[U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Auer, Lukas
lukas.auer at aisec.fraunhofer.de
Mon Feb 18 16:04:24 UTC 2019
On Mon, 2019-02-18 at 18:46 +0530, Anup Patel wrote:
> On Mon, Feb 18, 2019 at 5:11 PM Auer, Lukas
> <lukas.auer at aisec.fraunhofer.de> wrote:
> > On Mon, 2019-02-18 at 10:01 +0000, Auer, Lukas wrote:
> > > On Mon, 2019-02-18 at 10:28 +0530, Anup Patel wrote:
> > > > On Tue, Feb 12, 2019 at 3:44 AM Lukas Auer
> > > > <lukas.auer at aisec.fraunhofer.de> wrote:
> > > > > Harts on RISC-V boot independently and U-Boot is responsible
> > > > > for
> > > > > managing them. Functions are called on other harts with
> > > > > smp_call_function(), which sends inter-processor interrupts
> > > > > (IPIs)
> > > > > to
> > > > > all other harts. Functions are specified with their address
> > > > > and
> > > > > two
> > > > > function arguments (argument 2 and 3). The first function
> > > > > argument
> > > > > is
> > > > > always the hart ID of the hart calling the function. On the
> > > > > other
> > > > > harts,
> > > > > the IPI interrupt handler handle_ipi() must be called on
> > > > > software
> > > > > interrupts to handle the request and call the specified
> > > > > function.
> > > > >
> > > > > Functions are stored in the ipi_data data structure. Every
> > > > > hart
> > > > > has
> > > > > its
> > > > > own data structure in global data. While this is not required
> > > > > at
> > > > > the
> > > > > moment (all harts are expected to boot Linux), this does
> > > > > allow
> > > > > future
> > > > > expansion, where other harts may be used for monitoring or
> > > > > other
> > > > > tasks.
> > > > >
> > > > > Signed-off-by: Lukas Auer <lukas.auer at aisec.fraunhofer.de>
> > > > > ---
> > > > >
> > > > > arch/riscv/Kconfig | 19 +++++
> > > > > arch/riscv/include/asm/global_data.h | 5 ++
> > > > > arch/riscv/include/asm/smp.h | 53 +++++++++++++
> > > > > arch/riscv/lib/Makefile | 1 +
> > > > > arch/riscv/lib/smp.c | 110
> > > > > +++++++++++++++++++++++++++
> > > > > 5 files changed, 188 insertions(+)
> > > > > create mode 100644 arch/riscv/include/asm/smp.h
> > > > > create mode 100644 arch/riscv/lib/smp.c
> > > > >
> > > > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > > > > index c45e4d73a8..c0842178dd 100644
> > > > > --- a/arch/riscv/Kconfig
> > > > > +++ b/arch/riscv/Kconfig
> > > > > @@ -116,4 +116,23 @@ config RISCV_RDTIME
> > > > > config SYS_MALLOC_F_LEN
> > > > > default 0x1000
> > > > >
> > > > > +config SMP
> > > > > + bool "Symmetric Multi-Processing"
> > > > > + help
> > > > > + This enables support for systems with more than one
> > > > > CPU.
> > > > > If
> > > > > + you say N here, U-Boot will run on single and
> > > > > multiprocessor
> > > > > + machines, but will use only one CPU of a
> > > > > multiprocessor
> > > > > + machine. If you say Y here, U-Boot will run on
> > > > > many,
> > > > > but
> > > > > not
> > > > > + all, single processor machines.
> > > > > +
> > > > > +config NR_CPUS
> > > > > + int "Maximum number of CPUs (2-32)"
> > > > > + range 2 32
> > > > > + depends on SMP
> > > > > + default "8"
> > > > > + help
> > > > > + On multiprocessor machines, U-Boot sets up a stack
> > > > > for
> > > > > each CPU.
> > > > > + Stack memory is pre-allocated. U-Boot must
> > > > > therefore
> > > > > know
> > > > > the
> > > > > + maximum number of CPUs that may be present.
