[U-Boot] [PATCH v2 1/4] stm32mp1: add trusted boot with TF-A

Patrick Delaunay patrick.delaunay at st.com
Fri Feb 8 17:18:54 UTC 2019


Add support of trusted boot, using TF-A as first stage bootloader,
The boot sequence is
  BootRom >=> TF-A.stm32 (clock & DDR) >=> U-Boot.stm32

The TF-A monitor provides secure monitor with support of SMC
- proprietary to manage secure devices (BSEC for example)
- PSCI for power

The same device tree is used for STMicroelectronics boards with
basic boot and with trusted boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

Changes in v2:
    - Rebase and solve conflict on arch/arm/mach-stm32mp/config.mk

 arch/arm/Kconfig                    |  6 ++--
 arch/arm/mach-stm32mp/Kconfig       | 17 +++++++++--
 arch/arm/mach-stm32mp/config.mk     | 15 +++++++++-
 arch/arm/mach-stm32mp/cpu.c         |  9 ++++--
 board/st/stm32mp1/MAINTAINERS       |  5 ++--
 board/st/stm32mp1/README            | 56 +++++++++++++++++++++++++-----------
 configs/stm32mp15_trusted_defconfig | 57 +++++++++++++++++++++++++++++++++++++
 drivers/clk/clk_stm32mp1.c          |  2 ++
 drivers/ram/stm32mp1/stm32mp1_ram.c |  3 +-
 include/configs/stm32mp1.h          |  2 ++
 10 files changed, 144 insertions(+), 28 deletions(-)
 create mode 100644 configs/stm32mp15_trusted_defconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cefa8f4..9526cd2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1360,8 +1360,10 @@ config ARCH_STM32MP
 	help
 	  Support for STM32MP SoC family developed by STMicroelectronics,
 	  MPUs based on ARM cortex A core
-	  U-BOOT is running in DDR and SPL support is the unsecure First Stage
-	  BootLoader (FSBL)
+	  U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL).
+	  FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot
+	  chain.
+	  SPL is the unsecure FSBL for the basic boot chain.
 
 config ARCH_ROCKCHIP
 	bool "Support Rockchip SoCs"
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 8a929fa..3101d80 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -25,19 +25,30 @@ config SYS_SOC
 
 config TARGET_STM32MP1
 	bool "Support stm32mp1xx"
-	select ARCH_SUPPORT_PSCI
+	select ARCH_SUPPORT_PSCI if !STM32MP1_TRUSTED
 	select CPU_V7A
-	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_NONSEC if !STM32MP1_TRUSTED
 	select CPU_V7_HAS_VIRT
 	select PINCTRL_STM32
 	select STM32_RCC
 	select STM32_RESET
 	select SYS_ARCH_TIMER
-	select SYSRESET_SYSCON
+	imply SYSRESET_PSCI if STM32MP1_TRUSTED
+	imply SYSRESET_SYSCON if !STM32MP1_TRUSTED
 	help
 		target STMicroelectronics SOC STM32MP1 family
 		STMicroelectronics MPU with core ARMv7
 
+config STM32MP1_TRUSTED
+	bool "Support trusted boot with TF-A"
+	default y if !SPL
+	select ARM_SMCCC
+	help
+		Say Y here to enable boot with TF-A
+		Trusted boot chain is :
+		BootRom => TF-A.stm32 (clock & DDR) => U-Boot.stm32
+		TF-A monitor provides proprietary smc to manage secure devices
+
 config SYS_TEXT_BASE
 	prompt "U-Boot base address"
 	default 0xC0100000
diff --git a/arch/arm/mach-stm32mp/config.mk b/arch/arm/mach-stm32mp/config.mk
index f371aac..403af2a 100644
--- a/arch/arm/mach-stm32mp/config.mk
+++ b/arch/arm/mach-stm32mp/config.mk
@@ -3,7 +3,20 @@
 # Copyright (C) 2018, STMicroelectronics - All Rights Reserved
 #
 
