[U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL

[Abel Vesa]

This matches one of the following three boards (or fails):
 - imx6q-sabresd
 - imx6qp-sabresd
 - imx6dl-sabresd

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
 board/freescale/mx6sabresd/mx6sabresd.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 0183ede..4688095 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -1062,3 +1062,21 @@ void board_init_f(ulong dummy)
 	board_init_r(NULL, 0);
 }
 #endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	if (is_mx6dq()) {
+		if (!strcmp(name, "imx6q-sabresd"))
+			return 0;
+	} else if (is_mx6dqp()) {
+		if (!strcmp(name, "imx6qp-sabresd"))
+			return 0;
+	} else if (is_mx6dl()) {
+		if (!strcmp(name, "imx6dl-sabresd"))
+			return 0;
+	}
+
+	return -1;
+}
+#endif
-- 
2.7.4