[U-Boot] [PATCH 1/6] pico-imx6ul: Import dts files from kernel

Otavio Salvador otavio.salvador at ossystems.com.br
Thu Feb 14 12:43:33 UTC 2019


On Thu, Feb 14, 2019 at 10:02 AM Fabio Estevam <festevam at gmail.com> wrote:
>
> Import the device tree files from kernel 5.0-rc6 in preparation
> for driver model conversion.
>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>

Acked-by: Otavio Salvador <otavio at ossystems.com.br>

> ---
>  arch/arm/dts/imx6ul-pico-hobbit.dts | 100 ++++++
>  arch/arm/dts/imx6ul-pico-pi.dts     |  97 ++++++
>  arch/arm/dts/imx6ul-pico.dtsi       | 461 ++++++++++++++++++++++++++++
>  3 files changed, 658 insertions(+)
>  create mode 100644 arch/arm/dts/imx6ul-pico-hobbit.dts
>  create mode 100644 arch/arm/dts/imx6ul-pico-pi.dts
>  create mode 100644 arch/arm/dts/imx6ul-pico.dtsi
>
> diff --git a/arch/arm/dts/imx6ul-pico-hobbit.dts b/arch/arm/dts/imx6ul-pico-hobbit.dts
> new file mode 100644
> index 0000000000..39eeeddac3
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-pico-hobbit.dts
> @@ -0,0 +1,100 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Copyright 2015 Technexion Ltd.
> +//
> +// Author: Wig Cheng  <wig.cheng at technexion.com>
> +//        Richard Hu <richard.hu at technexion.com>
> +//        Tapani Utriainen <tapani at technexion.com>
> +/dts-v1/;
> +
> +#include "imx6ul-pico.dtsi"
> +/ {
> +       model = "TechNexion PICO-IMX6UL and HOBBIT baseboard";
> +       compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> +               led {
> +                       label = "gpio-led";
> +                       gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
> +               };
> +       };
> +
> +       sound {
> +               compatible = "fsl,imx-audio-sgtl5000";
> +               model = "imx6ul-sgtl5000";
> +               audio-cpu = <&sai1>;
> +               audio-codec = <&sgtl5000>;
> +               audio-routing =
> +                       "LINE_IN", "Line In Jack",
> +                       "MIC_IN", "Mic Jack",
> +                       "Mic Jack", "Mic Bias",
> +                       "Headphone Jack", "HP_OUT";
> +       };
> +
> +       sys_mclk: clock-sys-mclk {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <24576000>;
> +       };
> +};
> +
> +&i2c2 {
> +       clock_frequency = <100000>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c2>;
> +       status = "okay";
> +
> +       sgtl5000: codec at a {
> +               reg = <0x0a>;
> +               compatible = "fsl,sgtl5000";
> +               clocks = <&sys_mclk>;
> +               VDDA-supply = <&reg_2p5v>;
> +               VDDIO-supply = <&reg_3p3v>;
> +       };
> +};
> +
> +&i2c3 {
> +       status = "okay";
> +
> +       polytouch: touchscreen at 38 {
> +               compatible = "edt,edt-ft5x06";
> +               reg = <0x38>;
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
> +               reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
> +               touchscreen-size-x = <800>;
> +               touchscreen-size-y = <480>;
> +       };
> +
> +       adc081c: adc at 50 {
> +               compatible = "ti,adc081c";
> +               reg = <0x50>;
> +               vref-supply = <&reg_3p3v>;
> +       };
> +};
> +
> +&iomuxc {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_hog>;
> +
> +       pinctrl_hog: hoggrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_CSI_VSYNC__GPIO4_IO19         0x10b0
> +                       MX6UL_PAD_CSI_DATA00__GPIO4_IO21        0x10b0
> +                       MX6UL_PAD_CSI_DATA01__GPIO4_IO22        0x10b0
> +                       MX6UL_PAD_CSI_DATA02__GPIO4_IO23        0x10b0
> +                       MX6UL_PAD_UART1_CTS_B__GPIO1_IO18       0x10b0
> +                       MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02      0x10b0
> +               >;
> +       };
> +
> +       pinctrl_gpio_leds: gpioledsgrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29     0x10b0
> +               >;
> +       };
> +};
> diff --git a/arch/arm/dts/imx6ul-pico-pi.dts b/arch/arm/dts/imx6ul-pico-pi.dts
> new file mode 100644
> index 0000000000..de07357b27
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-pico-pi.dts
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Copyright 2015 Technexion Ltd.