-ALL-$(CONFIG_SPL_BUILD) += u-boot-spl.stm32
+ifndef CONFIG_SPL
+ALL-y += u-boot.stm32
+else
+ifdef CONFIG_SPL_BUILD
+ALL-y += u-boot-spl.stm32
+endif
+endif
+
+MKIMAGEFLAGS_u-boot.stm32 = -T stm32image -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+
+u-boot.stm32: MKIMAGEOUTPUT = u-boot.stm32.log
+
+u-boot.stm32: u-boot.bin FORCE
+	$(call if_changed,mkimage)
 
 MKIMAGEFLAGS_u-boot-spl.stm32 = -T stm32image -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE)
 
diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
index b893358..b96720f 100644
--- a/arch/arm/mach-stm32mp/cpu.c
+++ b/arch/arm/mach-stm32mp/cpu.c
@@ -59,6 +59,7 @@
 #define BSEC_OTP_MAC	57
 
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#ifndef CONFIG_STM32MP1_TRUSTED
 static void security_init(void)
 {
 	/* Disable the backup domain write protection */
@@ -114,6 +115,7 @@ static void security_init(void)
 	 */
 	writel(0x0, TAMP_CR1);
 }
+#endif /* CONFIG_STM32MP1_TRUSTED */
 
 /*
  * Debug init
@@ -130,7 +132,8 @@ static void dbgmcu_init(void)
 static u32 get_bootmode(void)
 {
 	u32 boot_mode;
-#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_STM32MP1_TRUSTED) && \
+	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 	u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
 	u32 bootrom_device, bootrom_instance;
 
@@ -167,9 +170,10 @@ int arch_cpu_init(void)
 
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 	dbgmcu_init();
-
+#ifndef CONFIG_STM32MP1_TRUSTED
 	security_init();
 #endif
+#endif
 
 	/* get bootmode from BootRom context: saved in TAMP register */
 	boot_mode = get_bootmode();
@@ -177,6 +181,7 @@ int arch_cpu_init(void)
 	if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
 		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
 #if defined(CONFIG_DEBUG_UART) && \
+	!defined(CONFIG_STM32MP1_TRUSTED) && \
 	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 	else
 		debug_uart_init();
diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS
index 48d8fd2..0a2eddb 100644
--- a/board/st/stm32mp1/MAINTAINERS
+++ b/board/st/stm32mp1/MAINTAINERS
@@ -2,7 +2,8 @@ STM32MP1 BOARD
 M:	Patrick Delaunay <patrick.delaunay at st.com>
 L:	uboot-stm32 at st-md-mailman.stormreply.com (moderated for non-subscribers)
 S:	Maintained
+F:	arch/arm/dts/stm32mp157*
 F:	board/st/stm32mp1
-F:	include/configs/stm32mp1.h
 F:	configs/stm32mp15_basic_defconfig
-F:	arch/arm/dts/stm32mp157*
+F:	configs/stm32mp15_trusted_defconfig
+F:	include/configs/stm32mp1.h
diff --git a/board/st/stm32mp1/README b/board/st/stm32mp1/README
index 174e6db..1c3e865 100644
--- a/board/st/stm32mp1/README
+++ b/board/st/stm32mp1/README
@@ -28,7 +28,6 @@ Everything is supported in Linux but U-Boot is limited to:
 
 And the necessary drivers
 1. I2C
-2. STPMU1
 2. STPMU1 (PMIC and regulator)
 3. Clock, Reset, Sysreset
 4. Fuse
@@ -45,15 +44,22 @@ BootRom => FSBL in SYSRAM => SSBL in DDR => OS (Linux Kernel)
 with FSBL = First Stage Bootloader
      SSBL = Second Stage Bootloader
 
-One boot configuration is supported:
+2 boot configurations are supported:
 
