[U-Boot] [PATCH 0/2] mtd: rawnand: add STM32 FMC2 NAND flash controller driver
Christophe Kerello
christophe.kerello at st.com
Wed Feb 20 16:18:47 UTC 2019
This patchset adds the support for the STMicroelectronics FMC2 NAND flash
controller found on STM32MP SOCs.
This patchset supports:
- the polling mode feature
- a maximum 8k page size
- following ECC strength and step size
- nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8)
- nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
- nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Extended
ecc based on HAMMING)
This patchset has been tested on Micron MT29F8G08ABACAH4 (8-bit SLC NAND).
Christophe Kerello (2):
dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller
documentation
mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt | 59 ++
drivers/mtd/nand/raw/Kconfig | 11 +
drivers/mtd/nand/raw/Makefile | 1 +
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 1092 ++++++++++++++++++++++
4 files changed, 1163 insertions(+)
create mode 100644 doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt
create mode 100644 drivers/mtd/nand/raw/stm32_fmc2_nand.c
--
1.9.1
More information about the U-Boot
mailing list