[U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size

[Ashish Kumar]

> -----Original Message-----
> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Meenakshi
> Aggarwal
> Sent: Wednesday, February 20, 2019 3:36 PM
> To: u-boot at lists.denx.de
> Subject: [U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size
Ashish: Rephrase to "Reduce MC memory size to 128M" from the above it sound like system DDR is 128MB

Regards
Ashish 
> 
> ls2088, ls1088 : minimum DDR size for MC is 128 MB
> lx2 : minimum DDR size for MC is 256 MB
> 
> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> ---
>  drivers/net/fsl-mc/mc.c          | 23 +++++++++++++++++++----
>  include/configs/ls1088a_common.h |  2 +-  include/configs/ls2080a_common.h
> |  2 +-  include/configs/lx2160a_common.h |  2 +-
>  4 files changed, 22 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index
> d0b8c03..7ba44cd 100644
> --- a/drivers/net/fsl-mc/mc.c
> +++ b/drivers/net/fsl-mc/mc.c
> @@ -28,6 +28,7 @@
>  #define MC_MEM_SIZE_ENV_VAR	"mcmemsize"
>  #define MC_BOOT_TIMEOUT_ENV_VAR	"mcboottimeout"
>  #define MC_BOOT_ENV_VAR		"mcinitcmd"
> +#define MC_DRAM_BLOCK_DEFAULT_SIZE (512UL * 1024 * 1024)
> 
>  DECLARE_GLOBAL_DATA_PTR;
>  static int mc_memset_resv_ram;
> @@ -683,7 +684,8 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
>  	size_t mc_ram_size = mc_get_dram_block_size();
> 
>  	mc_ram_num_256mb_blocks = mc_ram_size /
> MC_RAM_SIZE_ALIGNMENT;
> -	if (mc_ram_num_256mb_blocks < 1 || mc_ram_num_256mb_blocks >
> 0xff) {
> +
> +	if (mc_ram_num_256mb_blocks >= 0xff) {
>  		error = -EINVAL;
>  		printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n",
>  		       mc_ram_size);
> @@ -691,6 +693,13 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
>  	}
> 
>  	/*
> +	 * To support 128 MB DDR Size for MC
> +	 */
> +	if (mc_ram_num_256mb_blocks == 0) {
> +		mc_ram_num_256mb_blocks = 0xFF;
> +	}
> +
> +	/*
>  	 * Management Complex cores should be held at reset out of POR.
>  	 * U-Boot should be the first software to touch MC. To be safe,
>  	 * we reset all cores again by setting GCR1 to 0. It doesn't do @@ -730,8
> +739,14 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
>  	/*
>  	 * Tell MC what is the address range of the DRAM block assigned to it:
>  	 */
> -	reg_mcfbalr = (u32)mc_ram_addr |
> -		      (mc_ram_num_256mb_blocks - 1);
> +	if (mc_ram_num_256mb_blocks < 0xFF) {
> +		reg_mcfbalr = (u32)mc_ram_addr |
> +				(mc_ram_num_256mb_blocks - 1);
> +	} else {
> +		reg_mcfbalr = (u32)mc_ram_addr |
> +				(mc_ram_num_256mb_blocks);
> +	}
> +
>  	out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr);
>  	out_le32(&mc_ccsr_regs->reg_mcfbahr,
>  		 (u32)(mc_ram_addr >> 32));
> @@ -876,7 +891,7 @@ unsigned long mc_get_dram_block_size(void)
>  			       "\' environment variable: %lu\n",
>  			       dram_block_size);
> 
> -			dram_block_size =
> CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE;
> +			dram_block_size = MC_DRAM_BLOCK_DEFAULT_SIZE;
>  		}
>  	}
> 
> diff --git a/include/configs/ls1088a_common.h
> b/include/configs/ls1088a_common.h
> index 89133c2..1509292 100644
> --- a/include/configs/ls1088a_common.h
> +++ b/include/configs/ls1088a_common.h
> @@ -154,7 +154,7 @@ unsigned long long get_qixis_addr(void);
>   */
> 
>  #if defined(CONFIG_FSL_MC_ENET)
> -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(512UL *
> 1024 * 1024)
> +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(128UL *
> 1024 * 1024)
>  #endif
>  /* Command line configuration */
>  #define CONFIG_CMD_CACHE
> diff --git a/include/configs/ls2080a_common.h
> b/include/configs/ls2080a_common.h
> index ab38981..7c1d35b 100644
> --- a/include/configs/ls2080a_common.h
> +++ b/include/configs/ls2080a_common.h
> @@ -159,7 +159,7 @@ unsigned long long get_qixis_addr(void);
>   * 512MB aligned, so the min size to hide is 512MB.
>   */
>  #ifdef CONFIG_FSL_MC_ENET
> -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(512UL *
> 1024 * 1024)
> +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(128UL *
> 1024 * 1024)
>  #endif
> 
>  /* Command line configuration */
> diff --git a/include/configs/lx2160a_common.h
> b/include/configs/lx2160a_common.h
> index 0f1a621..c4bbe96 100644
> --- a/include/configs/lx2160a_common.h
> +++ b/include/configs/lx2160a_common.h
> @@ -102,7 +102,7 @@
>   * 512MB aligned, so the min size to hide is 512MB.
>   */
>  #ifdef CONFIG_FSL_MC_ENET
> -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE	(512UL * 1024 *
> 1024)
> +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE	(256UL * 1024 *
> 1024)
>  #endif
> 
>  /* I2C bus multiplexer */
> --
> 1.9.1
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.de
> nx.de%2Flistinfo%2Fu-
> boot&data=02%7C01%7CAshish.Kumar%40nxp.com%7C47b95d2e68d34
> 362e1cc08d696ead9c9%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0
> %7C636862332767130806&sdata=nqugF6OMxgjPXOW5kpQemHRWAgo
> zVGwMndpxztNqDgE%3D&reserved=0