-   The "Basic" boot chain (defconfig_file : stm32mp15_basic_defconfig)
+1) The "Trusted" boot chain (defconfig_file : stm32mp15_trusted_defconfig)
+   BootRom => FSBL = Trusted Firmware-A (TF-A) => SSBL = U-Boot
+   TF-A performs a full initialization of Secure peripherals and installs a
+   secure monitor.
+   U-Boot is running in normal world and uses TF-A monitor
+   to access to secure resources
+
+2) The "Basic" boot chain (defconfig_file : stm32mp15_basic_defconfig)
    BootRom => FSBL = U-Boot SPL => SSBL = U-Boot
    SPL has limited security initialisation
    U-Boot is running in secure mode and provide a secure monitor to the kernel
    with only PSCI support (Power State Coordination Interface defined by ARM)
 
-All the STM32MP1 board supported by U-Boot use the same generic board
+All the STM32MP1 boards supported by U-Boot use the same generic board
 stm32mp1 which support all the bootable devices.
 
 Each board is configurated only with the associated device tree.
@@ -90,12 +96,14 @@ the supported device trees for stm32mp157 are:
 	# export KBUILD_OUTPUT=/path/to/output
 
 	for example: use one output directory for each configuration
+	# export KBUILD_OUTPUT=stm32mp15_trusted
 	# export KBUILD_OUTPUT=stm32mp15_basic
 
-4. Configure the U-Boot:
+4. Configure U-Boot:
 
 	# make <defconfig_file>
 
+	- For trusted boot mode : "stm32mp15_trusted_defconfig"
 	- For basic boot mode: "stm32mp15_basic_defconfig"
 
 5. Configure the device-tree and build the U-Boot image:
@@ -104,12 +112,17 @@ the supported device trees for stm32mp157 are:
 
 
   example:
-     basic boot on ev1
+  a) trusted boot on ev1
+	# export KBUILD_OUTPUT=stm32mp15_trusted
+	# make stm32mp15_trusted_defconfig
+	# make DEVICE_TREE=stm32mp157c-ev1 all
+
+  b) basic boot on ev1
 	# export KBUILD_OUTPUT=stm32mp15_basic
 	# make stm32mp15_basic_defconfig
 	# make DEVICE_TREE=stm32mp157c-ev1 all
 
-     basic boot on ed1
+  c) basic boot on ed1
 	# export KBUILD_OUTPUT=stm32mp15_basic
 	# make stm32mp15_basic_defconfig
 	# make DEVICE_TREE=stm32mp157c-ed1 all
@@ -122,6 +135,11 @@ the supported device trees for stm32mp157 are:
   So in the output directory (selected by KBUILD_OUTPUT),
   you can found the needed files:
 
+  a) For Trusted boot
+   + FSBL = tf-a.stm32 (provided by TF-A compilation)
+   + SSBL = u-boot.stm32
+
+  b) For Basic boot
    + FSBL = spl/u-boot-spl.stm32
    + SSBL = u-boot.img
 
@@ -135,7 +153,6 @@ You can select the boot mode, on the board ed1 with the switch SW1
  -----------------------------------
   Reserved	0	0	0
   NOR		0	0	1
-  SD-Card	1	1	1
   SD-Card	1	0	1
   eMMC		0	1	0
   NAND		0	1	1
@@ -158,14 +175,14 @@ The minimal requirements for STMP32MP1 boot up to U-Boot are:
 - one ssbl partition for U-Boot
 
 Then the minimal GPT partition is:
-   ----- ------- --------- -------------
-  | Num | Name  | Size    |  Content    |
-   ----- ------- -------- --------------
+   ----- ------- --------- --------------
+  | Num | Name  | Size    |  Content     |
+   ----- ------- -------- ---------------
   |  1  | fsbl1 | 256 KiB |  TF-A or SPL |
   |  2  | fsbl2 | 256 KiB |  TF-A or SPL |
-  |  3  | ssbl  | enought |  U-Boot     |
-  |  *  |  -    |  -      |  Boot/Rootfs|
-   ----- ------- --------- -------------
+  |  3  | ssbl  | enought |  U-Boot      |
+  |  *  |  -    |  -      |  Boot/Rootfs |
+   ----- ------- --------- --------------
 
