[U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)

Marek Vasut marek.vasut at gmail.com
Tue Feb 19 05:07:21 UTC 2019


Perform the replacement to allow platforms use non-DM SPI flash access
in SPL/TPL. This is thus far needed on platforms with size constraints.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Jagan Teki <jagan at openedev.com>
Cc: Vignesh R <vigneshr at ti.com>
---
 cmd/sf.c                   | 4 ++--
 drivers/mtd/spi/sf_probe.c | 2 +-
 drivers/net/fm/fm.c        | 4 ++--
 env/sf.c                   | 2 +-
 include/spi_flash.h        | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/cmd/sf.c b/cmd/sf.c
index 738ef0e46d..7e92a43b2c 100644
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -84,7 +84,7 @@ static int do_spi_flash_probe(int argc, char * const argv[])
 	unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
 	unsigned int mode = CONFIG_SF_DEFAULT_MODE;
 	char *endp;
-#ifdef CONFIG_DM_SPI_FLASH
+#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
 	struct udevice *new, *bus_dev;
 	int ret;
 	/* In DM mode defaults will be taken from DT */
@@ -119,7 +119,7 @@ static int do_spi_flash_probe(int argc, char * const argv[])
 			return -1;
 	}
 
-#ifdef CONFIG_DM_SPI_FLASH
+#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
 	/* Remove the old device, otherwise probe will just be a nop */
 	ret = spi_find_bus_and_cs(bus, cs, &bus_dev, &new);
 	if (!ret) {
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 7f1378f494..4282d48f26 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -53,7 +53,7 @@ err_read_id:
 	return ret;
 }
 
-#ifndef CONFIG_DM_SPI_FLASH
+#if !CONFIG_IS_ENABLED(DM_SPI_FLASH)
 struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
 				  unsigned int max_hz, unsigned int spi_mode)
 {
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index e19d7777dc..6a5c9bbc9d 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -377,7 +377,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 		addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
 		int ret = 0;
 
-#ifdef CONFIG_DM_SPI_FLASH
+#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
 		struct udevice *new;
 
 		/* speed and mode will be read from DT */
@@ -464,7 +464,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
 	void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
 	int ret = 0;
 
-#ifdef CONFIG_DM_SPI_FLASH
+#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
 	struct udevice *new;
 
 	/* speed and mode will be read from DT */
diff --git a/env/sf.c b/env/sf.c
index b3dec82c35..ee639b90fc 100644
--- a/env/sf.c
+++ b/env/sf.c
@@ -52,7 +52,7 @@ static struct spi_flash *env_flash;
 
 static int setup_flash_device(void)
 {
-#ifdef CONFIG_DM_SPI_FLASH
+#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
 	struct udevice *new;
 	int	ret;
 
diff --git a/include/spi_flash.h b/include/spi_flash.h
index 7f691e8559..09f3896fb9 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -51,7 +51,7 @@ struct dm_spi_flash_ops {
 /* Access the serial operations for a device */
 #define sf_get_ops(dev) ((struct dm_spi_flash_ops *)(dev)->driver->ops)
 
-#ifdef CONFIG_DM_SPI_FLASH
+#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
 /**
  * spi_flash_read_dm() - Read data from SPI flash
  *
-- 
2.19.2



More information about the U-Boot mailing list