[U-Boot] [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array
Jagan Teki
jagan at amarulasolutions.com
Thu Feb 14 17:09:50 UTC 2019
+ Vignesh
On Mon, Jan 7, 2019 at 11:05 AM Ye Li <ye.li at nxp.com> wrote:
>
> On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters
> and IDs to flash parameter array. Otherwise, the flash probe will fails.
>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> ---
> drivers/mtd/spi/spi_flash_ids.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c
> index ad0a0c8..17f9893 100644
> --- a/drivers/mtd/spi/spi_flash_ids.c
> +++ b/drivers/mtd/spi/spi_flash_ids.c
> @@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = {
> {"mx25u25635f", INFO(0xc22539, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) },
> {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) },
> {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) },
> + {"mx25r6435f", INFO(0xc22817, 0x0, 64 * 1024, 128, RD_FULL | SECT_4K) },
Look like this would also support WR_QPP, how about updating the same?
More information about the U-Boot
mailing list