[U-Boot] [PATCH] ARM: mvebu: x530: use MV_DDR_FREQ_SAR

Chris Packham judge.packham at gmail.com
Mon Feb 11 01:19:56 UTC 2019


MV_DDR_FREQ_SAR lets the DDR frequency be determined by hardware
strapping. This also has the side effect of running the DDR clock in
synchronous mode with the CPU core clock rather than from an independent
PLL. We've seen this improve reliability in operation across a number of
boards and temperature ranges.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

 board/alliedtelesis/x530/x530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/alliedtelesis/x530/x530.c b/board/alliedtelesis/x530/x530.c
index b34ae5134547..d7d1942fe686 100644
--- a/board/alliedtelesis/x530/x530.c
+++ b/board/alliedtelesis/x530/x530.c
@@ -57,7 +57,7 @@ static struct mv_ddr_topology_map board_topology_map = {
 	    SPEED_BIN_DDR_1866M,	/* speed_bin */
 	    MV_DDR_DEV_WIDTH_16BIT,	/* sdram device width */
 	    MV_DDR_DIE_CAP_4GBIT,	/* die capacity */
-	    MV_DDR_FREQ_933,		/* frequency */
+	    MV_DDR_FREQ_SAR,		/* frequency */
 	    0, 0,			/* cas_l cas_wl */
 	    MV_DDR_TEMP_LOW,		/* temperature */
 	    MV_DDR_TIM_2T} },		/* timing */
-- 
2.20.1



More information about the U-Boot mailing list