[U-Boot] [PATCH v2 4/7] arm64: zynqmp: Switch all platfroms to DM_I2C
Heiko Schocher
hs at denx.de
Thu Feb 7 06:58:19 UTC 2019
Hello Michal,
Am 05.02.2019 um 10:55 schrieb Michal Simek:
> CONFIG_PCA953X is not needed because of PCA953X is integrated in gpio
> subsystem already. That's why also remove CMD_PCA953X which is only for
> this driver.
>
> zcu102/zcu104-revC/zcu106/zcu111 contain links to eeprom which stores MAC address.
>
> DM_I2C is not enabled for the whole SoC because it increase size for
> mini configurations and there is no I2C symbol present to setup
> dependencies.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
> Changes in v2: None
>
> arch/arm/dts/zynqmp-zcu102-revA.dts | 1 +
> arch/arm/dts/zynqmp-zcu104-revC.dts | 1 +
> arch/arm/dts/zynqmp-zcu106-revA.dts | 1 +
> arch/arm/dts/zynqmp-zcu111-revA.dts | 1 +
> configs/avnet_ultra96_rev1_defconfig | 6 ++++--
> configs/xilinx_zynqmp_zcu100_revC_defconfig | 6 ++++--
> configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 12 ++++++-----
> configs/xilinx_zynqmp_zcu102_revA_defconfig | 13 ++++++-----
> configs/xilinx_zynqmp_zcu102_revB_defconfig | 13 ++++++-----
> configs/xilinx_zynqmp_zcu104_revA_defconfig | 11 ++++++----
> configs/xilinx_zynqmp_zcu104_revC_defconfig | 11 ++++++----
> configs/xilinx_zynqmp_zcu106_revA_defconfig | 12 ++++++-----
> configs/xilinx_zynqmp_zcu111_revA_defconfig | 12 ++++++-----
> include/configs/xilinx_zynqmp.h | 5 -----
> include/configs/xilinx_zynqmp_zcu100.h | 15 -------------
> include/configs/xilinx_zynqmp_zcu102.h | 29 -------------------------
> include/configs/xilinx_zynqmp_zcu104.h | 17 ---------------
> include/configs/xilinx_zynqmp_zcu104_revC.h | 3 ---
> include/configs/xilinx_zynqmp_zcu106.h | 28 ------------------------
> include/configs/xilinx_zynqmp_zcu111.h | 31 ---------------------------
> 20 files changed, 63 insertions(+), 165 deletions(-)
Reviewed-by: Heiko Schocher <hs at denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
More information about the U-Boot
mailing list