[U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds

Lukasz Majewski lukma at denx.de
Sat Feb 2 21:48:19 UTC 2019


On Fri, 1 Feb 2019 16:40:11 +0000
Abel Vesa <abel.vesa at nxp.com> wrote:

> Since the fsl_esdhc will also be used by SPL, make the
> preprocessor switches more generic to allow any kind of build.
> 

The same here - as with ehci-mx6.
Thanks Abel for this patch.

Reviewed-by: Lukasz Majewski <lukma at denx.de>

> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> ---
>  drivers/mmc/fsl_esdhc.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index 21fa2ab..9e34557 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -804,7 +804,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
>  	case MMC_SIGNAL_VOLTAGE_330:
>  		if (priv->vs18_enable)
>  			return -EIO;
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
>  		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
>  			ret = regulator_set_value(priv->vqmmc_dev,
> 3300000); if (ret) {
> @@ -823,7 +823,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
>  
>  		return -EAGAIN;
>  	case MMC_SIGNAL_VOLTAGE_180:
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
>  		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
>  			ret = regulator_set_value(priv->vqmmc_dev,
> 1800000); if (ret) {
> @@ -1442,7 +1442,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
>  	int node = dev_of_offset(dev);
>  	struct esdhc_soc_data *data =
>  		(struct esdhc_soc_data *)dev_get_driver_data(dev);
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
>  	struct udevice *vqmmc_dev;
>  #endif
>  	fdt_addr_t addr;
> @@ -1500,7 +1500,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
>  
>  	priv->vs18_enable = 0;
>  
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
>  	/*
>  	 * If emmc I/O has a fixed voltage at 1.8V, this must be
> provided,
>  	 * otherwise, emmc will work abnormally.




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190202/df6e5e61/attachment.sig>


More information about the U-Boot mailing list