[U-Boot] [PATCH 12/14] imx: ventana: add support for GW5901/GW5902
Tim Harvey
tharvey at gateworks.com
Mon Feb 4 21:10:58 UTC 2019
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
board/gateworks/gw_ventana/common.c | 133 ++++++++++++++++++++
board/gateworks/gw_ventana/eeprom.c | 6 +-
board/gateworks/gw_ventana/gw_ventana.c | 6 +
board/gateworks/gw_ventana/ventana_eeprom.h | 2 +
4 files changed, 146 insertions(+), 1 deletion(-)
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index c1e2e8a506..8934f213dd 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -389,6 +389,51 @@ static iomux_v3_cfg_t const gw560x_gpio_pads[] = {
IOMUX_PADS(PAD_DISP0_DAT5__GPIO4_IO26 | DIO_PAD_CFG),
};
+static iomux_v3_cfg_t const gw5901_gpio_pads[] = {
+ /* MX6_LOCLED# */
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+ /* ETH1_EN */
+ IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | DIO_PAD_CFG),
+ /* CAN_STBY */
+ IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
+ /* PCI_RST# */
+ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
+ /* PMIC reset */
+ IOMUX_PADS(PAD_DISP0_DAT8__WDOG1_B | DIO_PAD_CFG),
+ /* COM_CFGA/B/C/D */
+ IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14 | DIO_PAD_CFG),
+ IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15 | DIO_PAD_CFG),
+ IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16 | DIO_PAD_CFG),
+ IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
+ /* ETI_IRQ# */
+ IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | DIO_PAD_CFG),
+ /* DIO_IRQ# */
+ IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
+ /* FIBER_SIGDET */
+ IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG),
+};
+
+static iomux_v3_cfg_t const gw5902_gpio_pads[] = {
+ /* MX6_LOCLED# */
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
+ /* CAN1_STBY */
+ IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
+ /* CAN2_STBY */
+ IOMUX_PADS(PAD_SD3_CLK__GPIO7_IO03 | DIO_PAD_CFG),
+ /* UART1_EN# */
+ IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
+ /* PCI_RST# */
+ IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
+ /* 5V_UVLO */
+ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
+ /* ETI_IRQ# */
+ IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | DIO_PAD_CFG),
+ /* DIO_IRQ# */
+ IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
+ /* USBOTG_PEN */
+ IOMUX_PADS(PAD_EIM_D23__GPIO3_IO23 | DIO_PAD_CFG),
+};
+
static iomux_v3_cfg_t const gw5903_gpio_pads[] = {
/* BKLT_12VEN */
IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | DIO_PAD_CFG),
@@ -741,6 +786,60 @@ struct dio_cfg gw560x_dio[] = {
},
};
+struct dio_cfg gw5901_dio[] = {
+ {
+ { IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14) },
+ IMX_GPIO_NR(5, 14),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15) },
+ IMX_GPIO_NR(5, 15),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16) },
+ IMX_GPIO_NR(5, 16),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17) },
+ IMX_GPIO_NR(5, 17),
+ { 0, 0 },
+ 0
+ },
+};
+
+struct dio_cfg gw5902_dio[] = {
+ {
+ { IOMUX_PADS(PAD_DISP0_DAT20__GPIO5_IO14) },
+ IMX_GPIO_NR(5, 14),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_DISP0_DAT21__GPIO5_IO15) },
+ IMX_GPIO_NR(5, 15),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_DISP0_DAT22__GPIO5_IO16) },
+ IMX_GPIO_NR(5, 16),
+ { 0, 0 },
+ 0
+ },
+ {
+ { IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17) },
+ IMX_GPIO_NR(5, 17),
+ { 0, 0 },
+ 0
+ },
+};
+
struct dio_cfg gw5903_dio[] = {
};
@@ -1041,6 +1140,32 @@ struct ventana gpio_cfg[GW_UNKNOWN] = {
.mmc_cd = IMX_GPIO_NR(7, 0),
},
+ /* GW5901 */
+ {
+ .gpio_pads = gw5901_gpio_pads,
+ .num_pads = ARRAY_SIZE(gw5901_gpio_pads)/2,
+ .dio_cfg = gw5901_dio,
+ .leds = {
+ IMX_GPIO_NR(4, 15),
+ },
+ .pcie_rst = IMX_GPIO_NR(1, 29),
+ .nand = true,
+ },
+
+ /* GW5902 */
+ {
+ .gpio_pads = gw5902_gpio_pads,
+ .num_pads = ARRAY_SIZE(gw5902_gpio_pads)/2,
+ .dio_cfg = gw5902_dio,
+ .leds = {
+ IMX_GPIO_NR(4, 15),
+ },
+ .pcie_rst = IMX_GPIO_NR(1, 0),
+ .rs232_en = GP_RS232_EN,
+ .otgpwr_en = IMX_GPIO_NR(3, 23),
+ .nand = true,
+ },
+
/* GW5903 */
{
.gpio_pads = gw5903_gpio_pads,
@@ -1278,6 +1403,14 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info)
gpio_request(IMX_GPIO_NR(4, 26), "12p0_en");
gpio_direction_output(IMX_GPIO_NR(4, 26), 1);
break;
+ case GW5901:
+ SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 2), "can_stby", 0);
+ break;
+ case GW5902:
+ SETUP_GPIO_OUTPUT(IMX_GPIO_NR(1, 2), "can1_stby", 0);
+ SETUP_GPIO_OUTPUT(IMX_GPIO_NR(7, 3), "can2_stby", 0);
+ SETUP_GPIO_OUTPUT(IMX_GPIO_NR(7, 12), "5P0V_EN", 1);
+ break;
case GW5903:
gpio_request(IMX_GPIO_NR(3, 31) , "usbh1-ehci_pwr");
gpio_direction_output(IMX_GPIO_NR(3, 31), 1);
diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c
index bcd634920c..ee227320c0 100644
--- a/board/gateworks/gw_ventana/eeprom.c
+++ b/board/gateworks/gw_ventana/eeprom.c
@@ -97,7 +97,11 @@ read_eeprom(int bus, struct ventana_board_info *info)
type = GW560x;
break;
case '9':
- if (info->model[4] == '0' && info->model[5] == '3')
+ if (info->model[4] == '0' && info->model[5] == '1')
+ type = GW5901;
+ else if (info->model[4] == '0' && info->model[5] == '2')
+ type = GW5902;
+ else if (info->model[4] == '0' && info->model[5] == '3')
type = GW5903;
else if (info->model[4] == '0' && info->model[5] == '4')
type = GW5904;
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index da9f5d89be..0b2258e87a 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -1313,6 +1313,12 @@ int ft_board_setup(void *blob, bd_t *bd)
if (rev < 'C')
ft_board_wdog_fixup(blob, WDOG1_PATH);
break;
+ case GW5901:
+ case GW5902:
+ /* GW5901/GW5901 revB adds WDOG1_B as an external reset */
+ if (rev < 'B')
+ ft_board_wdog_fixup(blob, WDOG1_PATH);
+ break;
}
/* Configure DIO */
diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index 3e24287fe7..4fa085b320 100644
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -112,6 +112,8 @@ enum {
GW552x,
GW553x,
GW560x,
+ GW5901,
+ GW5902,
GW5903,
GW5904,
GW5905,
--
2.17.1
More information about the U-Boot
mailing list