[U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision
Lukasz Majewski
lukma at denx.de
Fri Feb 15 07:15:45 UTC 2019
On Wed, 13 Feb 2019 17:46:44 +0100
Krzysztof Kozlowski <krzk at kernel.org> wrote:
> Fix detection of Odroid HC1 (Exynos5422) after reboot if kernel
> disabled the LDO4/VDD_ADC regulator.
>
> The LDO4 supplies both ADC block and the ADC input AIN9. Voltage on
> AIN9 will rise slowly, so be patient and wait for it to stabilize.
>
> First reads on Odroid HC1 return 305, 1207, 1297 and finally 1308
> (reference value is 1309).
>
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> ---
> board/samsung/common/exynos5-dt-types.c | 38
> ++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1
> deletion(-)
>
> diff --git a/board/samsung/common/exynos5-dt-types.c
> b/board/samsung/common/exynos5-dt-types.c index
> af711e727a78..8aed64183837 100644 ---
> a/board/samsung/common/exynos5-dt-types.c +++
> b/board/samsung/common/exynos5-dt-types.c @@ -57,12 +57,48 @@ static
> unsigned int odroid_get_rev(void) return 0;
> }
>
> +/*
> + * Read ADC at least twice and check the resuls. If regulator
> providing voltage
> + * on to measured point was just turned on, first reads might
> require time
> + * to stabilize.
> + */
> +static int odroid_get_adc_val(unsigned int *adcval)
> +{
> + unsigned int adcval_prev = 0;
> + int ret, retries = 20;
> +
> + ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN,
> + &adcval_prev);
> + if (ret)
> + return ret;
> +
> + while (retries--) {
> + mdelay(5);
> +
> + ret = adc_channel_single_shot("adc",
> CONFIG_ODROID_REV_AIN,
> + adcval);
> + if (ret)
> + return ret;
> +
> + /*
> + * If difference between ADC reads is less than 3%,
> + * accept the result
> + */
> + if ((100 * abs(*adcval - adcval_prev) / adcval_prev)
> < 3)
> + return ret;
> +
> + adcval_prev = *adcval;
> + }
Is there in the documentation any required time to wait before reading
the ADC value?
If yes then maybe get_timer() based approach shall be used (if
get_timer() is available in this context)?
Please see for example drivers/net/fec_mxc.c for how timeouts are
handled there.
I will test this patch series on XU3 during the weekend. Thanks for
this fix :-)
> +
> + return ret;
> +}
> +
> static int odroid_get_board_type(void)
> {
> unsigned int adcval;
> int ret, i;
>
> - ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN,
> &adcval);
> + ret = odroid_get_adc_val(&adcval);
> if (ret)
> goto rev_default;
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190215/892d52ac/attachment.sig>
More information about the U-Boot
mailing list