[U-Boot] [PATCH 1/3] arm: mvebu: mcbin: dts: fix PCIe reset polarity

[Stefan Roese]

On 03.02.19 14:15, Baruch Siach wrote:
> The PCIe slot PERST signal is active low. Fix the gpio signal
> description in the dts.
> 
> This happened to work because the pcie_dw_mvebu driver sets the reset
> gpio level to 1 (high) to release the reset. The following commit will
> fix that.
> 
> Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> ---
>   arch/arm/dts/armada-8040-mcbin.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts
> index 7e8e2f707ccf..5a046d9de474 100644
> --- a/arch/arm/dts/armada-8040-mcbin.dts
> +++ b/arch/arm/dts/armada-8040-mcbin.dts
> @@ -132,7 +132,7 @@
>   	num-lanes = <4>;
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&cpm_pcie_reset_pins>;
> -	marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_HIGH>; /* GPIO[52] */
> +	marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */
>   	status = "okay";
>   };
>   
> 

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan