[U-Boot] [PATCH 2/2] configs: sama5d27_som1_ek: Activate misc init for uSD variant

[Alexander Dahl]

This was already set for 'sama5d27_som1_ek_mmc_defconfig' (first SD
card, full size). Without this option set, the MAC address is not read
from the I²C EEPROM at boot, and remains unset:

    U-Boot 2019.01 (Jan 01 2019 - 00:00:00 +0000)

    CPU: SAMA5D27 1G bits DDR2 SDRAM
    Crystal frequency:       24 MHz
    CPU clock        :      492 MHz
    Master clock     :      164 MHz
    DRAM:  128 MiB
    MMC:   sdio-host at a0000000: 0, sdio-host at b0000000: 1
    Loading Environment from FAT... OK
    In:    serial
    Out:   serial
    Err:   serial
    Net:
    Error: ethernet at f8008000 address not set.
    eth-1: ethernet at f8008000
    Hit any key to stop autoboot:  0

Signed-off-by: Alexander Dahl <ada at thorsis.com>
---
 configs/sama5d27_som1_ek_mmc1_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/sama5d27_som1_ek_mmc1_defconfig b/configs/sama5d27_som1_ek_mmc1_defconfig
index 5f4abe8605..9ba8d79e31 100644
--- a/configs/sama5d27_som1_ek_mmc1_defconfig
+++ b/configs/sama5d27_som1_ek_mmc1_defconfig
@@ -23,6 +23,7 @@ CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait"
+CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_HUSH_PARSER=y
-- 
2.11.0