[U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Abel Vesa
abel.vesa at nxp.com
Fri Feb 1 16:40:07 UTC 2019
Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL,
makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE.
Everything that is not part of the usb storage support in SPL is now
build under SPL_USB_HOST_SUPPORT.
Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
arch/arm/include/asm/arch-am33xx/spl.h | 2 +-
arch/arm/mach-omap2/boot-common.c | 2 +-
common/Makefile | 5 +++--
common/spl/Kconfig | 4 ++--
common/spl/Makefile | 2 +-
common/spl/spl_usb.c | 4 ----
configs/am43xx_evm_usbhost_boot_defconfig | 2 +-
configs/am43xx_hs_evm_defconfig | 2 +-
8 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 0bf8c17..f3910c2 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -62,7 +62,7 @@
#define BOOT_DEVICE_CPGMAC 0x47
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
-#ifdef CONFIG_SPL_USB_SUPPORT
+#ifdef CONFIG_SPL_USB_STORAGE
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB
#else
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index 2db1922..c8b8ac6 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -93,7 +93,7 @@ void save_omap_boot_params(void)
sys_boot_device = 1;
break;
#endif
-#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)
+#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
case BOOT_DEVICE_USB:
sys_boot_device = 1;
break;
diff --git a/common/Makefile b/common/Makefile
index ad390d0..8c92feb 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -75,8 +75,9 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
ifdef CONFIG_SPL_USB_HOST_SUPPORT
-obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
-obj-$(CONFIG_USB_STORAGE) += usb_storage.o
+obj-y += usb.o
+obj-y += usb_hub.o
+obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
else
obj-$(CONFIG_USB_MUSB_HOST) += usb.o
endif
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 54b0dc3..8b0627e 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -766,9 +766,9 @@ config SPL_USB_HOST_SUPPORT
device can be attached. This option enables the drivers in
drivers/usb/host as part of an SPL build.
-config SPL_USB_SUPPORT
+config SPL_USB_STORAGE
bool "Support loading from USB"
- depends on SPL_USB_HOST_SUPPORT
+ depends on SPL_USB_HOST_SUPPORT && !(BLK && !DM_USB)
help
Enable support for USB devices in SPL. This allows use of USB
devices such as hard drives and flash drivers for loading U-Boot.
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 6f8d759..a3980ce 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
-obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
+obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
diff --git a/common/spl/spl_usb.c b/common/spl/spl_usb.c
index c8d8231..e29d579 100644
--- a/common/spl/spl_usb.c
+++ b/common/spl/spl_usb.c
@@ -15,9 +15,7 @@
#include <usb.h>
#include <fat.h>
-#ifdef CONFIG_USB_STORAGE
static int usb_stor_curr_dev = -1; /* current device */
-#endif
static int spl_usb_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
@@ -34,13 +32,11 @@ static int spl_usb_load_image(struct spl_image_info *spl_image,
return err;
}
-#ifdef CONFIG_USB_STORAGE
/* try to recognize storage devices immediately */
usb_stor_curr_dev = usb_stor_scan(1);
stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, usb_stor_curr_dev);
if (!stor_dev)
return -ENODEV;
-#endif
debug("boot mode - FAT\n");
diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig
index 5131f19..5bd919b 100644
--- a/configs/am43xx_evm_usbhost_boot_defconfig
+++ b/configs/am43xx_evm_usbhost_boot_defconfig
@@ -14,7 +14,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x00100000
CONFIG_CMD_SPL_WRITE_SIZE=0x40000
diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
index 99e4ccb..c01fda9 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -24,7 +24,7 @@ CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_USB_STORAGE=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_ETHER=y
# CONFIG_CMD_FLASH is not set
--
2.7.4
More information about the U-Boot
mailing list