[U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)
Vagrant Cascadian
vagrant at debian.org
Wed Feb 13 16:50:57 UTC 2019
I *think* this board is getting the wrong fdtfile set:
U-Boot 2019.01+dfsg-1 (Jan 15 2019 - 00:36:19 +0000)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 37C
Reset cause: WDOG
Board: MX6 Cubox-i
DRAM: 3.8 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default
environment
No panel detected: default to HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Card did not respond to voltage select!
Net: FEC
Hit any key to stop autoboot: 0
=> printenv som_rev
som_rev=undefined
=> printenv has_emmc
has_emmc=undefined
=> printenv findfdt
findfdt=if test ${board_rev} = MX6Q; then setenv fdtprefix imx6q; fi; if
test ${board_rev} = MX6DL; then setenv fdtprefix imx6dl; fi; if test
${som_rev} = V15; then setenv fdtsuffix -som-v15; fi; if test
${has_emmc} = yes; then setenv emmcsuffix -emmc; fi; if test
${board_name} = HUMMINGBOARD2 ; then setenv fdtfile
${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; if test
${board_name} = HUMMINGBOARD ; then setenv fdtfile
${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; if test
${board_name} = CUBOXI ; t=>
=> run findfdt
=> printenv fdtfile
fdtfile=imx6q-cubox-i.dtb
It pretty clearly identifies itself as a rev1.5 in the boot message, but
som_rev is set to undefined, and so it sets fdtfile to the default version.
I haven't had a chance to check a newer version of u-boot, but I don't
see any obvious changes for this board since v2019.01.
My *hunch* is it's either of these two commits, since it was detecting
it correctly in v2018.07:
19ed6063a567c6924dbfc358bf4ce9a60a31c567
mx6cuboxi: Use mmc_get_op_cond() to check for an eMMC
86e5a7fc13d4eb7e21630b9d421469c663dc8c77
mx6cuboxi: Add support for eMMC booting
live well,
vagrant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190213/c91a190c/attachment.sig>
More information about the U-Boot
mailing list