[U-Boot] [PATCH v1 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate

Marcel Ziswiler marcel at ziswiler.com
Fri Feb 1 16:29:12 UTC 2019


From: Max Krummenacher <max.krummenacher at toradex.com>

During porting to 2016.11 the check of a SD (mmc2) interface
was dropped, this was unintended.

Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

---

 include/configs/apalis_imx6.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 5f865e1f08..7df32feb0d 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -210,8 +210,10 @@
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
-	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
-		"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
+		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
+		"|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
+		" ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
 	"setup=setenv setupargs fec_mac=${ethaddr} " \
 		"consoleblank=0 no_console_suspend=1 console=tty1 " \
-- 
2.20.1



More information about the U-Boot mailing list