> > > > > +
> > > > > endmenu
> > > > > diff --git a/arch/riscv/include/asm/global_data.h
> > > > > b/arch/riscv/include/asm/global_data.h
> > > > > index a3a342c6e1..23a5f35af5 100644
> > > > > --- a/arch/riscv/include/asm/global_data.h
> > > > > +++ b/arch/riscv/include/asm/global_data.h
> > > > > @@ -10,12 +10,17 @@
> > > > > #ifndef __ASM_GBL_DATA_H
> > > > > #define __ASM_GBL_DATA_H
> > > > >
> > > > > +#include <asm/smp.h>
> > > > > +
> > > > > /* Architecture-specific global data */
> > > > > struct arch_global_data {
> > > > > long boot_hart; /* boot hart id */
> > > > > #ifdef CONFIG_SIFIVE_CLINT
> > > > > void __iomem *clint; /* clint base address */
> > > > > #endif
> > > > > +#ifdef CONFIG_SMP
> > > > > + struct ipi_data ipi[CONFIG_NR_CPUS];
> > > >
> > > > The data passed by "main HART" via global data to other HARTs
> > > > is not visible reliably and randomly few HARTs fail to enter
> > > > Linux
> > > > kernel on my board. I am suspecting per-HART "ipi" data in
> > > > global
> > > > data not being cache-line aligned as the cause of behavior but
> > > > there
> > > > could be other issue too.
> > > >
> > > > I have a hack which works reliable for me. As-per this hack, we
> > > > add
> > > > "mdelay(10)" just before calling riscv_send_ipi() in
> > > > send_ipi_many().
> > > > This hack helped me conclude that there is some sync issue in
> > > > per-
> > > > HART
> > > > "ipi" data.
> > > >
> > > > The above issue is not seen on QEMU so we are fine there.
> > > >
> > > > I would suggest to make per-HART "ipi" data cache-line aligned
> > > > (just like Linux kernel).
> > > >
> > >
> > > Interesting, this is definitely a memory coherency issue,
> > > probably
> > > inadequate fences. I am not sure if making the ipi data structure
> > > cache-line aligned will reliably fix it. I'll try to replicate
> > > the
> > > issue and get it fixed. Thanks for reporting it!
> > >
> >
> > Not sure if it is connected, but I have noticed a regression with
> > the
> > current OpenSBI. Testing U-Boot with the SMP patches applied on
> > QEMU
> > with 4 harts, hart 4 will not receive software interrupts. I have
> > bisected the issue to the following commit.
> >
> > 918c1354b75c74b62f67c4e929551d643f035443 is the first bad commit
> > commit 918c1354b75c74b62f67c4e929551d643f035443
> > Author: Nick Kossifidis <mickflemm at gmail.com>
> > Date: Sun Feb 17 09:00:20 2019 +0200
> >
> > lib: Improve delivery of SBI_IPI_EVENT_HALT
> >
> > When sbi_ipi_send_many gets called with the current hartid
> > included on pmask (or when pmask is NULL), and we send
> > a HALT event, since the for loop works sequentially over
> > all hartids on the mask, we may send a HALT event to the
> > current hart before the loop finishes. So we will halt
> > the current hart before it can deliver a HALT IPI to the
> > rest and some harts will remain active.
> >
> > Make sure we send an IPI to the current hart after we've
> > finished with everybody else.
> >
> > Signed-off-by: Nick Kossifidis <mick at ics.forth.gr>
> >
>
> No issue. Already fixed it with following commit:
>
> lib: Fix mask shift in sbi_ipi_send_many()
>
> The mask shift in for-loop of sbi_ipi_send_many() is
> broken with commit 918c135
> ("lib: Improve delivery of SBI_IPI_EVENT_HALT")
>
> This patch fix it.
>
> Signed-off-by: Anup Patel <anup.patel at wdc.com>
>
>
> Please pull latest OpenSBI repo.
>
Thanks, that fixed it.
Lukas
More information about the U-Boot
mailing list