> +//
> +// Author: Wig Cheng  <wig.cheng at technexion.com>
> +//        Richard Hu <richard.hu at technexion.com>
> +//        Tapani Utriainen <tapani at technexion.com>
> +/dts-v1/;
> +
> +#include "imx6ul-pico.dtsi"
> +/ {
> +       model = "TechNexion PICO-IMX6UL and PI baseboard";
> +       compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul";
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> +               led {
> +                       label = "gpio-led";
> +                       gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
> +               };
> +       };
> +
> +       sound {
> +               compatible = "fsl,imx-audio-sgtl5000";
> +               model = "imx6ul-sgtl5000";
> +               audio-cpu = <&sai1>;
> +               audio-codec = <&sgtl5000>;
> +               audio-routing =
> +                       "LINE_IN", "Line In Jack",
> +                       "MIC_IN", "Mic Jack",
> +                       "Mic Jack", "Mic Bias",
> +                       "Headphone Jack", "HP_OUT";
> +       };
> +
> +       sys_mclk: clock-sys-mclk {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <24576000>;
> +       };
> +};
> +
> +&i2c2 {
> +       clock_frequency = <100000>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c2>;
> +       status = "okay";
> +
> +       sgtl5000: codec at a {
> +               reg = <0x0a>;
> +               compatible = "fsl,sgtl5000";
> +               clocks = <&sys_mclk>;
> +               VDDA-supply = <&reg_2p5v>;
> +               VDDIO-supply = <&reg_3p3v>;
> +       };
> +};
> +
> +&i2c3 {
> +       clock_frequency = <100000>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c3>;
> +       status = "okay";
> +
> +       polytouch: touchscreen at 38 {
> +               compatible = "edt,edt-ft5x06";
> +               reg = <0x38>;
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
> +               reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
> +               touchscreen-size-x = <800>;
> +               touchscreen-size-y = <480>;
> +       };
> +};
> +
> +&iomuxc {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_hog>;
> +
> +       pinctrl_hog: hoggrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_CSI_VSYNC__GPIO4_IO19         0x10b0
> +                       MX6UL_PAD_CSI_DATA00__GPIO4_IO21        0x10b0
> +                       MX6UL_PAD_CSI_DATA01__GPIO4_IO22        0x10b0
> +                       MX6UL_PAD_CSI_DATA02__GPIO4_IO23        0x10b0
> +                       MX6UL_PAD_UART1_CTS_B__GPIO1_IO18       0x10b0
> +                       MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02      0x10b0
> +               >;
> +       };
> +
> +       pinctrl_gpio_leds: gpioledsgrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_CSI_HSYNC__GPIO4_IO20         0x10b0
> +               >;
> +       };
> +};
> diff --git a/arch/arm/dts/imx6ul-pico.dtsi b/arch/arm/dts/imx6ul-pico.dtsi
> new file mode 100644
> index 0000000000..de9f83189b
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-pico.dtsi
> @@ -0,0 +1,461 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Copyright 2015 Technexion Ltd.
