[U-Boot] [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array

Vignesh R vigneshr at ti.com
Fri Feb 15 06:15:06 UTC 2019



On 14/02/19 10:39 PM, Jagan Teki wrote:
> + Vignesh
> 
> On Mon, Jan 7, 2019 at 11:05 AM Ye Li <ye.li at nxp.com> wrote:
>>
>> On i.MX7ULP EVK board, we use MX25R6435F NOR flash, add its parameters
>> and IDs to flash parameter array. Otherwise, the flash probe will fails.
>>
>> Signed-off-by: Ye Li <ye.li at nxp.com>
>> ---
>>  drivers/mtd/spi/spi_flash_ids.c | 1 +

This file no longer exists after recent SPI NOR migration. Could you
rebase on the latest? The capabilities flags are now same as kernel.


>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c
>> index ad0a0c8..17f9893 100644
>> --- a/drivers/mtd/spi/spi_flash_ids.c
>> +++ b/drivers/mtd/spi/spi_flash_ids.c
>> @@ -94,6 +94,7 @@ const struct spi_flash_info spi_flash_ids[] = {
>>         {"mx25u25635f",    INFO(0xc22539, 0x0, 64 * 1024,   512, RD_FULL | WR_QPP) },
>>         {"mx66u51235f",    INFO(0xc2253a, 0x0, 64 * 1024,  1024, RD_FULL | WR_QPP) },
>>         {"mx66l1g45g",     INFO(0xc2201b, 0x0, 64 * 1024,  2048, RD_FULL | WR_QPP) },
>> +       {"mx25r6435f",     INFO(0xc22817, 0x0, 64 * 1024,  128, RD_FULL | SECT_4K) },
> 
> Look like this would also support WR_QPP, how about updating the same?
> 

-- 
Regards
Vignesh


More information about the U-Boot mailing list