[U-Boot] [PATCH 0/7] Add netcp networking support on K2G ICE EVM

[Murali Karicheri]

Hi,

On 02/11/2019 12:20 PM, Murali Karicheri wrote:
> - Resending this as I was not subscribed to u-boot mailing
>    list when the initial patch series was sent. Sorry for the
>    trouble.
> 
> This patch series add networking capability to K2G ICE EVM
> based on netcp driver. Networking function has been tested
> using the latest master branch from u-boot repo. Following
> boot mode has been tested for networking.
> 
> Net boot (tftp images over ethernet interface and boot kernel)
>            log at https://pastebin.ubuntu.com/p/b3nyCXPhWc/
> MMC boot: (load images from boot folder of rootfs and boot kernel)
>            log at https://pastebin.ubuntu.com/p/FWycmKd9KB/
> 
> Used Linux upstream linux kernel version 4.19.9 for the tests.
> 
> Please review and apply if this looks good.
> 
A gentle reminder to review and apply.

Thanks and regards,

Murali
> Thanks
> 
> Murali Karicheri (7):
>    ARM: k2g-ice: Add pinmux support for rgmii interface
>    ARM: k2g-gp-evm: update to rgmii pinmux configuration
>    net: netcp: add support for phy with rgmii ids
>    ARM: k2g: add a workaround to reset the phy
>    k2g: config enable ti phy dp83867 for k2g
>    ARM: dts: k2g-evm: remove unused phy-mode property from phy node
>    ARM: dts: k2g-ice: add dt node for netcp
> 
>   arch/arm/dts/keystone-k2g-evm.dts             |  1 -
>   arch/arm/dts/keystone-k2g-ice.dts             | 35 +++++++++++++
>   .../mach-keystone/include/mach/hardware-k2g.h |  3 ++
>   arch/arm/mach-keystone/include/mach/mux-k2g.h |  5 ++
>   board/ti/ks2_evm/board_k2g.c                  | 15 ++++++
>   board/ti/ks2_evm/mux-k2g.h                    | 51 +++++++++++++------
>   drivers/net/ti/keystone_net.c                 | 22 +++++++-
>   include/configs/k2g_evm.h                     |  1 +
>   8 files changed, 116 insertions(+), 17 deletions(-)
>