[U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset

Simon Goldschmidt simon.k.r.goldschmidt at gmail.com
Thu Feb 21 21:43:32 UTC 2019


This commit removes ad-hoc reset handling for peripheral resets from SPL
for socfpga gen5.

This is done because as U-Boot drivers support reset handling by now.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---

Changes in v2:
- removed Kconfig option OLD_SOCFPGA_KERNEL_COMPAT since compatibility
  now uses an environment variable

 arch/arm/mach-socfpga/misc_gen5.c | 10 ----------
 arch/arm/mach-socfpga/spl_gen5.c  | 10 ----------
 2 files changed, 20 deletions(-)

diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c
index 6e11ba6cb2..9865f5b5b1 100644
--- a/arch/arm/mach-socfpga/misc_gen5.c
+++ b/arch/arm/mach-socfpga/misc_gen5.c
@@ -201,16 +201,6 @@ int arch_early_init_r(void)
 	/* Add device descriptor to FPGA device table */
 	socfpga_fpga_add(&altera_fpga[0]);
 
-#ifdef CONFIG_DESIGNWARE_SPI
-	/* Get Designware SPI controller out of reset */
-	socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
-	socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
-#endif
-
-#ifdef CONFIG_NAND_DENALI
-	socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
-#endif
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-socfpga/spl_gen5.c b/arch/arm/mach-socfpga/spl_gen5.c
index 1bff8cbfcf..e1e65261eb 100644
--- a/arch/arm/mach-socfpga/spl_gen5.c
+++ b/arch/arm/mach-socfpga/spl_gen5.c
@@ -36,16 +36,12 @@ u32 spl_boot_device(void)
 		return BOOT_DEVICE_RAM;
 	case 0x2:	/* NAND Flash (1.8V) */
 	case 0x3:	/* NAND Flash (3.0V) */
-		socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
 		return BOOT_DEVICE_NAND;
 	case 0x4:	/* SD/MMC External Transceiver (1.8V) */
 	case 0x5:	/* SD/MMC Internal Transceiver (3.0V) */
-		socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
-		socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
 		return BOOT_DEVICE_MMC1;
 	case 0x6:	/* QSPI Flash (1.8V) */
 	case 0x7:	/* QSPI Flash (3.0V) */
-		socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
 		return BOOT_DEVICE_SPI;
 	default:
 		printf("Invalid boot device (bsel=%08x)!\n", bsel);
@@ -99,9 +95,7 @@ void board_init_f(ulong dummy)
 		socfpga_bridges_reset(1);
 	}
 
-	socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
 	socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0);
-
 	timer_init();
 
 	debug("Reconfigure Clock Manager\n");
@@ -123,10 +117,6 @@ void board_init_f(ulong dummy)
 	sysmgr_pinmux_init();
 	sysmgr_config_warmrstcfgio(0);
 
-	/* De-assert reset for peripherals and bridges based on handoff */
-	reset_deassert_peripherals_handoff();
-	socfpga_bridges_reset(0);
-
 	debug("Unfreezing/Thaw all I/O banks\n");
 	/* unfreeze / thaw all IO banks */
 	sys_mgr_frzctrl_thaw_req();
-- 
2.17.1



More information about the U-Boot mailing list