[U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken

Philipp Tomsich philipp.tomsich at theobroma-systems.com
Tue Feb 12 13:54:48 UTC 2019



> On 12.02.2019, at 13:38, David Wu <david.wu at rock-chips.com> wrote:
> 
> Hi Philipp,
> 
> 在 2019/2/10 上午2:24, Philipp Tomsich 写道:
>> That said, I have been fighting issues from this patchset when trying to read
>> from devices on the i2c0 bus on a RK3399—which had me add a “simple”
>> pinctrl device again, as pulling all the dependencies into the SPL is a pain.
> 
> I think you can also add the simple ops if necessary. Full pinctrl
> should only be used at the U-boot stage, or the SPL stage where the TPL is available.
> 
> For most boards about 3288, there is no need to enable pinctrl at SPL
> stage, such as Tinker board.

Could you check whether TPL_MAX_SIZE and SPL_MAX_SIZE are correct for
the RK3288? If not, please submit a patch.

>> Unfortunately, in this merge I had to make a judgement call between insisting
>> on code-quality and getting the full pinctrl-driver merged.  With this release
>> cycle being longer and having 5 RCs, I figured we’ll have time to iron out any
>> wrinkles...
> 
> 



More information about the U-Boot mailing list