[U-Boot] [PATCH 0/7] Add netcp networking support on K2G ICE EVM

Murali Karicheri m-karicheri2 at ti.com
Mon Feb 11 17:15:06 UTC 2019


This patch series add networking capability to K2G ICE EVM
based on netcp driver. Networking function has been tested
using the latest master branch from u-boot repo. Following
boot mode has been tested for networking.

Net boot (tftp images over ethernet interface and boot kernel)
          log at https://pastebin.ubuntu.com/p/b3nyCXPhWc/
MMC boot: (load images from boot folder of rootfs and boot kernel)
          log at https://pastebin.ubuntu.com/p/FWycmKd9KB/

Used Linux upstream linux kernel version 4.19.9 for the tests. 

Please review and apply if this looks good.

Thanks

Murali Karicheri (7):
  ARM: k2g-ice: Add pinmux support for rgmii interface
  ARM: k2g-gp-evm: update to rgmii pinmux configuration
  net: netcp: add support for phy with rgmii ids
  ARM: k2g: add a workaround to reset the phy
  k2g: config enable ti phy dp83867 for k2g
  ARM: dts: k2g-evm: remove unused phy-mode property from phy node
  ARM: dts: k2g-ice: add dt node for netcp

 arch/arm/dts/keystone-k2g-evm.dts             |  1 -
 arch/arm/dts/keystone-k2g-ice.dts             | 35 +++++++++++++
 .../mach-keystone/include/mach/hardware-k2g.h |  3 ++
 arch/arm/mach-keystone/include/mach/mux-k2g.h |  5 ++
 board/ti/ks2_evm/board_k2g.c                  | 15 ++++++
 board/ti/ks2_evm/mux-k2g.h                    | 51 +++++++++++++------
 drivers/net/ti/keystone_net.c                 | 22 +++++++-
 include/configs/k2g_evm.h                     |  1 +
 8 files changed, 116 insertions(+), 17 deletions(-)

-- 
2.17.0



More information about the U-Boot mailing list