[U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling

[Fabio Estevam]

Hi Soeren,

On Thu, Feb 28, 2019 at 4:01 PM Soeren Moch <smoch at web.de> wrote:

> Fabio,
>
> I tried to understand this patch, in order to also apply it  for the
> tbs2910 board.
> What I read from the fec_mxc driver, this only works with DM_ETH
> enabled, but this is not enabled for mx6sabresd.

Good catch. DM_ETH needs to be enabled for mx6sabresd.

However, I noticed that when using U-Boot master I can not boot
mx6sabresd anymore:

U-Boot SPL 2019.04-rc2-00134-g783e66816d (Feb 28 2019 - 16:17:32 -0300)
Trying to boot from MMC1

(It hangs here)

Abel, Peng,

Could you please take a look at this?

Thanks