> +//
> +// Author: Wig Cheng  <wig.cheng at technexion.com>
> +//        Richard Hu <richard.hu at technexion.com>
> +//        Tapani Utriainen <tapani at technexion.com>
> +/dts-v1/;
> +
> +#include "imx6ul.dtsi"
> +
> +/ {
> +       /* Will be filled by the bootloader */
> +       memory at 80000000 {
> +               device_type = "memory";
> +               reg = <0x80000000 0>;
> +       };
> +
> +       chosen {
> +               stdout-path = &uart6;
> +       };
> +
> +       backlight {
> +               compatible = "pwm-backlight";
> +               pwms = <&pwm3 0 5000000>;
> +               brightness-levels = <0 4 8 16 32 64 128 255>;
> +               default-brightness-level = <6>;
> +               status = "okay";
> +       };
> +
> +       reg_2p5v: regulator-2p5v {
> +               compatible = "regulator-fixed";
> +               regulator-name = "2P5V";
> +               regulator-min-microvolt = <2500000>;
> +               regulator-max-microvolt = <2500000>;
> +       };
> +
> +       reg_3p3v: regulator-3p3v {
> +               compatible = "regulator-fixed";
> +               regulator-name = "3P3V";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +       };
> +
> +       reg_sd1_vmmc: regulator-sd1-vmmc {
> +               compatible = "regulator-fixed";
> +               regulator-name = "VSD_3V3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> +               enable-active-high;
> +       };
> +
> +       reg_usb_otg_vbus: regulator-usb-otg-vbus {
> +               compatible = "regulator-fixed";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_usb_otg1>;
> +               regulator-name = "usb_otg_vbus";
> +               regulator-min-microvolt = <5000000>;
> +               regulator-max-microvolt = <5000000>;
> +               gpio = <&gpio1 6 0>;
> +       };
> +
> +       reg_brcm: regulator-brcm {
> +               compatible = "regulator-fixed";
> +               enable-active-high;
> +               gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_brcm_reg>;
> +               regulator-name = "brcm_reg";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               startup-delay-us = <200000>;
> +       };
> +};
> +
> +&can1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_flexcan1>;
> +       status = "okay";
> +};
> +
> +&can2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_flexcan2>;
> +       status = "okay";
> +};
> +
> +&clks {
> +       assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> +       assigned-clock-rates = <786432000>;
> +};
> +
> +&fec2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_enet2>;
> +       phy-mode = "rmii";
> +       phy-handle = <&ethphy1>;
> +       status = "okay";
> +       phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
> +       phy-reset-duration = <1>;
> +
> +       mdio {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               ethphy1: ethernet-phy at 1 {
> +                       compatible = "ethernet-phy-ieee802.3-c22";
> +                       reg = <1>;
> +                       max-speed = <100>;
> +                       interrupt-parent = <&gpio5>;
> +                       interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> +               };
> +       };
> +};
> +
> +&i2c1 {
> +       clock-frequency = <100000>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_i2c1>;
> +       status = "okay";
> +
> +       pmic: pfuze3000 at 8 {
> +               compatible = "fsl,pfuze3000";
> +               reg = <0x08>;
> +
> +               regulators {
> +                       /* VDD_ARM_SOC_IN*/
> +                       sw1b_reg: sw1b {
> +                               regulator-min-microvolt = <700000>;
> +                               regulator-max-microvolt = <1475000>;
> +                               regulator-boot-on;
> +                               regulator-always-on;
> +                               regulator-ramp-delay = <6250>;
> +                       };
> +
> +                       /* DRAM */
> +                       sw3a_reg: sw3 {
> +                               regulator-min-microvolt = <900000>;
> +                               regulator-max-microvolt = <1650000>;
> +                               regulator-boot-on;
> +                               regulator-always-on;
> +                       };
> +
> +                       /* DRAM */
> +                       vref_reg: vrefddr {
> +                               regulator-boot-on;
> +                               regulator-always-on;
> +                       };
> +               };
> +       };
> +};
> +
> +&lcdif {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
> +       display = <&display0>;
> +       status = "okay";
> +
> +       display0: display0 {
> +               bits-per-pixel = <32>;
> +               bus-width = <24>;
> +
> +               display-timings {
> +                       native-mode = <&timing0>;
> +
> +                       timing0: timing0 {
> +                               clock-frequency = <33200000>;
> +                               hactive = <800>;
> +                               vactive = <480>;
> +                               hfront-porch = <210>;
> +                               hback-porch = <46>;
> +                               hsync-len = <1>;
> +                               vback-porch = <22>;
> +                               vfront-porch = <23>;
> +                               vsync-len = <1>;
