[U-Boot] [PATCH] warp7: README: Adjust the binary name after DM conversion

[Fabio Estevam]

After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
 board/warp7/README | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/warp7/README b/board/warp7/README
index 60339da543..dcad61fd3d 100644
--- a/board/warp7/README
+++ b/board/warp7/README
@@ -48,7 +48,7 @@ Run the DFU command:
 
 Transfer u-boot.imx that will be flashed into the eMMC:
 
-$ sudo dfu-util -D u-boot.imx -a boot
+$ sudo dfu-util -D u-boot-dtb.imx -a boot
 
 Then on the U-Boot prompt the following message should be seen after a
 successful upgrade:
-- 
2.17.1