[U-Boot] [PATCH v4 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support

[Abel Vesa]

With DM and FIT enabled in SPL, there is an sram overflow. By disabling
CONFIG_SPL_DOS_PARTITION, CONFIG_SPL_EXT_SUPPORT and
CONFIG_SPL_EFI_PARTITION, we get to keep the 'one binary to fit all'
for imx6[q|qp|dl] on sabresd since the final SPL image is now under 64KB.

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
 configs/mx6sabresd_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index e8fd9b4..27ace02e 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -22,7 +22,6 @@ CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
-CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_HOST_SUPPORT=y
@@ -53,6 +52,8 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_EFI_PARTITION=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
-- 
2.7.4