[U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken

[David Wu]

在 2019/2/13 下午6:13, Philipp Tomsich 写道:
> 
> 
>> On 13.02.2019, at 11:10, David Wu <david.wu at rock-chips.com> wrote:
>>
>> Hi Philipp,
>>
>> 在 2019/2/12 下午9:54, Philipp Tomsich 写道:
>>>> On 12.02.2019, at 13:38, David Wu <david.wu at rock-chips.com> wrote:
>>>>
>>>> Hi Philipp,
>>>>
>>>> 在 2019/2/10 上午2:24, Philipp Tomsich 写道:
>>>>> That said, I have been fighting issues from this patchset when trying to read
>>>>> from devices on the i2c0 bus on a RK3399—which had me add a “simple”
>>>>> pinctrl device again, as pulling all the dependencies into the SPL is a pain.
>>>>
>>>> I think you can also add the simple ops if necessary. Full pinctrl
>>>> should only be used at the U-boot stage, or the SPL stage where the TPL is available.
>>>>
>>>> For most boards about 3288, there is no need to enable pinctrl at SPL
>>>> stage, such as Tinker board.
>>> Could you check whether TPL_MAX_SIZE and SPL_MAX_SIZE are correct for
>>> the RK3288? If not, please submit a patch.
>>
>> It is correct, 32KB.
> 
> Interesting...
> I wonder why the build did not fail then, if SPL became too big.

Popmetal is okay, the SPL is too big for Tinker, i didn't test Tinker.

> 
> Anyway, let’s file this under “things to revisit, if the problem recurs”.
> 
> Thanks,
> Philipp.
> 
> 
> 
> 
>