[U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Lukasz Majewski
lukma at denx.de
Sat Feb 2 21:47:29 UTC 2019
On Fri, 1 Feb 2019 16:40:08 +0000
Abel Vesa <abel.vesa at nxp.com> wrote:
> Do the regulator related work only if the build has the DM_REGULATOR.
>
Yes, this part was missing for IMX6Q - especially SPL can get away with
enabling SPL_DM_REGULATOR if needed.
Reviewed-by: Lukasz Majewski <lukma at denx.de>
> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> Reviewed-by: Peng Fan <peng.fan at nxp.com>
> ---
> drivers/usb/host/ehci-mx6.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
> index 1acf08d..9483947 100644
> --- a/drivers/usb/host/ehci-mx6.c
> +++ b/drivers/usb/host/ehci-mx6.c
> @@ -404,6 +404,7 @@ static int mx6_init_after_reset(struct ehci_ctrl
> *dev) if (ret)
> return ret;
>
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> if (priv->vbus_supply) {
> ret = regulator_set_enable(priv->vbus_supply,
> (type ==
> USB_INIT_DEVICE) ? @@ -413,6 +414,7 @@ static int
> mx6_init_after_reset(struct ehci_ctrl *dev) return ret;
> }
> }
> +#endif
>
> if (type == USB_INIT_DEVICE)
> return 0;
> @@ -514,15 +516,17 @@ static int ehci_usb_probe(struct udevice *dev)
> priv->portnr = dev->seq;
> priv->init_type = type;
>
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> ret = device_get_supply_regulator(dev, "vbus-supply",
> &priv->vbus_supply);
> if (ret)
> debug("%s: No vbus supply\n", dev->name);
> -
> +#endif
> ret = ehci_mx6_common_init(ehci, priv->portnr);
> if (ret)
> return ret;
>
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> if (priv->vbus_supply) {
> ret = regulator_set_enable(priv->vbus_supply,
> (type ==
> USB_INIT_DEVICE) ? @@ -532,6 +536,7 @@ static int
> ehci_usb_probe(struct udevice *dev) return ret;
> }
> }
> +#endif
>
> if (priv->init_type == USB_INIT_HOST) {
> setbits_le32(&ehci->usbmode, CM_HOST);
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190202/586863e1/attachment.sig>
More information about the U-Boot
mailing list