 (*) add bootable partition for extlinux.conf
     following Generic Distribution
@@ -189,7 +206,7 @@ for example: with gpt table with 128 entries
 
 	you can add other partitions for kernel
 	one partition rootfs for example:
-		-n 3:5154:		-c 4:rootfs
+		-n 4:5154:		-c 4:rootfs \
 
   c) copy the FSBL (2 times) and SSBL file on the correct partition.
      in this example in partition 1 to 3
@@ -199,6 +216,11 @@ for example: with gpt table with 128 entries
 	# dd if=u-boot-spl.stm32 of=/dev/mmcblk0p2
 	# dd if=u-boot.img of=/dev/mmcblk0p3
 
+     for trusted boot mode :
+	# dd if=tf-a.stm32 of=/dev/mmcblk0p1
+	# dd if=tf-a.stm32 of=/dev/mmcblk0p2
+	# dd if=u-boot.stm32 of=/dev/mmcblk0p3
+
 To boot from SDCard, select BootPinMode = 1 1 1 and reset.
 
 8. Prepare eMMC
@@ -208,7 +230,7 @@ You can use U-Boot to copy binary in eMMC.
 In the next example, you need to boot from SDCARD and the images (u-boot-spl.stm32, u-boot.img)
 are presents on SDCARD (mmc 0) in ext4 partition 4 (bootfs).
 
-To boot from SDCard, select BootPinMode = 1 1 1 and reset.
+To boot from SDCard, select BootPinMode = 1 0 1 and reset.
 
 Then you update the eMMC with the next U-Boot command :
 
@@ -227,7 +249,7 @@ b) copy SPL on eMMC on firts boot partition
 	# mmc write ${fileaddr} 0 200
 	# mmc partconf 1 1 1 0
 
-b) copy U-Boot in first GPT partition of eMMC
+c) copy U-Boot in first GPT partition of eMMC
 
 	# ext4load mmc 0:4 0xC0000000 u-boot.img
 	# mmc dev 1
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
new file mode 100644
index 0000000..e905ae1
--- /dev/null
+++ b/configs/stm32mp15_trusted_defconfig
@@ -0,0 +1,57 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_STM32MP1=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_PROMPT="STM32MP> "
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_STM32_ADC=y
+CONFIG_DM_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_STM32_SDMMC2=y
+CONFIG_PHY=y
+CONFIG_PHY_STM32_USBPHYC=y
+# CONFIG_PINCTRL_FULL is not set
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_STPMU1=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_REGULATOR_STM32_VREFBUF=y
+CONFIG_DM_REGULATOR_STPMU1=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_STM32_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0483
+CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index b7c5d34..9e9c667 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -15,10 +15,12 @@
 #include <dt-bindings/clock/stm32mp1-clks.h>
 #include <dt-bindings/clock/stm32mp1-clksrc.h>
 
+#ifndef CONFIG_STM32MP1_TRUSTED
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 /* activate clock tree initialization in the driver */
 #define STM32MP1_CLOCK_TREE_INIT
 #endif
+#endif
 
 #define MAX_HSI_HZ		64000000
 
diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c
index bd497a3..e45a3b2 100644
--- a/drivers/ram/stm32mp1/stm32mp1_ram.c
+++ b/drivers/ram/stm32mp1/stm32mp1_ram.c
@@ -157,7 +157,8 @@ static int stm32mp1_ddr_probe(struct udevice *dev)
 
 	priv->info.base = STM32_DDR_BASE;
 
-#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_STM32MP1_TRUSTED) && \
+	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 	priv->info.size = 0;
 	return stm32mp1_ddr_setup(dev);
 #else
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index 701298c..4722672 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -17,10 +17,12 @@
  */
 #define CONFIG_SYS_HZ				1000
 
+#ifndef CONFIG_STM32MP1_TRUSTED
 /* PSCI support */
 #define CONFIG_ARMV7_PSCI_1_0
 #define CONFIG_ARMV7_SECURE_BASE		STM32_SYSRAM_BASE
 #define CONFIG_ARMV7_SECURE_MAX_SIZE		STM32_SYSRAM_SIZE
+#endif
 
 /*
  * malloc() pool size
-- 
2.7.4



More information about the U-Boot mailing list