[U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling
Marek Vasut
marex at denx.de
Thu Feb 21 21:50:57 UTC 2019
On 2/21/19 10:43 PM, Simon Goldschmidt wrote:
> This adds reset handling to the cadence qspi driver.
>
> For backwards compatibility, only a warning is printed when failing to
> get reset handles.
>
> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> ---
>
> Changes in v2:
> - add .remove callback to release the resets
>
> drivers/spi/cadence_qspi.c | 16 ++++++++++++++++
> drivers/spi/cadence_qspi.h | 4 ++++
> 2 files changed, 20 insertions(+)
>
> diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
> index 11fce9c4fe..3bfa0201c4 100644
> --- a/drivers/spi/cadence_qspi.c
> +++ b/drivers/spi/cadence_qspi.c
> @@ -8,6 +8,7 @@
> #include <dm.h>
> #include <fdtdec.h>
> #include <malloc.h>
> +#include <reset.h>
> #include <spi.h>
> #include <linux/errno.h>
> #include "cadence_qspi.h"
> @@ -154,10 +155,17 @@ static int cadence_spi_probe(struct udevice *bus)
> {
> struct cadence_spi_platdata *plat = bus->platdata;
> struct cadence_spi_priv *priv = dev_get_priv(bus);
> + int ret;
>
> priv->regbase = plat->regbase;
> priv->ahbbase = plat->ahbbase;
>
> + ret = reset_get_bulk(bus, &priv->resets);
> + if (ret)
> + dev_warn(bus, "Can't get reset: %d\n", ret);
> + else
> + reset_deassert_bulk(&priv->resets);
> +
> if (!priv->qspi_is_init) {
> cadence_qspi_apb_controller_init(plat);
> priv->qspi_is_init = 1;
> @@ -166,6 +174,13 @@ static int cadence_spi_probe(struct udevice *bus)
> return 0;
> }
>
> +static int cadence_spi_remove(struct udevice *dev)
> +{
> + struct cadence_spi_priv *priv = dev_get_priv(dev);
> +
> + return reset_release_bulk(&priv->resets);
> +}
> +
> static int cadence_spi_set_mode(struct udevice *bus, uint mode)
> {
> struct cadence_spi_priv *priv = dev_get_priv(bus);
> @@ -342,4 +357,5 @@ U_BOOT_DRIVER(cadence_spi) = {
> .platdata_auto_alloc_size = sizeof(struct cadence_spi_platdata),
> .priv_auto_alloc_size = sizeof(struct cadence_spi_priv),
> .probe = cadence_spi_probe,
> + .remove = cadence_spi_remove,
.remove() only ever gets executed for drivers setting DM_FLAG_OS_PREPARE
flag. Fix this in the other drivers too.
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list