[U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL
Jagan Teki
jagan at amarulasolutions.com
Fri Feb 1 15:48:01 UTC 2019
On Thu, Jan 31, 2019 at 11:20 PM Vignesh R <vigneshr at ti.com> wrote:
>
>
>
> On 31/01/19 5:36 PM, Jagan Teki wrote:
> > On Tue, Jan 29, 2019 at 11:29 AM Vignesh R <vigneshr at ti.com> wrote:
> >>
> >> Add a tiny SPI flash stack that just supports reading data/images from
> >> SPI flash. This is useful for boards that have SPL size constraints and
> >> would need to use SPI flash framework just to read images/data from
> >> flash. There is approximately 1.5 to 2KB savings with this.
> >>
> >> Based on prior work of reducing spi flash id table by
> >> Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> >>
> >> Signed-off-by: Vignesh R <vigneshr at ti.com>
> >> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> >> Tested-by: Stefan Roese <sr at denx.de>
> >> Tested-by: Horatiu Vultur <horatiu.vultur at microchip.com>
> >> ---
> >> common/spl/Kconfig | 11 +-
> >> drivers/mtd/spi/Makefile | 10 +-
> >> drivers/mtd/spi/sf_internal.h | 2 +
> >> drivers/mtd/spi/spi-nor-core.c | 266 +----------
> >> drivers/mtd/spi/spi-nor-ids.c | 297 ++++++++++++
> >> drivers/mtd/spi/spi-nor-tiny.c | 810 +++++++++++++++++++++++++++++++++
> >> 6 files changed, 1132 insertions(+), 264 deletions(-)
> >> create mode 100644 drivers/mtd/spi/spi-nor-ids.c
> >> create mode 100644 drivers/mtd/spi/spi-nor-tiny.c
> >>
> >> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> >> index 2e1dd2705a62..416f5933b0d9 100644
> >> --- a/common/spl/Kconfig
> >> +++ b/common/spl/Kconfig
> >> @@ -732,9 +732,18 @@ config SPL_SPI_FLASH_SUPPORT
> >>
> >> if SPL_SPI_FLASH_SUPPORT
> >>
> >> +config SPL_SPI_FLASH_TINY
> >> + bool "Enable low footprint SPL SPI Flash support"
> >> + depends on !SPI_FLASH_BAR
> >> + help
> >> + Enable lightweight SPL SPI Flash support that supports just reading
> >> + data/images from flash. No support to write/erase flash. Enable
> >> + this if you have SPL size limitations and don't need full
> >> + fledged SPI flash support.
> >> +
> >> config SPL_SPI_FLASH_SFDP_SUPPORT
> >> bool "SFDP table parsing support for SPI NOR flashes"
> >> - depends on !SPI_FLASH_BAR
> >> + depends on !SPI_FLASH_BAR && !SPL_SPI_FLASH_TINY
> >> help
> >> Enable support for parsing and auto discovery of parameters for
> >> SPI NOR flashes using Serial Flash Discoverable Parameters (SFDP)
> >> diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
> >> index 70058d3df2b9..f99f6cb16e29 100644
> >> --- a/drivers/mtd/spi/Makefile
> >> +++ b/drivers/mtd/spi/Makefile
> >> @@ -4,12 +4,20 @@
> >> # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> >>
> >> obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o
> >> +spi-nor-y := sf_probe.o spi-nor-ids.o
> >>
> >> ifdef CONFIG_SPL_BUILD
> >> obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o
> >> +ifeq ($(CONFIG_SPL_SPI_FLASH_TINY),y)
> >> +spi-nor-y += spi-nor-tiny.o
> >> +else
> >> +spi-nor-y += spi-nor-core.o
> >> +endif
> >> +else
> >> +spi-nor-y += spi-nor-core.o
> >> endif
> >>
> >> -obj-$(CONFIG_SPI_FLASH) += sf_probe.o spi-nor-core.o
> >> +obj-$(CONFIG_SPI_FLASH) += spi-nor.o
> >> obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o sf.o
> >> obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
> >> obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
> >> diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
> >> index fd00e0d1b23b..a6bf734830a7 100644
> >> --- a/drivers/mtd/spi/sf_internal.h
> >> +++ b/drivers/mtd/spi/sf_internal.h
> >> @@ -16,7 +16,9 @@
> >> #define SPI_NOR_MAX_ADDR_WIDTH 4
> >>
> >> struct flash_info {
> >> +#if !CONFIG_IS_ENABLED(SPI_FLASH_TINY)
> >> char *name;
> >> +#endif
> >>
> >> /*
> >> * This array stores the ID bytes.
