[U-Boot] [PATCH] drivers/net/fec: phy_init: remove redundant logic

[Hannes Schmelzer]

The phy_connect_dev(...) function from phy.c does all the handling
(inclusive catching fixed-link).

So we drop here the single steps and call just phy_connect_dev(...).

Signed-off-by: Hannes Schmelzer <hannes.schmelzer at br-automation.com>

---

 drivers/net/fec_mxc.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 1a59026..3e75fba 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1284,22 +1284,16 @@ static int fec_phy_init(struct fec_priv *priv, struct udevice *dev)
 {
 	struct phy_device *phydev;
 	int addr;
-	int mask = 0xffffffff;
 
 	addr = device_get_phy_addr(dev);
-	if (addr >= 0)
-		mask = 1 << addr;
-
 #ifdef CONFIG_FEC_MXC_PHYADDR
-	mask = 1 << CONFIG_FEC_MXC_PHYADDR;
+	addr = CONFIG_FEC_MXC_PHYADDR;
 #endif
 
-	phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
+	phydev = phy_connect(priv->bus, addr, dev, priv->interface);
 	if (!phydev)
 		return -ENODEV;
 
-	phy_connect_dev(phydev, dev);
-
 	priv->phydev = phydev;
 	phy_config(phydev);
 
-- 
2.7.4