[U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken

[David Wu]

Hi Philipp,

在 2019/2/10 上午2:24, Philipp Tomsich 写道:
> That said, I have been fighting issues from this patchset when trying to read
> from devices on the i2c0 bus on a RK3399—which had me add a “simple”
> pinctrl device again, as pulling all the dependencies into the SPL is a pain.
> 

I think you can also add the simple ops if necessary. Full pinctrl
should only be used at the U-boot stage, or the SPL stage where the TPL 
is available.

For most boards about 3288, there is no need to enable pinctrl at SPL
stage, such as Tinker board.


> Unfortunately, in this merge I had to make a judgement call between insisting
> on code-quality and getting the full pinctrl-driver merged.  With this release
> cycle being longer and having 5 RCs, I figured we’ll have time to iron out any
> wrinkles...