> +                               hsync-active = <0>;
> +                               vsync-active = <0>;
> +                               de-active = <1>;
> +                               pixelclk-active = <0>;
> +                       };
> +               };
> +       };
> +};
> +
> +&pwm3 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_pwm3>;
> +       status = "okay";
> +};
> +
> +&pwm7 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_pwm7>;
> +       status = "okay";
> +};
> +
> +&pwm8 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_pwm8>;
> +       status = "okay";
> +};
> +
> +&sai1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_sai1>;
> +       status = "okay";
> +};
> +
> +&uart3 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_uart3>;
> +       uart-has-rtscts;
> +       status = "okay";
> +};
> +
> +&uart6 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_uart6>;
> +       status = "okay";
> +};
> +
> +&usbotg1 {
> +       vbus-supply = <&reg_usb_otg_vbus>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_usb_otg1_id>;
> +       dr_mode = "otg";
> +       disable-over-current;
> +       status = "okay";
> +};
> +
> +&usbotg2 {
> +       dr_mode = "host";
> +       disable-over-current;
> +       status = "okay";
> +};
> +
> +&usdhc1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_usdhc1>;
> +       bus-width = <8>;
> +       no-1-8-v;
> +       non-removable;
> +       keep-power-in-suspend;
> +       status = "okay";
> +};
> +
> +&usdhc2 {  /* Wifi SDIO */
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_usdhc2>;
> +       no-1-8-v;
> +       non-removable;
> +       keep-power-in-suspend;
> +       wakeup-source;
> +       vmmc-supply = <&reg_brcm>;
> +       status = "okay";
> +};
> +
> +&wdog1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_wdog>;
> +       fsl,ext-reset-output;
> +};
> +
> +&iomuxc {
> +       pinctrl_brcm_reg: brcmreggrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_NAND_DATA06__GPIO4_IO08       0x10b0  /* WL_REG_ON */
> +                       MX6UL_PAD_NAND_DATA04__GPIO4_IO06       0x10b0  /* WL_HOST_WAKE */
> +               >;
> +       };
> +
> +       pinctrl_enet2: enet2grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO    0x1b0b0
> +                       MX6UL_PAD_ENET1_TX_EN__ENET2_MDC        0x1b0b0
> +                       MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
> +                       MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
> +                       MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
> +                       MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
> +                       MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b0b0
> +                       MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
> +                       MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
> +                       MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b031
> +                       MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06      0x800
> +                       MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28     0x79
> +               >;
> +       };
> +
> +       pinctrl_flexcan1: flexcan1grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX   0x1b020
> +                       MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX   0x1b020
> +               >;
> +       };
> +
> +       pinctrl_flexcan2: flexcan2grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX   0x1b020
> +                       MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX      0x1b020
> +               >;
> +       };
> +
> +       pinctrl_i2c1: i2c1grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_GPIO1_IO02__I2C1_SCL          0x4001b8b0
> +                       MX6UL_PAD_GPIO1_IO03__I2C1_SDA          0x4001b8b0
> +               >;
> +       };
> +
> +       pinctrl_i2c2: i2c2grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_UART5_TX_DATA__I2C2_SCL       0x4001b8b0
> +                       MX6UL_PAD_UART5_RX_DATA__I2C2_SDA       0x4001b8b0
> +               >;
> +       };
> +
> +       pinctrl_i2c3: i2c3grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_UART1_TX_DATA__I2C3_SCL       0x4001b8b0
> +                       MX6UL_PAD_UART1_RX_DATA__I2C3_SDA       0x4001b8b0
> +                       >;
> +       };
> +
> +       pinctrl_lcdif_dat: lcdifdatgrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_LCD_DATA00__LCDIF_DATA00      0x79
> +                       MX6UL_PAD_LCD_DATA01__LCDIF_DATA01      0x79
> +                       MX6UL_PAD_LCD_DATA02__LCDIF_DATA02      0x79
> +                       MX6UL_PAD_LCD_DATA03__LCDIF_DATA03      0x79
> +                       MX6UL_PAD_LCD_DATA04__LCDIF_DATA04      0x79
> +                       MX6UL_PAD_LCD_DATA05__LCDIF_DATA05      0x79
> +                       MX6UL_PAD_LCD_DATA06__LCDIF_DATA06      0x79
> +                       MX6UL_PAD_LCD_DATA07__LCDIF_DATA07      0x79
> +                       MX6UL_PAD_LCD_DATA08__LCDIF_DATA08      0x79
> +                       MX6UL_PAD_LCD_DATA09__LCDIF_DATA09      0x79
> +                       MX6UL_PAD_LCD_DATA10__LCDIF_DATA10      0x79
> +                       MX6UL_PAD_LCD_DATA11__LCDIF_DATA11      0x79
> +                       MX6UL_PAD_LCD_DATA12__LCDIF_DATA12      0x79
> +                       MX6UL_PAD_LCD_DATA13__LCDIF_DATA13      0x79