> >> diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
> >> index dbaaf45c7e1e..80633f8fd070 100644
> >> --- a/drivers/mtd/spi/spi-nor-core.c
> >> +++ b/drivers/mtd/spi/spi-nor-core.c
> >> @@ -879,284 +879,26 @@ static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
> >> }
> >> #endif /* CONFIG_SPI_FLASH_STMICRO */
> >>
> >> -/* Used when the "_ext_id" is two bytes at most */
> >> -#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
> >> - .id = { \
> >> - ((_jedec_id) >> 16) & 0xff, \
> >> - ((_jedec_id) >> 8) & 0xff, \
> >> - (_jedec_id) & 0xff, \
> >> - ((_ext_id) >> 8) & 0xff, \
> >> - (_ext_id) & 0xff, \
> >> - }, \
> >> - .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
> >> - .sector_size = (_sector_size), \
> >> - .n_sectors = (_n_sectors), \
> >> - .page_size = 256, \
> >> - .flags = (_flags),
> >> -
> >> -#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
> >> - .id = { \
> >> - ((_jedec_id) >> 16) & 0xff, \
> >> - ((_jedec_id) >> 8) & 0xff, \
> >> - (_jedec_id) & 0xff, \
> >> - ((_ext_id) >> 16) & 0xff, \
> >> - ((_ext_id) >> 8) & 0xff, \
> >> - (_ext_id) & 0xff, \
> >> - }, \
> >> - .id_len = 6, \
> >> - .sector_size = (_sector_size), \
> >> - .n_sectors = (_n_sectors), \
> >> - .page_size = 256, \
> >> - .flags = (_flags),
> >> -
> >> -/* NOTE: double check command sets and memory organization when you add
> >> - * more nor chips. This current list focusses on newer chips, which
> >> - * have been converging on command sets which including JEDEC ID.
> >> - *
> >> - * All newly added entries should describe *hardware* and should use SECT_4K
> >> - * (or SECT_4K_PMC) if hardware supports erasing 4 KiB sectors. For usage
> >> - * scenarios excluding small sectors there is config option that can be
> >> - * disabled: CONFIG_MTD_SPI_NOR_USE_4K_SECTORS.
> >> - * For historical (and compatibility) reasons (before we got above config) some
> >> - * old entries may be missing 4K flag.
> >> - */
> >> -const struct flash_info spi_nor_ids[] = {
> >> -#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
> >> - /* Atmel -- some are (confusingly) marketed as "DataFlash" */
> >> - { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
> >> - { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
> >> -
> >> - { "at45db011d", INFO(0x1f2200, 0, 64 * 1024, 4, SECT_4K) },
> >> - { "at45db021d", INFO(0x1f2300, 0, 64 * 1024, 8, SECT_4K) },
> >> - { "at45db041d", INFO(0x1f2400, 0, 64 * 1024, 8, SECT_4K) },
> >> - { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
> >> - { "at45db161d", INFO(0x1f2600, 0, 64 * 1024, 32, SECT_4K) },
> >> - { "at45db321d", INFO(0x1f2700, 0, 64 * 1024, 64, SECT_4K) },
> >> - { "at45db641d", INFO(0x1f2800, 0, 64 * 1024, 128, SECT_4K) },
> >> - { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_EON /* EON */
> >> - /* EON -- en25xxx */
> >> - { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
> >> - { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
> >> - { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
> >> - { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
> >> - /* GigaDevice */
> >> - {
> >> - "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> - {
> >> - "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> - {
> >> - "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> - {
> >> - "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
> >> - /* ISSI */
> >> - { "is25lq040b", INFO(0x9d4013, 0, 64 * 1024, 8,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "is25lp032", INFO(0x9d6016, 0, 64 * 1024, 64, 0) },
> >> - { "is25lp064", INFO(0x9d6017, 0, 64 * 1024, 128, 0) },
> >> - { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256,
> >> - SECT_4K | SPI_NOR_DUAL_READ) },
> >> - { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512,
> >> - SECT_4K | SPI_NOR_DUAL_READ) },
> >> - { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
> >> - /* Macronix */
> >> - { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
> >> - { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
> >> - { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
> >> - { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
> >> - { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) },
> >> - { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
> >> - { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) },
> >> - { "mx25u1635e", INFO(0xc22535, 0, 64 * 1024, 32, SECT_4K) },
> >> - { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
> >> - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
> >> - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
> >> - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
> >> - { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
> >> - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> >> - { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> >> - { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "mx25l1633e", INFO(0xc22415, 0, 64 * 1024, 32, SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SECT_4K) },
> >> -#endif
> >> -
> >> -#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
> >> - /* Micron */
> >> - { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_QUAD_READ) },
> >> - { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
> >> - { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
> >> - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
> >> - { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
> >> - { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
> >> - { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
> >> - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
> >> - { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
> >> - { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
> >> - { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
> >> - { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
> >> - { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
> >> - /* Spansion/Cypress -- single (large) sector size only, at least
> >> - * for the chips listed here (without boot sectors).
