[U-Boot] [PATCH v2 7/7] i2c: mux: Generate longer i2c mux name

[Heiko Schocher]

Hello Michal,

Am 31.01.2019 um 16:31 schrieb Michal Simek:
> For !DM case busses are listed as
> ZynqMP> i2c bus
> Bus 0:	zynq_0
> Bus 1:	zynq_0->PCA9544A at 0x75:0
> Bus 2:	zynq_0->PCA9544A at 0x75:1
> Bus 3:	zynq_0->PCA9544A at 0x75:2
> Bus 4:	zynq_1
> Bus 5:	zynq_1->PCA9548 at 0x74:0
> Bus 6:	zynq_1->PCA9548 at 0x74:1
> Bus 7:	zynq_1->PCA9548 at 0x74:2
> Bus 8:	zynq_1->PCA9548 at 0x74:3
> Bus 9:	zynq_1->PCA9548 at 0x74:4
> Bus 10:	zynq_1->PCA9548 at 0x75:0
> Bus 11:	zynq_1->PCA9548 at 0x75:1
> Bus 12:	zynq_1->PCA9548 at 0x75:2
> Bus 13:	zynq_1->PCA9548 at 0x75:3
> Bus 14:	zynq_1->PCA9548 at 0x75:4
> Bus 15:	zynq_1->PCA9548 at 0x75:5
> Bus 16:	zynq_1->PCA9548 at 0x75:6
> Bus 17:	zynq_1->PCA9548 at 0x75:7
> 
> where is exactly describing i2c bus topology.
> By moving to DM case i2c mux buses are using names from DT and because
> i2c-muxes describing sub busses with the same names like i2c at 0, etc it
> is hard to identify which bus is where.
> Linux is adding topology information to i2c-mux busses to identify them
> better.
> This patch is doing the same and composing bus name with topology
> information.
> 
> When patch is applied with topology information on zcu102-revA.
> ZynqMP> i2c bus
> Bus 0:	i2c at ff020000
>     20: gpio at 20, offset len 1, flags 0
>     21: gpio at 21, offset len 1, flags 0
>     75: i2c-mux at 75, offset len 1, flags 0
> Bus 2:	i2c at ff020000->i2c-mux at 75->i2c at 0
> Bus 3:	i2c at ff020000->i2c-mux at 75->i2c at 1
> Bus 4:	i2c at ff020000->i2c-mux at 75->i2c at 2
> Bus 1:	i2c at ff030000  (active 1)
>     74: i2c-mux at 74, offset len 1, flags 0
>     75: i2c-mux at 75, offset len 1, flags 0
> Bus 5:	i2c at ff030000->i2c-mux at 74->i2c at 0  (active 5)
>     54: eeprom at 54, offset len 1, flags 0
> Bus 6:	i2c at ff030000->i2c-mux at 74->i2c at 1
> Bus 7:	i2c at ff030000->i2c-mux at 74->i2c at 2
> Bus 8:	i2c at ff030000->i2c-mux at 74->i2c at 3
> Bus 9:	i2c at ff030000->i2c-mux at 74->i2c at 4
> Bus 10:	i2c at ff030000->i2c-mux at 75->i2c at 0
> Bus 11:	i2c at ff030000->i2c-mux at 75->i2c at 1
> Bus 12:	i2c at ff030000->i2c-mux at 75->i2c at 2
> Bus 13:	i2c at ff030000->i2c-mux at 75->i2c at 3
> Bus 14:	i2c at ff030000->i2c-mux at 75->i2c at 4
> Bus 15:	i2c at ff030000->i2c-mux at 75->i2c at 5
> Bus 16:	i2c at ff030000->i2c-mux at 75->i2c at 6
> Bus 17:	i2c at ff030000->i2c-mux at 75->i2c at 7
> 
> Behavior before the patch is applied.
> ZynqMP> i2c bus
> Bus 0:	i2c at ff020000
>     20: gpio at 20, offset len 1, flags 0
>     21: gpio at 21, offset len 1, flags 0
>     75: i2c-mux at 75, offset len 1, flags 0
> Bus 2:	i2c at 0
> Bus 3:	i2c at 1
> Bus 4:	i2c at 2
> Bus 1:	i2c at ff030000  (active 1)
>     74: i2c-mux at 74, offset len 1, flags 0
>     75: i2c-mux at 75, offset len 1, flags 0
> Bus 5:	i2c at 0  (active 5)
>     54: eeprom at 54, offset len 1, flags 0
> Bus 6:	i2c at 1
> Bus 7:	i2c at 2
> Bus 8:	i2c at 3
> Bus 9:	i2c at 4
> Bus 10:	i2c at 0
> Bus 11:	i2c at 1
> Bus 12:	i2c at 2
> Bus 13:	i2c at 3
> Bus 14:	i2c at 4
> Bus 15:	i2c at 5
> Bus 16:	i2c at 6
> Bus 17:	i2c at 7
> 
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
> 
> Changes in v2:
> - Fix headers
> - Change patch description to focus only on bus name
> 
>   drivers/i2c/muxes/i2c-mux-uclass.c | 29 ++++++++++++++++++++++++++---
>   1 file changed, 26 insertions(+), 3 deletions(-)

Applied to u-boot-i2c.git master

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de