[U-Boot] [PATCH 14/14] imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)
Tim Harvey
tharvey at gateworks.com
Mon Feb 4 21:11:00 UTC 2019
device-tree paths should never be used that reference node addresses
making an assumption about leading zeros. They should not be there per
the device-tree specification however they have been there until Linux
4.15 when they were removed via kernel commit
8dccafaa281aa1d240a58bbcdff338aec114a021.
This fixes various issues which will occur when using Linux 4.15+
that are being fixed up on a per model per PCB revision basis such as:
- enabling MMC UHS-I on board revisions that support it
- enabling PWM based on hwconfig
- fixing PCIe reset on GW552x
- removing cpu external watchdog reset on boards that do not support it
- populate PCI dt nodes based on PCI scan in order to fix GW16082
interrupt mapping and inject MAC address for PCI based GbE
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
board/gateworks/gw_ventana/gw_ventana.c | 90 +++++++++++--------------
1 file changed, 41 insertions(+), 49 deletions(-)
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 0b2258e87a..c63fb41e1b 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -879,34 +879,12 @@ static int ft_sethdmiinfmt(void *blob, char *mode)
return 0;
}
-/* enable a property of a node if the node is found */
-static inline void ft_enable_path(void *blob, const char *path)
-{
- int i = fdt_path_offset(blob, path);
- if (i >= 0) {
- debug("enabling %s\n", path);
- fdt_status_okay(blob, i);
- }
-}
-
-/* remove a property of a node if the node is found */
-static inline void ft_delprop_path(void *blob, const char *path,
- const char *name)
-{
- int i = fdt_path_offset(blob, path);
- if (i) {
- debug("removing %s/%s\n", path, name);
- fdt_delprop(blob, i, name);
- }
-}
-
#if defined(CONFIG_CMD_PCI)
#define PCI_ID(x) ( \
(PCI_BUS(x->devfn)<<16)| \
(PCI_DEV(x->devfn)<<11)| \
(PCI_FUNC(x->devfn)<<8) \
)
-#define PCIE_PATH "/soc/pcie at 0x01000000"
int fdt_add_pci_node(void *blob, int par, struct pci_dev *dev)
{
uint32_t reg[5];
@@ -939,7 +917,7 @@ int fdt_add_pci_path(void *blob, struct pci_dev *dev)
int k, np;
/* build list of parents */
- np = fdt_path_offset(blob, PCIE_PATH);
+ np = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie");
if (np < 0)
return np;
@@ -976,7 +954,7 @@ int fdt_fixup_gw16082(void *blob, int np, struct pci_dev *dev)
int i;
/* build irq-map based on host controllers map */
- host = fdt_path_offset(blob, PCIE_PATH);
+ host = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie");
if (host < 0) {
printf(" %s failed: missing host\n", __func__);
return host;
@@ -1118,10 +1096,14 @@ void ft_board_pci_fixup(void *blob, bd_t *bd)
}
#endif /* if defined(CONFIG_CMD_PCI) */
-void ft_board_wdog_fixup(void *blob, const char *path)
+void ft_board_wdog_fixup(void *blob, phys_addr_t addr)
{
- ft_delprop_path(blob, path, "ext-reset-output");
- ft_delprop_path(blob, path, "fsl,ext-reset-output");
+ int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr);
+
+ if (off) {
+ fdt_delprop(blob, off, "ext-reset-output");
+ fdt_delprop(blob, off, "fsl,ext-reset-output");
+ }
}
/*
@@ -1133,10 +1115,11 @@ void ft_board_wdog_fixup(void *blob, const char *path)
* - board (full model from EEPROM)
* - peripherals removed from DTB if not loaded on board (per EEPROM config)
*/
-#define UART1_PATH "/soc/aips-bus at 02100000/serial at 021ec000"
-#define WDOG1_PATH "/soc/aips-bus at 02000000/wdog at 020bc000"
-#define WDOG2_PATH "/soc/aips-bus at 02000000/wdog at 020c0000"
-#define GPIO3_PATH "/soc/aips-bus at 02000000/gpio at 020a4000"
+#define WDOG1_ADDR 0x20bc000
+#define WDOG2_ADDR 0x20c0000
+#define GPIO3_ADDR 0x20a4000
+#define USDHC3_ADDR 0x2198000
+#define PWM0_ADDR 0x2080000
int ft_board_setup(void *blob, bd_t *bd)
{
struct ventana_board_info *info = &ventana_info;
@@ -1199,14 +1182,15 @@ int ft_board_setup(void *blob, bd_t *bd)
* errata causing wdog timer to be unreliable.