> >> - */
> >> - { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
> >> - { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> >> - { "s25fl512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> >> - { "s25fl512s_256k", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> >> - { "s25fl512s_64k", INFO(0x010220, 0x4d01, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> >> - { "s25fl512s_512k", INFO(0x010220, 0x4f00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> >> - { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
> >> - { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
> >> - { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> >> - { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> >> - { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
> >> - { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
> >> - { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
> >> - { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
> >> - { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
> >> - { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
> >> - { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) },
> >> - { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_SST /* SST */
> >> - /* SST -- large erase sizes are "overlays", "sectors" are 4K */
> >> - { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
> >> - { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
> >> - { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
> >> - { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
> >> - { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
> >> - { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) },
> >> - { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) },
> >> - { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) },
> >> - { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K) },
> >> - { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) },
> >> - { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
> >> - { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
> >> - { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "sst26wf016", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K) },
> >> - { "sst26wf032", INFO(0xbf2622, 0, 64 * 1024, 64, SECT_4K) },
> >> - { "sst26wf064", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K) },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
> >> - /* ST Microelectronics -- newer production may have feature updates */
> >> - { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
> >> - { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) },
> >> - { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) },
> >> - { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) },
> >> - { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) },
> >> - { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
> >> - { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
> >> - { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
> >> - { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },
> >> - { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
> >> - /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
> >> - { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
> >> - { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
> >> - { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
> >> - { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
> >> - { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
> >> - { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
> >> - {
> >> - "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> - { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
> >> - { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
> >> - { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
> >> - { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4, SECT_4K) },
> >> - { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
> >> - {
> >> - "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> - {
> >> - "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> - { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
> >> - { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
> >> - {
> >> - "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> - {
> >> - "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
> >> - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> >> - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> >> - },
> >> - { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
> >> - { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
> >> - { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
> >> - { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
> >> - SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
> >> -#endif
> >> -#ifdef CONFIG_SPI_FLASH_XMC
> >> - /* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
> >> - { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> - { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> >> -#endif
> >> - { },
> >> -};
> >> -
> >> static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
> >> {
> >> int tmp;
> >> u8 id[SPI_NOR_MAX_ID_LEN];
> >> const struct flash_info *info;
> >>
> >> - if (!ARRAY_SIZE(spi_nor_ids))
> >> - return ERR_PTR(-ENODEV);
> >> -
> >> tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
> >> if (tmp < 0) {
> >> dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp);
> >> return ERR_PTR(tmp);
> >> }
> >>
> >> - for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
> >> - info = &spi_nor_ids[tmp];
> >> + info = spi_nor_ids;
> >> + for (; info->name; info++) {
> >> if (info->id_len) {
> >> if (!memcmp(info->id, id, info->id_len))
> >> - return &spi_nor_ids[tmp];
> >> + return info;
> >> }
> >> }
> >> +
> >> dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
> >> id[0], id[1], id[2]);
> >> return ERR_PTR(-ENODEV);
> >
> > This doesn't look good to me, this change is part of 08/20 and now it
> > removed. better do the same change in 08/20 by adding new file
> > spi-nor-ids.c
> >
>
> This is intentional. Patch 8-11 clearly shows what all is being sync'd
> from Kernel and I would like to keep that as is.
> Merging U-Boot specific changes with those patches does not provide a
> clean history
> spi-nor-ids table is moved out of spi-nor-core.c in this patch because
> we need it for two separate compilation units (spi-nor-tiny and
> spi-nor-core).
Understand this point, but since it's not a direct commit sync and we
even add changes wrt u-boot and remove unneeded changes related to
Linux. It's fine to create -ids.c file in the same commit, otherwise
it is simply adding code and removing the same in following commit
doesn't suit for bisectable.
More information about the U-Boot
mailing list