[U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
tien.fong.chee at intel.com
Thu Feb 14 17:30:49 UTC 2019
On Thu, 2019-02-14 at 17:27 +0100, Marek Vasut wrote:
> On 2/14/19 4:37 PM, Chee, Tien Fong wrote:
> >
> > On Thu, 2019-02-14 at 16:21 +0100, Marek Vasut wrote:
> > >
> > > On 2/14/19 4:15 PM, Chee, Tien Fong wrote:
> > > >
> > > >
> > > > On Thu, 2019-02-14 at 13:28 +0100, Marek Vasut wrote:
> > > > >
> > > > >
> > > > > On 2/14/19 12:38 PM, Chee, Tien Fong wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Thu, 2019-02-14 at 11:42 +0100, Marek Vasut wrote:
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 2/14/19 7:50 AM, Chee, Tien Fong wrote:
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On Wed, 2019-02-13 at 17:25 +0100, Marek Vasut wrote:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On 2/13/19 3:18 PM, tien.fong.chee at intel.com wrote:
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > > > > > > >
> > > > > > > > > > Add support for loading FPGA bitstream to get DDR
> > > > > > > > > > up
> > > > > > > > > > running
> > > > > > > > > > before
> > > > > > > > > > U-Boot is loaded into DDR. Boot device
> > > > > > > > > > initialization,
> > > > > > > > > > generic
> > > > > > > > > > firmware
> > > > > > > > > > loader and SPL FAT support are required for this
> > > > > > > > > > whole
> > > > > > > > > > mechanism to
> > > > > > > > > > work.
> > > > > > > > > >
> > > > > > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel
> > > > > > > > > > .com
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > ---
> > > > > > > > > >
> > > > > > > > > > changes for v7
> > > > > > > > > > - Removed casting for get_fpga_filename
> > > > > > > > > > - Removed hard coding DDR address for loading core
> > > > > > > > > > bistream,
> > > > > > > > > > using
> > > > > > > > > > loadable
> > > > > > > > > > property from FIT.
> > > > > > > > > > - Added checking for config_pins, return if error.
> > > > > > > > > > ---
> > > > > > > > > > arch/arm/mach-socfpga/spl_a10.c | 41
> > > > > > > > > > ++++++++++++++++++++++++++++++++++++++++-
> > > > > > > > > > 1 file changed, 40 insertions(+), 1 deletion(-)
> > > > > > > > > >
> > > > > > > > > > diff --git a/arch/arm/mach-socfpga/spl_a10.c
> > > > > > > > > > b/arch/arm/mach-
> > > > > > > > > > socfpga/spl_a10.c
> > > > > > > > > > index c97eacb..36003b1 100644
> > > > > > > > > > --- a/arch/arm/mach-socfpga/spl_a10.c
> > > > > > > > > > +++ b/arch/arm/mach-socfpga/spl_a10.c
> > > > > > > > > > @@ -1,6 +1,6 @@
> > > > > > > > > > // SPDX-License-Identifier: GPL-2.0+
> > > > > > > > > > /*
> > > > > > > > > > - * Copyright (C) 2012 Altera Corporation <www.alt
> > > > > > > > > > era.
> > > > > > > > > > com>
> > > > > > > > > > + * Copyright (C) 2012-2019 Altera Corporation <ww
> > > > > > > > > > w.al
> > > > > > > > > > tera
> > > > > > > > > > .com
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > */
> > > > > > > > > >
> > > > > > > > > > #include <common.h>
> > > > > > > > > > @@ -23,6 +23,8 @@
> > > > > > > > > > #include <fdtdec.h>
> > > > > > > > > > #include <watchdog.h>
> > > > > > > > > > #include <asm/arch/pinmux.h>
> > > > > > > > > > +#include <asm/arch/fpga_manager.h>
> > > > > > > > > > +#include <mmc.h>
> > > > > > > > > >
> > > > > > > > > > DECLARE_GLOBAL_DATA_PTR;
> > > > > > > > > >
> > > > > > > > > > @@ -68,11 +70,48 @@ u32 spl_boot_mode(const u32
> > > > > > > > > > boot_device)
> > > > > > > > > >
> > > > > > > > > > void spl_board_init(void)
> > > > > > > > > > {
> > > > > > > > > > + char buf[16 * 1024]
> > > > > > > > > > __aligned(ARCH_DMA_MINALIGN);
> > > > > > > > > ALLOC_CACHE_ALIGN_BUFFER()
> > > > > > > > #define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_S
> > > > > > > > IZE
> > > > > > > > They are not same thing?
