[U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
festevam at gmail.com
Sat Feb 16 14:42:01 UTC 2019
Hi Joris,
On Sat, Feb 16, 2019 at 12:38 PM Joris Offouga <offougajoris at gmail.com> wrote:
> By doing this the SPL still does not find the U-Boot binary always this
> same log:
>
> U-Boot SPL 2019.04-rc1-00142-g7fe4b77-dirty (Feb 16 2019 - 13:58:30
> +0100)
> Trying to boot from MMC1
Yes, just tried it and I saw the same here.
I started from scratch and used top of tree U-Boot.
When I load it via USB I see a hang:
CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
CPU: Commercial temperature grade (0C to 95C) at 50C
Reset cause: POR
Board: i.MX7D PICOSOM
I2C: ready
DRAM: 512 MiB
...
So this is a regression and I will try to bisect it.
More information about the U-Boot
mailing list