[U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default

Simon Goldschmidt simon.k.r.goldschmidt at gmail.com
Fri Feb 22 05:55:20 UTC 2019


On Thu, Feb 21, 2019 at 11:17 PM Marek Vasut <marex at denx.de> wrote:
>
> On 2/21/19 11:09 PM, Simon Goldschmidt wrote:
> >
> >
> > Am Do., 21. Feb. 2019, 22:56 hat Marek Vasut <marex at denx.de
> > <mailto:marex at denx.de>> geschrieben:
> >
> >     On 2/21/19 10:43 PM, Simon Goldschmidt wrote:
> >     > To keep the current behaviour of taking all peripherals out of reset
> >     > before booting the OS before removing that code from socfpga gen5 SPL,
> >     > this enables the new behaviour by default for all gen5 boards by
> >     adding
> >     > the environment variable "socfpga_permodrst_ungate=1" to the default
> >     > environment.
> >     >
> >     > This can be overridden in board config files or by saving an
> >     environment
> >     > without this variable enabled.
> >     >
> >     > Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com
> >     <mailto:simon.k.r.goldschmidt at gmail.com>>
> >     > ---
> >     >
> >     > Changes in v2:
> >     > - this patch is new in v2
> >     >
> >     >  include/configs/socfpga_common.h | 14 ++++++++++++++
> >     >  1 file changed, 14 insertions(+)
> >     >
> >     > diff --git a/include/configs/socfpga_common.h
> >     b/include/configs/socfpga_common.h
> >     > index c9cbf8f5e3..2510c6fd7b 100644
> >     > --- a/include/configs/socfpga_common.h
> >     > +++ b/include/configs/socfpga_common.h
> >     > @@ -321,6 +321,19 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> >     >
> >     >  #include <config_distro_bootcmd.h>
> >     >
> >     > +#ifdef CONFIG_TARGET_SOCFPGA_GEN5
> >     > +/*
> >     > + * Handle compatibility for peripheral reset for Linux kernels
> >     that haven't
> >     > + * implemented peripheral reset for all drivers.
> >     > + * Define this to "" disable this compatibility.
> >     > + */
> >     > +#ifndef SOCFPGA_PERMODRST_UNGATE
> >     > +#define SOCFPGA_PERMODRST_UNGATE "socfpga_permodrst_ungate=1\0"
> >     > +#endif
> >     > +#else
> >     > +#define SOCFPGA_PERMODRST_UNGATE ""
> >     > +#endif
> >
> >     Just add this socfpga_permodrst_ungate to the default end and drop all
> >     those macros/Kconfig options.
> >
> >
> > But how would it then be overridden?
>
> User would setenv it to "" and saveenv ? I might be missing something
> obvious.

Of course. I meant how to override it for the default env. E.g. to test on
some boards.

But it's probably enough that CONFIG_EXTRA_ENV_SETTINGS is overridable.

Regards,
Simon


More information about the U-Boot mailing list