> > > > > > > See include/memalign.h and other drivers, the macro is
> > > > > > > preferred
> > > > > > > as
> > > > > > > it
> > > > > > > hides the details.
> > > > > > Okay.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > +
> > > > > > > > > > /* enable console uart printing */
> > > > > > > > > > preloader_console_init();
> > > > > > > > > > WATCHDOG_RESET();
> > > > > > > > > >
> > > > > > > > > > arch_early_init_r();
> > > > > > > > > > +
> > > > > > > > > > + /* If the full FPGA is already loaded,
> > > > > > > > > > ie.from
> > > > > > > > > > EPCQ,
> > > > > > > > > > config fpga pins */
> > > > > > > > > > + if (is_fpgamgr_user_mode()) {
> > > > > > > > > > + int ret = config_pins(gd-
> > > > > > > > > > >fdt_blob,
> > > > > > > > > > "shared");
> > > > > > > > > > +
> > > > > > > > > > + if (ret)
> > > > > > > > > > + return;
> > > > > > > > > > +
> > > > > > > > > > + ret = config_pins(gd->fdt_blob,
> > > > > > > > > > "fpga");
> > > > > > > > > > + if (ret)
> > > > > > > > > > + return;
> > > > > > > > > > + } else if (!is_fpgamgr_early_user_mode())
> > > > > > > > > > {
> > > > > > > > > > + /* Program IOSSM(early IO release)
> > > > > > > > > > or
> > > > > > > > > > full
> > > > > > > > > > FPGA */
> > > > > > > > > > + fpga_fs_info fpga_fsinfo;
> > > > > > > > > > + int len;
> > > > > > > > > > +
> > > > > > > > > > + fpga_fsinfo.filename =
> > > > > > > > > > get_fpga_filename(gd-
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > fdt_blob, &len);
> > > > > > > > > > +
> > > > > > > > > > + if (fpga_fsinfo.filename)
> > > > > > > > > > + socfpga_loadfs(&fpga_fsinf
> > > > > > > > > > o,
> > > > > > > > > > buf,
> > > > > > > > > > sizeof(buf), 0);
> > > > > > > > > Why is this code here twice ? The same code seems to
> > > > > > > > > be
> > > > > > > > > below
> > > > > > > > > ...
> > > > > > > > The 1st calling for periph program, then running ddr
> > > > > > > > calibration,
> > > > > > > > then
> > > > > > > > 2nd calling for core program.
> > > > > > > Then maybe the code can be deduplicated ?
> > > > > > Hmm...seems cannot, because
> > > > > > 1. DDR calibration is not part of fpga code.
> > > > > > 2. fpga driver can only be used to process one bistream at
> > > > > > a
> > > > > > time,
> > > > > > because different mode has different handling.
> > > > > + } else if (!is_fpgamgr_early_user_mode()) {
> > > > > + /* Program IOSSM(early IO release) or full
> > > > > FPGA
> > > > > */
> > > > > + fpga_fs_info fpga_fsinfo;
> > > > > + int len;
> > > > > +
> > > > > + fpga_fsinfo.filename = get_fpga_filename(gd-
> > > > > >
> > > > > >
> > > > > > fdt_blob, &len);
> > > > > +
> > > > > + if (fpga_fsinfo.filename)
> > > > > + socfpga_loadfs(&fpga_fsinfo, buf,
> > > > > sizeof(buf), 0);
> > > > > ...
> > > > > + if (!is_fpgamgr_user_mode()) {
> > > > > + fpga_fs_info fpga_fsinfo;
> > > > > + int len;
> > > > > +
> > > > > + fpga_fsinfo.filename = get_fpga_filename(gd-
> > > > > >
> > > > > >
> > > > > > fdt_blob, &len);
> > > > > +
> > > > > + if (fpga_fsinfo.filename)
> > > > > + socfpga_loadfs(&fpga_fsinfo, buf,
> > > > > sizeof(buf), 0);
> > > > >
> > > > > These two chunks look the same to me , no ?
> > > > Yes, they are being called twice at different fpga mode, and
> > > > different
> > > > sequence, before and after DDR calibration.
> > > So why can't these two chunks of code be de-duplicated ?
> > de-duplicated means calling for one time only?
> > If that's the case, how de-deplicated? One call for processing one
> > bistream, and this driver has different handling for different FPGA
> > mode and different sequence(before and after DDR calibration).
> I mean, make the two copies of code a single function and call that
> function twice.
Okay, i got you.
>
More information about the U-Boot
mailing list