[U-Boot] [PATCH] ARM: da8xxevm: Add NAND instructions for da850-evm to README
Adam Ford
aford173 at gmail.com
Fri Feb 15 02:13:53 UTC 2019
The README.da850 file continues information on how to burn NAND
for the LCDK, but not the DA850-EVM. This patch adds both the
commands and dip switch instructions for burning and booting
NAND.
Signed-off-by: Adam Ford <aford173 at gmail.com>
diff --git a/board/davinci/da8xxevm/README.da850 b/board/davinci/da8xxevm/README.da850
index f24e8b5342..5775b7d80f 100644
--- a/board/davinci/da8xxevm/README.da850
+++ b/board/davinci/da8xxevm/README.da850
@@ -88,6 +88,14 @@ In this case the commands would be simplified to:
U-Boot > nand erase.part bootloader
U-Boot > nand write 0xc0700000 bootloader
+On the DA850-EVM, NAND can also be written with SW7:7-8 ON and
+
+ sudo mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 \
+ -flash_noubl -flashType NAND ~/src/u-boot/u-boot.ais
+
+To boot the DA850-EVM from NAND, SW7:5 should be switched on and all others
+off.
+
Flashing the images to MMC
==========================
If the boot pins are set to boot from mmc, the RBL will try to load the
--
2.17.1
More information about the U-Boot
mailing list