
+				fsl,pres = <&pre4>, <&pre2>, <&pre3>;
+			};
+		};
+	};
+};
+
+&fec {
+	/delete-property/interrupts-extended;
+	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpc {
+	compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc";
+};
+
+&ipu1 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+	fsl,prg = <&prg1>;
+};
+
+&ipu2 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+	fsl,prg = <&prg2>;
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+		      "di0", "di1";
+};
+
+&mmdc0 {
+	compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
+};
+
+&pcie {
+	compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+};
-- 
2.7.4



More information about the U-Boot mailing list