[U-Boot] [PATCH] MSCC: Fix Jaguar2 board detection.

[Daniel Schwierzeck]

Am 29.01.19 um 10:58 schrieb Horatiu Vultur:
> When power cycle the Jaguar2 boards, it couldn't read the
> phys, therefore it always deduce that the board type is
> pcb111.
> 
> Add a small delay after setting the gpio pins, fix the
> issue.
> 
> Signed-off-by: Horatiu Vultur <horatiu.vultur at microchip.com>
> ---
>  board/mscc/jr2/jr2.c | 3 +++
>  1 file changed, 3 insertions(+)
> 

applied to u-boot-mips, thanks.

-- 
- Daniel