[U-Boot] SPL_FIT_SIGNATURE on am3358

[Douglas Zobel]

I'm having trouble getting verified boot working in SPL on an am3358 based
platform.

The problem I hit is when fit_image_verify_with_data()
calls fit_image_verify_required_sigs().  The 5th argument (sig_blob) is
gd_fdt_blob() which resolves to NULL.  This argument should be the FDT
containing the public keys.  I assume this happens because SPL_OF_CONTROL
isn't enabled.  As far as I can tell, SPL_OF_CONTROL isn't working on
am33xx boards; enabling it causes SPL to loop infinitely in i2c init (tried
on my custom hardware as well as Beaglebone Black).

So the public key needs to be found elsewhere.  I can keep a separate FDT
with the public key stored in a read-only location.  My question is what is
the 'right' way to load it?  Is there an interface for
populating gd_fdt_blob() with my own FDT (without SPL_OF_CONTROL enabled)?
Or should I modify fit_image_verify_with_data() to get the FDT from
elsewhere (and probably other similar calls as well)?

-Doug

-- 










This email and any attachments are for the exclusive use of the 
intended recipient(s) and may contain confidential and/or privileged 
information.  Inadvertent disclosure of this message does not constitute a 
waiver of any privilege, right or remedy.  If you are not the intended 
recipient, please do not directly or indirectly use, disclose or distribute 
this message, and please contact the sender and delete this email, any 
attachments and all copies.  Climate and its affiliates may use, read or 
archive email communications (including attachments) through its computer 
network, as permitted by applicable law.  Climate and its affiliates (or an 
external service provider) may also scan emails and attachments on its 
computer network to ensure systems operate efficiently and to minimize 
security risks. Thank you.