*/
if (rev >= 'A' && rev < 'C') {
- i = fdt_path_offset(blob, WDOG1_PATH);
+ i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt",
+ WDOG1_ADDR);
if (i)
fdt_status_disabled(blob, i);
}
/* GW51xx-E adds WDOG1_B external reset */
if (rev < 'E')
- ft_board_wdog_fixup(blob, WDOG1_PATH);
+ ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW52xx:
@@ -1222,7 +1206,8 @@ int ft_board_setup(void *blob, bd_t *bd)
"reset-gpio", NULL);
if (range) {
- i = fdt_path_offset(blob, GPIO3_PATH);
+ i = fdt_node_offset_by_compat_reg(blob,
+ "fsl,imx6q-gpio", GPIO3_ADDR);
if (i)
handle = fdt_get_phandle(blob, i);
if (handle) {
@@ -1237,18 +1222,19 @@ int ft_board_setup(void *blob, bd_t *bd)
gpio_cfg[board_type].usd_vsel = 0;
/* GW522x-B adds WDOG1_B external reset */
- ft_board_wdog_fixup(blob, WDOG1_PATH);
+ if (rev < 'B')
+ ft_board_wdog_fixup(blob, WDOG1_ADDR);
}
/* GW520x-E adds WDOG1_B external reset */
else if (info->model[4] == '0' && rev < 'E')
- ft_board_wdog_fixup(blob, WDOG1_PATH);
+ ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW53xx:
/* GW53xx-E adds WDOG1_B external reset */
if (rev < 'E')
- ft_board_wdog_fixup(blob, WDOG1_PATH);
+ ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW54xx:
@@ -1256,13 +1242,12 @@ int ft_board_setup(void *blob, bd_t *bd)
* disable serial2 node for GW54xx for compatibility with older
* 3.10.x kernel that improperly had this node enabled in the DT
*/
- i = fdt_path_offset(blob, UART1_PATH);
- if (i)
- fdt_del_node(blob, i);
+ fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED,
+ 0);
/* GW54xx-E adds WDOG2_B external reset */
if (rev < 'E')
- ft_board_wdog_fixup(blob, WDOG2_PATH);
+ ft_board_wdog_fixup(blob, WDOG2_ADDR);
break;
case GW551x:
@@ -1311,13 +1296,13 @@ int ft_board_setup(void *blob, bd_t *bd)
/* GW551x-C adds WDOG1_B external reset */
if (rev < 'C')
- ft_board_wdog_fixup(blob, WDOG1_PATH);
+ ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW5901:
case GW5902:
/* GW5901/GW5901 revB adds WDOG1_B as an external reset */
if (rev < 'B')
- ft_board_wdog_fixup(blob, WDOG1_PATH);
+ ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
}
@@ -1331,20 +1316,27 @@ int ft_board_setup(void *blob, bd_t *bd)
continue;
if (hwconfig_subarg_cmp(arg, "mode", "pwm") && cfg->pwm_param)
{
- char path[48];
- sprintf(path, "/soc/aips-bus at 02000000/pwm@%08x",
- 0x02080000 + (0x4000 * (cfg->pwm_param - 1)));
+ phys_addr_t addr;
+ int off;
+
printf(" Enabling pwm%d for DIO%d\n",
cfg->pwm_param, i);
- ft_enable_path(blob, path);
+ addr = PWM0_ADDR + (0x4000 * (cfg->pwm_param - 1));
+ off = fdt_node_offset_by_compat_reg(blob,
+ "fsl,imx6q-pwm",
+ addr);
+ if (off)
+ fdt_status_okay(blob, off);
}
}
/* remove no-1-8-v if UHS-I support is present */
if (gpio_cfg[board_type].usd_vsel) {
debug("Enabling UHS-I support\n");
- ft_delprop_path(blob, "/soc/aips-bus at 02100000/usdhc at 02198000",
- "no-1-8-v");
+ i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc",
+ USDHC3_ADDR);
+ if (i)
+ fdt_delprop(blob, i, "no-1-8-v");
}
#if defined(CONFIG_CMD_PCI)
--
2.17.1
More information about the U-Boot
mailing list