[U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig

Marek Vasut marex at denx.de
Thu Feb 28 21:27:14 UTC 2019


On 2/28/19 9:33 PM, Simon Goldschmidt wrote:
> Instead of fixing the SPL stack to 64 KiB in the board config header via
> CONFIG_SYS_SPL_MALLOC_SIZE, let's just use CONFIG_SPL_SYS_MALLOC_F_LEN
> in the defconfig.
> 
> This also has the advandage that it removes sub-mach specific ifdefs in
> socfpga_common.h.
> 
> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>

Can't we default these stack sizes with imply in Kconfig files instead ?
Then they won't have to be in the defconfigs either.

> ---
> 
>  configs/socfpga_arria10_defconfig |  1 +
>  include/configs/socfpga_common.h  | 14 --------------
>  2 files changed, 1 insertion(+), 14 deletions(-)
> 
> diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
> index f321a0ac3b..8d0479cc05 100644
> --- a/configs/socfpga_arria10_defconfig
> +++ b/configs/socfpga_arria10_defconfig
> @@ -2,6 +2,7 @@ CONFIG_ARM=y
>  CONFIG_ARCH_SOCFPGA=y
>  CONFIG_SYS_TEXT_BASE=0x01000040
>  CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
>  CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
>  CONFIG_SPL=y
>  CONFIG_IDENT_STRING="socfpga_arria10"
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index a3fbca0a5d..c23b34186a 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -251,16 +251,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>  #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
>  #define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_INIT_RAM_SIZE
>  
> -#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> -/* SPL memory allocation configuration, this is for FAT implementation */
> -#ifndef CONFIG_SYS_SPL_MALLOC_START
> -#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00010000
> -#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_INIT_RAM_SIZE - \
> -					 CONFIG_SYS_SPL_MALLOC_SIZE + \
> -					 CONFIG_SYS_INIT_RAM_ADDR)
> -#endif
> -#endif
> -
>  /* SPL SDMMC boot support */
>  #ifdef CONFIG_SPL_MMC_SUPPORT
>  #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
> @@ -287,11 +277,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>  /*
>   * Stack setup
>   */
> -#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
> -#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> -#define CONFIG_SPL_STACK		CONFIG_SYS_SPL_MALLOC_START
> -#endif
>  
>  /* Extra Environment */
>  #ifndef CONFIG_SPL_BUILD
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list