> +                       MX6UL_PAD_LCD_DATA14__LCDIF_DATA14      0x79
> +                       MX6UL_PAD_LCD_DATA15__LCDIF_DATA15      0x79
> +                       MX6UL_PAD_LCD_DATA16__LCDIF_DATA16      0x79
> +                       MX6UL_PAD_LCD_DATA17__LCDIF_DATA17      0x79
> +                       MX6UL_PAD_LCD_DATA18__LCDIF_DATA18      0x79
> +                       MX6UL_PAD_LCD_DATA19__LCDIF_DATA19      0x79
> +                       MX6UL_PAD_LCD_DATA20__LCDIF_DATA20      0x79
> +                       MX6UL_PAD_LCD_DATA21__LCDIF_DATA21      0x79
> +                       MX6UL_PAD_LCD_DATA22__LCDIF_DATA22      0x79
> +                       MX6UL_PAD_LCD_DATA23__LCDIF_DATA23      0x79
> +               >;
> +       };
> +
> +       pinctrl_lcdif_ctrl: lcdifctrlgrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_LCD_CLK__LCDIF_CLK            0x79
> +                       MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE      0x79
> +                       MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC        0x79
> +                       MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC        0x79
> +                       /* LCD reset */
> +                       MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x79
> +               >;
> +       };
> +
> +       pinctrl_pwm3: pwm3grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_NAND_ALE__PWM3_OUT            0x110b0
> +               >;
> +       };
> +
> +       pinctrl_pwm7: pwm7grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT        0x110b0
> +               >;
> +       };
> +
> +       pinctrl_pwm8: pwm8grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_ENET1_RX_ER__PWM8_OUT         0x110b0
> +               >;
> +       };
> +
> +       pinctrl_sai1: sai1grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC      0x1b0b0
> +                       MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK      0x1b0b0
> +                       MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA      0x110b0
> +                       MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA      0x1f0b8
> +               >;
> +       };
> +
> +       pinctrl_uart3: uart3grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX   0x1b0b0
> +                       MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX   0x1b0b0
> +                       MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS    0x1b0b0
> +                       MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS    0x1b0b0
> +               >;
> +       };
> +
> +       pinctrl_uart5: uart5grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX      0x1b0b1
> +                       MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX      0x1b0b1
> +                       MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS     0x1b0b1
> +                       MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS     0x1b0b1
> +               >;
> +       };
> +
> +       pinctrl_uart6: uart6grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_CSI_MCLK__UART6_DCE_TX        0x1b0b1
> +                       MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX      0x1b0b1
> +               >;
> +       };
> +
> +       pinctrl_usb_otg1: usbotg1grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_GPIO1_IO06__GPIO1_IO06        0x10b0
> +                       >;
> +       };
> +
> +       pinctrl_usb_otg1_id: usbotg1idgrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
> +               >;
> +       };
> +
> +       pinctrl_usdhc1: usdhc1grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
> +                       MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x10071
> +                       MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
> +                       MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
> +                       MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
> +                       MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
> +                       MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B      0x03029
> +                       MX6UL_PAD_NAND_READY_B__USDHC1_DATA4    0x17059
> +                       MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5      0x17059
> +                       MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6      0x17059
> +                       MX6UL_PAD_NAND_CLE__USDHC1_DATA7        0x17059
> +               >;
> +       };
> +
> +       pinctrl_usdhc2: usdhc2grp {
> +               fsl,pins = <
> +                       MX6UL_PAD_NAND_WE_B__USDHC2_CMD         0x17059
> +                       MX6UL_PAD_NAND_RE_B__USDHC2_CLK         0x10059
> +                       MX6UL_PAD_NAND_DATA00__USDHC2_DATA0     0x17059
> +                       MX6UL_PAD_NAND_DATA01__USDHC2_DATA1     0x17059
> +                       MX6UL_PAD_NAND_DATA02__USDHC2_DATA2     0x17059
> +                       MX6UL_PAD_NAND_DATA03__USDHC2_DATA3     0x17059
> +               >;
> +       };
> +
> +       pinctrl_wdog: wdoggrp {
> +               fsl,pins = <
> +                       MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
> +               >;
> +       };
> +};
> --
> 2.17.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot



-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854          Mobile: +1 (347) 903-9750


More information about the U-Boot mailing list