[U-Boot] [PATCH v4] arm64: mvebu: Add basic support for uDPU board

[Stefan Roese]

On 28.01.19 17:27, Vladimir Vid wrote:
> This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC.
> micro-DPU is the single-port FTTdp "distribution point unit" made by Methode Electronics
> which offers complete modularity with replaceable SFP modules both for uplink and downlink
> (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable).
> 
> On-board features:
> - 512 MiB DDR3
> - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC
> - USB 2.0 Type-C connector
> - 4GB eMMC
> - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type)
> 
> Cc: Luka Perkov <luka.perkov at sartura.hr>
> Cc: Luis Torres <luis.torres at methode.com>
> Cc: Scott Roberts <scott.roberts at telus.com>
> Cc: Paul Arola <paul.arola at telus.com>
> Cc: Stefan Roese <sr at denx.de>
> Signed-off-by: Vladimir Vid <vladimir.vid at sartura.hr>
> ---
> 
> v4 changes:
> 
> - moved u-boot specific properties to armada-3720-uDPU-u-boot.dtsi
> - added additional 'u-boot,dm-pre-reloc' on sdhci1 (eMMC)

Applied to u-boot-marvell/master

Thanks,
Stefan