[U-Boot] [PATCH v4 05/22] pcm052: board: Do not enable I2C2 code in the board file

[Lukasz Majewski]

As the I2C2 clock is now enabled in the generic clock code, we can remove
this code from a board file.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

---

Changes in v4: None
Changes in v3:
- New patch (separate board code patch)

Changes in v2: None

 board/phytec/pcm052/pcm052.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/phytec/pcm052/pcm052.c b/board/phytec/pcm052/pcm052.c
index f988af2abc..cfc8009102 100644
--- a/board/phytec/pcm052/pcm052.c
+++ b/board/phytec/pcm052/pcm052.c
@@ -485,7 +485,7 @@ static void clock_init(void)
 	clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
 			CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
-			CCM_CCGR10_NFC_CTRL_MASK | CCM_CCGR10_I2C2_CTRL_MASK);
+			CCM_CCGR10_NFC_CTRL_MASK);
 
 	clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN,
 			ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT);
-- 
2.11.0