[U-Boot] [PATCH 10/10] board: sopine: Enable SPI/SPI-FLASH

[Jagan Teki]

Sopine has Winbond SPI flash, so enable the same to use
flash on Sopine board.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi | 12 ++++++++++++
 configs/sopine_baseboard_defconfig                   |  4 ++++
 2 files changed, 16 insertions(+)
 create mode 100644 arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi

diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi b/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
new file mode 100644
index 0000000000..02b1ae046e
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard-u-boot.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan at amarulasolutions.com>
+ */
+
+#include "sunxi-u-boot.dtsi"
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig
index 9d7e3a2b6c..a94e3c21fd 100644
--- a/configs/sopine_baseboard_defconfig
+++ b/configs/sopine_baseboard_defconfig
@@ -10,11 +10,15 @@ CONFIG_MMC0_CD_PIN=""
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_SPL_SPI_SUNXI=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_CMD_SF=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-sopine-baseboard"
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-- 
2.18.0.321.gffc6fa0e3